How to Save Money When Buying Tristyrylphenol Ethoxylates in the Chemical Industry

24 Feb.,2025

 

Alcohol Ethoxylate Surfactant(530+) - Alibaba.com

United States Innovation and Competition Act of - GovTrack.us

Sec. . Short title; table of contents.

Sancolo supply professional and honest service.

Sec. . Appropriate congressional committees defined.

TITLE I'Trading Consistent with American values

Subtitle A'Preventing Importation of Goods Produced by Forced Labor

Sec. . Investigations of allegations of goods produced by forced labor.

Sec. . Preventing importation of seafood and seafood products harvested or produced using forced labor.

Subtitle B'Addressing Censorship and Barriers to Digital Trade

Sec. . Censorship as a trade barrier.

Sec. . Designation of official responsible for monitoring unfair trade practices of suppliers of information and communications equipment.

Sec. . Negotiation of digital trade agreements.

Subtitle C'Protecting Innovators and Consumers

Sec. . Technical and legal support for addressing intellectual property rights infringement cases.

Sec. . Improvement of anti-counterfeiting measures.

Sec. . Reports on chicken, beef, and other meat imports.

Sec. . Joint enforcement with allies with respect to importation of goods made with stolen intellectual property.

Sec. . Sense of Congress and report on ensuring reliable supply of rare earth minerals.

Subtitle D'Ensuring a Level Playing Field

Sec. . Report on manner and extent to which the Government of the People's Republic of China exploits Hong Kong to circumvent United States laws and protections.

Sec. . Assessment of overcapacity of industries in the People's Republic of China.

Sec. . Duties of Interagency Center on Trade Implementation, Monitoring, and Enforcement.

Sec. . Briefing on report related to process for excluding articles imported from the People's Republic of China from certain duties imposed under section 301 of the Trade Act of .

TITLE II'Ensuring Resiliency in Critical Supply Chains

Sec. . Facilitating trade in essential supplies.

Sec. . Supply chain database and toolkit.

TITLE III'Improving Transparency and Administration of Trade Programs and Oversight and Accountability of Trade Agencies

Sec. . Process for exclusion of articles from duties under section 301 of the Trade Act of .

Sec. . Enhanced congressional oversight of the United States Trade Representative and the Department of Commerce.

Sec. . Establishment of Inspector General of the Office of the United States Trade Representative.

Sec. . Authority of U.S. Customs and Border Protection to consolidate, modify, or reorganize customs revenue functions.

Sec. . Protection from public disclosure of personally identifiable information contained in manifests.

Sec. . Sense of Congress on leadership at World Trade Organization.

TITLE IV'Promoting American Competitiveness

Subtitle A'Reauthorization and Reform of Generalized System of Preferences

Sec. . Modification of eligibility criteria for beneficiary developing countries.

Sec. . Supplemental reviews and reporting.

Sec. . Extension of Generalized System of Preferences.

Subtitle B'Temporary Duty Suspensions and Reductions

Sec. . Reference.

PART I'New Duty Suspensions and Reductions

Sec. . Shelled pine nuts.

Sec. . Licorice extract.

Sec. . Refined Carrageenan.

Sec. . Irish dairy chocolate crumb.

Sec. . Pepperoncini, preserved in vinegar.

Sec. . Coconut water in PET bottles.

Sec. . 9,11-Octadecadienoic acid.

Sec. . Liquid galacto-oligosaccharides.

Sec. . Beverage containing coconut water.

Sec. . Animal feed additive containing guanidinoacetic acid.

Sec. . Tungsten concentrate.

Sec. . Piperylene.

Sec. . Normal paraffin M (alkanes C10'C14).

Sec. . Neodymium (Nd) metal.

Sec. . Praseodymium (Pr) metal.

Sec. . Heavy rare earth metals, dysprosium (Dy) metal and terbium (Tb) metal.

Sec. . Scandium crystal.

Sec. . Hexafluorotitanic acid.

Sec. . Silica gel cat litter with tray.

