MATERIAL OVERVIEW
Characteristics: Pale yellow, soft metal, chemically similar to calcium. Soluble in alcohol and acids; decomposes water on contact. Low toxicity.
Hazards: Spontaneously flammable in powder form, ignites when heated above melting point. Reacts with water to evolve hydrogen. Store under mineral oil or argon.
To avoid oxygen contamination ESPI's strontium pieces and chips are manufactured in a dry argon environment. The finished pieces or chips are packaged for shipping in either sealed cans under dry argon, glass ampoules under dry argon, or sealed cans with a light coating of high purity mineral oil.
To view a photo of the related item hover over the icon.
GENERAL PROPERTIES
Symbol:
Sr
Atomic Number:
38
Atomic Weight:
87.62
Density:
2.54 gm/cc
Melting Point:
769 oC
Boiling Point:
1384 oC
Thermal Conductivity:
0.354W/cm/K @ 298.2 K
Electrical Resistivity:
23.0 microhm-cm @ 20 oC
Electronegativity:
1.0 Paulings
Specific Heat:
0.0719Cal/g/K @ 25 oC
Heat of Vaporization:
33.8K-Cal/gm atom at 1384 oC
Heat of Fusion:
0.295Cal/gm mole
TYPICAL ANALYSES
- Impurities in ppm
Material/Purity:
2N
Al
2000
Cl
100
Fe
500
STRONTIUM ROD
Material
Purity
Strontium Rod .500”
2N
Rod is cut to order and sold by the inch or foot. Rod can be packaged either under mineral oil or under dry argon. Additional diameters can be drawn in 2-3 days. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters or custom sizes.
Material
Purity
Strontium Chips, Cans under dry Argon
2N
Strontium Chips, Cans, light oil coating
2N
Strontium Chips, Ampoules under dry Argon
2N
Strontium Pieces 3-6mm, Cans under dry Argon
2N
Strontium Pieces 3-6mm, Cans, light oil coating 2N Strontium Pieces 1-3mm, Ampoules under dry Argon 2NPowder, shot, pellets, and ingots are packaged to order and sold by the gram or kilogram. All forms can be packaged either under mineral oil or under dry argon. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional specifications or custom requirements.
STRONTIUM COMPOUNDS
Material
Purity
Strontium Carbonate SrCO3 -20 Mesh
5N
Strontium Carbonate SrCO3 -100 Mesh
2N
Strontium Chloride SrCl2 -40 Mesh
2N
Strontium Ferrite SrFe12O19 -325 Mesh
2N5
Strontium Fluoride SrF2 1/4" to 1/8" Pieces
3N
Strontium Fluoride SrF2 -200 Mesh
3N
Strontium Fluoride SrF2 -325 Mesh
2N
Strontium Iodide SrI2 -80 Mesh
2N5
Strontium Titanate SrTiO3 -325 Mesh
3N
Strontium Tungstate SrWO4 -200 Mesh
3N
Compounds are packaged to order and sold by the gram or kilogram. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional specifications or custom requirements.
Material Safety Data Sheet - MSDS
Strontium MSDSTechnical Data Sheets
Understanding Mesh Sizes