The Pro-Fit Vario Executive socket router is our top model: it sets itself apart with a variety of ergonomic setting options and continuously variable speed selection. The machine is equipped with a suction arm that can be automatically secured in its position in one step (auto-fix system).
If you are looking for more details, kindly visit Wonderfu.
The Pro-Fit Vario Executive socket router is our top model: it sets itself apart with a variety of ergonomic setting options and continuously variable speed selection. The machine is equipped with a suction arm that can be automatically secured in its position in one step (auto-fix system).
The socket router has 3 suction options: the suction hood, floor suctioning and milling shaft suctioning. These 3 areas can be controlled separately or in combination. This means the ideal suction power level is always ensured at the desired extraction point.
Once you have pulled a thermoplastic socket and let it cool down, it is time to remove the socket from the positive mould and finish it in a few additional steps.
It is important to cut and smooth the edges of the socket correctly in order to ensure a good fit. A well-fitting socket will provide comfort and prevent injury.
Follow along as we take you through the steps to obtain a perfectly finished socket.
Once the thermoplastic socket has fully set, you can carefully remove it from the positive mould. Wait preferably 24 hours before getting started on this process. Do not try to speed up the cooling process with cold air as this can change the quality of the socket.
To remove the socket, cut along the curved edges of the plaster mould to remove the excess thermoplastic material. Then, pull the socket from the mould, or if necessary, break the (plaster) mould. Saw off the excess thermoplastic material.
Take care to not damage the thermoplastic socket in this process. If you happen to damage the socket, you can &#; in some cases &#; remove the damage by lightly sanding and smoothing the affected area.
Use a router socket machine to give the edges of your socket a first coarse grind:
Keep in mind that Orfitrans thermoplastic materials are heat sensitive and can melt under high temperatures. The grinding process can generate a lot of heat, so make sure to not keep the grinding rolls in the same position for too long.
For more information, please visit Prosthetic equipment speed Socket Router.
Now it&#;s time to polish the edges of the thermoplastic socket. Use the following materials to obtain perfectly smooth edges:
.
When the edges of the socket are finished, you can start adding accessories (e.g. valves). Create appropriate holes in the socket with the help of a milling machine or a drill. Thanks to the robust characteristics of the Orfitrans thermoplastic, you can rest assured that the material will not break, tear or shatter.
After following these steps, you will be able to give your patient a perfectly finished and highly qualitative thermoplastic socket that provides the support and comfort needed.
Interested in learning how to fabricate an Orfitrans check socket from scratch? Read our step-by-step guide.
Written by Marc Blij
Marc studied in Brussels and London and is a Certified Orthotist and Prosthetist.
After working in an O&P lab at the Universities of Louvain and Brussels, he decided to set up his own O&P lab in Antwerp. For over 30 years, he ran his own practice, together with his wife.
Since , Marc works at the Orfit Industries headquarters in Wijnegem (Belgium) as a Product and Educational Specialist in Orthotics & Prosthetics and Physical Rehabilitation.
If you&#;d like to receive the latest product updates and interesting Orfit news, subscribe to our newsletter:
For more Lower Limb Prosthesis Exporterinformation, please contact us. We will provide professional answers.