Lingchuang Yihui supply professional and honest service.
Clogged vacuum pipes reduce your surgical staff's productivity and can put your patients at risk.
Often, surgeons try to offset problems with clogged vacuum systems with portable medical suction machines. However, there are many issues with medical suction machines that can cost you time and money while impacting the quality of patient care at your healthcare facility.
In today's ever-changing healthcare environment, hospital spending is always closely guarded. Making the right decision when allocating funds when making repairs or purchasing new medical equipment is imperative. Fortunately, CHT can help you completely repair and restore your clogged vacuum pipes for less than the cost of one portable suction machine.
Here are 6 problems with trying to offset your clogged medical vacuum system with portable medical suction machines.
Bonus Content: Download our Download our free PDF on Regulatory Immunity to help you achieve Joint Commission Compliance.
6 Medical Suction Machine Problems to Avoid
1. Expensive to Purchase
Some hospitals try to offset low suction problems with portable vacuum systems. These portal vacuum systems are expensive to purchase. Paying too much for a portable system upfront is only one part of the problem. The ongoing maintenance fees and service needs can also escalate over time.
2. High Energy Usage
Portable vacuum systems can place extra demands on your healthcare facility. They are far from energy-efficient, cost-saving pieces of equipment for your healthcare facility.
3. Bulky Machine
The space constraint of your operating room is also a factor to consider when dealing with portable medical suction machines. Your equipment can take up too much space and clutter your operating rooms.
4. Noisy
Any medical suction device is going to make some noise when the vacuum kicks on. If your equipment is making it impossible to communicate with your team or if there are frequent, unexpected alarms and noises coming from the machines, your staff will not use the system.
5. Low Efficiency
Optimum vacuum flow is a necessity in the OR. Machines that do not provide enough suction or that do not work consistently will slow down regular procedures. In addition, loss of suction and inability to remove fluids and gases in a timely manner present risks to your patient. Suction from the house system keeps OR working areas clear and visible and makes the surgeon&#;s job easier.
Are you interested in learning more about surgical flush suction pipe device? Contact us today to secure an expert consultation!
6. Dangerous to Operate
Some hospitals try to fix the low suction problem by pouring medical enzyme solution into the vacuum system. It is a dangerous scenario that can cause "the biohazard to get sucked back to the main system reserve tank, which is an infectious control issue and could result in shorting out a vacuum pump."
Conclusion
Patient care is our ultimate priority. Well-informed decisions can be made before entering the operating room. Equipment running at full capacity will boost OR productivity and increase procedures, resulting in more revenue and less chance of cross-infection for your patients due to clogged vacuum piping.
If staff members struggle to get the suction they need from their clogged medical vacuum system, it may be time to consult a specialist.
Click here to talk to a medical gas specialist and optimize your vacuum system today!
photo credit: Medical
Filling out your daily surgical schedule based on estimates of how long procedures last instead of actual case times leads to a cascade of problems, including paying staff to stand around in empty ORs waiting for the next case to start.
The first way to address this issue is to realize that case times shouldn't be defined as the time that elapses between when incisions are made and when they're closed. Patients have to be positioned, prepped and anesthetized before surgery
and woken up and moved to recovery afterward. If your historic scheduled case times are recorded using start-to-end times, meaning only the length of the procedure itself, I recommend adding at least 10 minutes to that time to reflect
the more accurate in-room/out-room time.
Consider investing in a software package to evaluate your historic case time data and use that information to schedule cases based on how long they typically last, not how long you think they last. Take the additional time to break down the
data by procedure and long-term averages. Doing so is helpful if surgeons question the recorded case times and point to an extenuating circumstance with a single procedure. Having procedure-grouped data lets you show that a certain procedure
routinely takes longer than the time for which it was scheduled, and helps you make the case for adjusting the surgical schedule to improve overall efficiencies. You couldn't make your case nearly as well if you were still scheduling your
cases with a written ledger. There's no substitute for being able to present hard data derived from scheduling software to ensure case times are accurate, and staffing and supply resources are properly allocated.
Contact us to discuss your requirements of rigid endoscope procedure. Our experienced sales team can help you identify the options that best suit your needs.