Sec. . Dioxosilane spherical particles (mean particle size 0.046'0.054 mm).

Sec. . Silica gel cat litter.

Sec. . Sulfuryl dichloride.

Sec. . FS-10D acicular electroconductive tin oxide.

Sec. . Certain potassium fluoride.

Sec. . Other potassium fluoride.

Sec. . LiPF6.

Sec. . LiPO2F2.

Sec. . Ammonium fluoroborate.

Sec. . Sodium tetrafluoroborate.

Sec. . Ferric chloride.

Sec. . Ferrous chloride.

Sec. . Cupric chloride dihydrate.

Sec. . Copper chloride anhydrous.

Sec. . Manganese chloride anhydrous.

Sec. . Manganese chloride tetrahydrate.

Sec. . Reducing agent.

Sec. . Manganese carbonate.

Sec. . Potassium tetraborate.

Sec. . Potassium pentaborate.

Sec. . Ammonium thiocyanate.

Sec. . Modified amine complex of boron trifluoride.

Sec. . Trichlorosilane.

Sec. . 1,3-Dichloropropene.

Sec. . Hexafluoroisobutylene (HFIB).

Sec. . 1,1,1,2,2,3,3,4,4,5,5,6,6-Tridecafluoro-8-iodooctane.

Sec. . Ethyl benzyl chloride.

Sec. . Perfluoroalkyl sulfonate.

Sec. . D-Mannitol.

Sec. . 3,3,4,4,5,5,6,6,7,7,8,8,8-Tridecafluorooctan-1-ol.

Sec. . Phenyl isopropanol.

Sec. . Hydroxytyrosol.

Sec. . 1,6-Dihydroxynaphthalene.

Sec. . Antioxidant for plastics and rubber.

Sec. . Toluhydroquinone (THQ).

Sec. . 1,1,1-Tris(4-hydroxyphenyl)ethane.

Sec. . mPEG6-mesylate.

Sec. . Monoethylene glycol dimethyl ether.

Sec. . Diethylene glycol dimethyl ether.

Sec. . Diethylene glycol dibutyl ether.

Sec. . Tetraethylene glycol dimethyl ether.

Sec. . Glycol diether.

Sec. . Diglycidyl resorcinol ether.

Sec. . Allyl glycidyl ether.

Sec. . Vinylcyclohexane monoxide.

Sec. . Technical grade of butyl glycidyl ether.

Sec. . Aliphatic glycidyl ether.

Sec. . Diglycidyl ether of 1,4-butanediol.

Sec. . Technical grade of the glycidyl ether of cyclohexane dimethanol.

Sec. . Glycidyl ester of neodecanoic acid.

Sec. . Cumaldehyde.

Sec. . Cyprinal.

Sec. . Sodium o-formylbenzenesulfonate.

Sec. . Acetylacetone.

Sec. . Acetyl propionyl.

Sec. . Alpha ionone.

Sec. . 2,3,4,5 Tetramethylcyclopent-2-enone.

Sec. . Menthone.

Sec. . L-Carvone.

Sec. . Benzoin.

Sec. . Methyl cyclopentenolone.

Sec. . 2,4-Dihydroxy-1,5-dibenzoylbenzene.

Sec. . Difluorobenzophenone (DFBP).

Sec. . PTMI.

Sec. . Metrafenone.

Sec. . Hexachloroacetone.

Sec. . Fire suppression agent.

Sec. . D(+)-10-Camphor sulfonic acid.

Sec. . Benzyl acetate.

Sec. . Propylene glycol diacetate.

Sec. . Isopropenyl acetate.

Sec. . Diacetin.

Sec. . Cocoamine.

Sec. . Caprylic acid 98%.

Sec. . Fine zinc myristate powder.

Sec. . Fine magnesium myristate powder.

Sec. . Dipentaerythrityl hexahydroxystearate/hexastearate/hexarosinate.

Sec. . Polyglyceryl-2 triisostearate.

Sec. . Neopentyl glycol diethylhexanoate.

Sec. . Isononyl isononate.

Sec. . Acetyl chloride.

Sec. . Potassium sorbate.

Sec. . Vinyl chloroformate.

Sec. . Permethrin.

Sec. . Sodium benzoate.

Sec. . Benzoic acid, flake.

Sec. . Diethylene glycol dibenzoate.

Sec. . Methyl benzoate.

Sec. . M-Nitrobenzoic acid sodium salt.

Sec. . p-Nitrobenzoic acid.

Sec. . 4-tert Butylbenzoic acid.

Sec. . Sodium adipate.

Sec. . Dimethyl sebacate (DMS).

Sec. . Dodecanedioic acid.

Sec. . Polyhydroxystearic acid of low acid value.

Sec. . Undecanedioic acid.

Sec. . Hexadecanedioic acid.

Sec. . Tetradecanedioic acid.

Sec. . Pentadecanedioic acid.

Sec. . Tridecanedioic acid.

Sec. . Methyl 1-(methoxycarbonyl)cyclopropanecarboxylate (CPDM).

Sec. . Calcium HHPA.

Sec. . Diethyl phthalate.

Sec. . Ammonium lactate.

Sec. . Triethyl 2-hydroxypropane-1,2,3-tricarboxylate.

Sec. . Diisostearyl malate.

Sec. . Salicylic acid.

Sec. . Hexyl salicylate.

Sec. . Alpha-ketogluteric acid.

Sec. . MCPB herbicide.

Sec. . 2,4-D Butoxyethylester.

Sec. . 2-(2,4-Dichlorophenoxy)acetic acid.

Sec. . Diglycolic acid 98%.

Sec. . Tri-iso-butyl phosphate (TiBP).

Sec. . Trimethylphosphite.

Sec. . Organic phosphite.

Sec. . Diethyl sulfate.

Sec. . Diethyl carbonate.

Sec. . Ethyl methyl carbonate.

Sec. . Tetradecoxycarbonyloxy tetradecyl carbonate.

Sec. . Dicetyl peroxydicarbonate.

Sec. . Tetraethyl silicate.

Sec. . tert-Octylamine.

Sec. . Octadecylamine.

Sec. . N'-(3-Aminopropyl)-N'-dodecylpropane-1,3-diamine.

Sec. . 1,10-Diaminodecane.

Sec. . 1,5-Pentanediamine.

Sec. . Dicyclohexylamine.

Sec. . Amantadine hydrochloride 99%.

Sec. . N,N-Dimethylaniline.

Sec. . Paranitroaniline (PNA).

Sec. . Dicloran.

Sec. . N,N-Dimethyl-p-toluidine.

Sec. . Pendimethalin technical.

Sec. . Benzyldimethylamine.

Sec. . Diphenyl diphenylene diamine.

Sec. . Curative for epoxy resin systems.

Sec. . TFMB.

Sec. . S-N-Alkyl-anilin.

Sec. . p-Cresidine.

Sec. . Iminodiacetic acid.

Sec. . 11 Aminoundecanoic acid.

Sec. . L-Orinithine L-aspartate.

Sec. . Iron sodium DTPA.

Sec. . Iron glycinate complex.

Sec. . Copper glycinate complex.

Sec. . Zinc glycinate complex.

Sec. . Manganese glycinate complex.

Sec. . Iron sodium EDDHA.

Sec. . DMF-DMA.

Sec. . Mixtures of DMSO and tetrabutyl ammonium fluoride.

Sec. . Betaine.

Sec. . Prolonium chloride in aqueous solution.

Sec. . N,N-Dimethylacetamide.

Sec. . N,N-Dimethylformamide.

Sec. . DAAM.

Sec. . L-Alanyl L-glutamine.

Sec. . Granular acrylamido-tert-butyl sulfonic acid (ATBS).

Sec. . Glycyl-L-glutamine hydrate.

Sec. . Noviflumuron.

Sec. . Propanil technical.

Sec. . Hexaflumuron.

Sec. . Stabilizer for plastics and rubber.

Sec. . 2-Amino-5-chloro-N,3-dimethylbenzamide.

Sec. . Glycyl-L-tyrosine dihydrate.

Sec. . L-Alanyl-L-tyrosine.

Sec. . Enzalutamide ITS-2.

Sec. . 4-Bromo-2-fluoro-N-methylbenzamide.

Sec. . N-Boc-1-aminocyclobutanecarboxylic acid.

Sec. . N'-(1,3-dimethylbutylidene)-3-hydroxy-2-naphthohydrazide (BMH) (oil treated).

Sec. . Guanidine sulfamate.

Sec. . Liquid, blocked cycloaliphatic diamine used as crosslinker for polyisocyanate resins.

Sec. . 3,4-Difluorobenzonitrile.

Sec. . 2-Amino-5-cyano-N,3-dimethylbenzamide.

Sec. . TFMPA.

Sec. . Dimethyl 2,2'-Azobisisobutyrate.

Sec. . Antioxidant/metal deactivator.

Sec. . Benzyl carbazate.

Sec. . Benzene-1,3-dicarbohydrazide.

Sec. . Input for resins, coatings, and other products.

Sec. . Aldicarb.

Sec. . Flubendiamide.

Sec. . Benzobicyclon.

Sec. . Diphenylsulfone (DPS).

Sec. . Phenolic antioxidant.

Sec. . Phenolic antioxidant and heat stabilizer.

Sec. . Phenylchlorothioformate (PTCFM).

Sec. . Methylene bis thiocyanate.

Sec. . Oxamyl.

Sec. . L-Cystine.

Sec. . L-Cysteine.

Sec. . N,N'-Bis-L-alanyl-L-cystine.

Sec. . Lubricant additive.

Sec. . Sodium benzenesulfinate.

Sec. . Thio-ether based co-stabilizer for plastics.

Sec. . L-Cysteine hydrate hydrochloride.

Sec. . Dimercaprol.

Sec. . Monoammonium salt of glyphosate.

Sec. . THPC.

Sec. . Flame retardant for textiles.

Sec. . Glyphosate.

Sec. . Ethephon.

Sec. . Benzene phosphinic acid.

Sec. . HEDP.

Sec. . Trimethylchlorosilane.

Sec. . Chloro-(chloromethyl)-dimethylsilane.

Sec. . Silicone for electronics cleaners.

Sec. . Silicon carrier fluid for active lotions, creams.

Sec. . Vinyltrimethoxysilane.

Sec. . n-Octyltriethoxysilane.

Sec. . Dimethylbis(s-butylamino)silane.

Sec. . Aqueous solution of potassium methyl siliconate.

Sec. . Octyltrimethoxysilane.

Sec. . Octlytriethoxysilane.

Sec. . Amino-propyl-triethoxysilane.

Sec. . Methyltris(sec-butylamino)silane.

Sec. . Methyltris(methylethylketoximino)silane (MOS).

Sec. . Heptamethyltrisiloxane.

Sec. . Tetramethyldisiloxane.

Sec. . Dimethylchlorosilane.

Sec. . Dichloromethylsilane.

Sec. . Tris(TFP)-methylcyclo-trisiloxane DR.

Sec. . Tetravinyltetramethylcyclotetrasiloxane.

Sec. . Divinyltetramethyldisiloxane.

Sec. . Input for plant protection agent.

Sec. . Strawberry furanone.

Sec. . Emamectin benzoate.

Sec. . Gibberellic acid.

Sec. . Rose oxide.

Sec. . Vinylene carbonate.

Sec. . Kasugamycin technical.

Sec. . 2H-Cyclododeca[b]pyran.

Sec. . Bixafen.

Sec. . Fluxapyroxad.

Sec. . 3,5 Dimethylpyrazole.

Sec. . Pyraclonil.

Sec. . Imidazolidinyl urea.

Sec. . Allantoin.

Sec. . Emulsifiable concentrate of Imazalil fungicide.

Sec. . Technical cyazofamid fungicide.

Sec. . Imazalil sulfate.

Sec. . 1,2-Dimethylimidazole.

Sec. . 2-Methylimidazole flakes.

Sec. . Diazolidinyl urea.

Sec. . 1-(2-Aminoethyl)imidazolidin-2-one (AEEU).

Sec. . Zinc pyrithione.

Sec. . Technical Pyriofenone fungicide.

Sec. . Picoxystrobin.

Sec. . Triclopyr BEE.

Sec. . Imazapyr.

Sec. . Tetraniliprole.

Sec. . Cyantraniliprole.

Sec. . Chlorantraniliprole.

Sec. . Chlorpyrifos.

Sec. . Technical Cyclaniliprole insecticide.

Sec. . Regorafenib.

Sec. . N-Butyl-TAD.

Sec. . Hindered amine light stabilizer and phenolic antioxidant.

Sec. . 4-Hydroxy-TEMPO.

Sec. . 2,2,6,6-tetramethylpiperidin-4-ol (TMP).

Sec. . 5-Bromo-2-(3-chloropyridin-2-yl)pyrazole-3-carboxylic acid.

Sec. . 2-Chloro-5-(trifluoromethyl)pyridine.

Sec. . Picarbutrox.

Sec. . 5-amino-3-(trifluromethyl) picolinonitrile (T).

Sec. . Dextromethorphan hydrobromide.

Sec. . Ipflufenoquin.

Sec. . THQ.

Sec. . Pyrithiobac sodium.

Sec. . Larotrectinib sulfate.

Sec. . Ibrutinib.

Sec. . Orthosulfamuron.

Sec. . 5-Bromopyrimidine.

Sec. . Butylthion.

Sec. . P-.

Sec. . Carfentrazone Technical.

Sec. . UV absorber 928.

Sec. . UV absorber for industrial coatings.

Sec. . Uniconazole-P.

Sec. . VcMMAE.

Sec. . UVA 360.

Sec. . Trofinetide.

Sec. . Flurazole.

Sec. . Oxathiapiprolin.

Sec. . Certain antimicrobial.

Sec. . Rubber accelerator.

Sec. . 2-Amino benzothiazole.

Sec. . Technical Isofetamid fungicide.

Sec. . Clomazone Technical.

Sec. . NEM salt.

Sec. . AMTC wet cake.

Sec. . Photoinitiator 369.

Sec. . Isatoic anhydride.

Sec. . Oclacitinib maleate.

Sec. . Thiencarbazone-methyl.

Sec. . Penoxsulam technical herbicide.

Sec. . Ethyl 2-sulfamoylbenzoate.

Sec. . Sulfosulfuron.

Sec. . Pyrimisulfan.

Sec. . Purified steviol glycoside, rebaudioside A.

Sec. . Glucosylated steviol glycosides.

Sec. . Hydroxypropyl gamma cyclodextrin.

Sec. . Hydroxypropylated beta cyclodextrin.

Sec. . Methyl beta cyclodextrin.

Sec. . 2'-Fucosyllactose.

Sec. . Ascorbyl glucoside.

Sec. . Dimethylamine borane (DMAB).

Sec. . Elderberry extract concentrate.

Sec. . Disperse Yellow 241.

Sec. . Disperse Orange.

Sec. . Mixtures of Disperse Yellow FD and acetic acid.

Sec. . Disperse Blue 54.

Sec. . Mixtures of several disperse dyes.

Sec. . Mixtures of 4 disperse blue dyes.

Sec. . Mixtures of 4 dyes.

Sec. . Disperse Red 86.

Sec. . Disperse Violet 1.

Sec. . Disperse Blue 60.

Sec. . Mixtures of Disperse Orange 29, Disperse Red 167:1, and Disperse Blue 56.

Sec. . Disperse Yellow 54.

Sec. . Acid Violet 48.

Sec. . Acid Blue 280.

Sec. . Acid Brown 282.

Sec. . Acid Red 131.

Sec. . Acid Red 249.

Sec. . Acid Yellow 236.

Sec. . Acid Red 407.

Sec. . Acid Yellow 220.

Sec. . Acid Yellow 232.

Sec. . Acid Yellow 235.

Sec. . Acid Yellow 151.

Sec. . Acid Violet 43.

Sec. . Acid Red 33.

Sec. . Acid Black 52.

Sec. . Acid Black 2.

Sec. . Acid Green 25.

Sec. . Basic Brown 23.

Sec. . Basic Violet 11:1 rhodamine dye.

Sec. . Basic Yellow 37.

Sec. . Basic Violet 3.

Sec. . Direct Orange 118.

Sec. . Direct Blue 86.

Sec. . Direct Blue 199.

Sec. . Direct Black 168.

Sec. . Direct Red 227.

Sec. . Direct Yellow 107.

Sec. . Direct Green 26.

Sec. . Direct Yellow 11.

Sec. . Direct Orange 15.

Sec. . Direct Brown 44.

Sec. . Direct Red 81.

Sec. . Direct Yellow 142.

Sec. . Direct Red 80.

Sec. . Direct Red 16.

Sec. . Direct Red 254.

Sec. . Colorant.

Sec. . Direct Yellow 34.

Sec. . Vat Orange 2 dye powder.

Sec. . Vat Violet 13 dye.

Sec. . Vat Brown 3 dye.

Sec. . Vat Red 10 dye powder.

Sec. . Vat Brown 57 dye.

Sec. . Vat Red 31 dye powder.

Sec. . Dye mixtures of Vat Brown 3 and Vat Black 27.

Sec. . Vat Red 13.

Sec. . Vat Yellow 2 dye powder.

Sec. . Vat Yellow 33 dye.

Sec. . Vat Green 1 dye.

Sec. . Vat Green 3.

Sec. . Vat Blue 6 dye.

Sec. . Vat Blue 20 dye.

Sec. . Vat Violet 1.

Sec. . Vat Brown 1 dye.

Sec. . Vat Black 16 dye.

Sec. . Vat Black 25.

Sec. . Vat Black 27.

Sec. . Reactive Yellow 145.

Sec. . Reactive Red 195.

Sec. . Reactive Blue 49.

Sec. . Reactive Blue 72.

Sec. . Reactive Yellow 95 powder.

Sec. . Reactive Red 245.

Sec. . Reactive Brown 11.

Sec. . Mixtures of Reactive Black 5 (Na) (FKP), Reactive Scarlet F01', and Reactive Orange 131.

Sec. . Reactive Yellow F98'.

Sec. . Dye mixtures of Reactive Orange 131 and Reactive Scarlet F07'.

Sec. . Reactive Black 31.

Sec. . Reactive Red 120.

Sec. . Reactive Blue 5.

Sec. . Reactive Orange 13.

Sec. . Reactive Orange 12.

Sec. . Pigment Red 177.

Sec. . Pigment Yellow 110.

Sec. . Pigment Yellow 147.

Sec. . Pigment Orange 64.

Sec. . Pigment Blue 29.

Sec. . Pigment Violet 15.

Sec. . Pigment Blue 14.

Sec. . Solvent Blue 97.

Sec. . Solvent Green 5.

Sec. . Solvent Yellow 98.

Sec. . Solvent Green 7.

Sec. . Solvent Red 195.

Sec. . Solvent Orange 115.

Sec. . Specialty dyes.

Sec. . Solvent Green 3.

Sec. . Solvent Blue 36.

Sec. . Mixtures of Solvent Green 3.

Sec. . Solvent Red 52.

Sec. . Solvent Red 149.

Sec. . Solvent Red 207.

Sec. . Solvent Violet 14.

Sec. . Solvent Yellow 179.

Sec. . Solvent Yellow 131.

Sec. . Hogen Blue XB-20.

Sec. . Solvent Yellow 104.

Sec. . Combination of Fluorescent Brighteners 367 and 371.

Sec. . Fluorescent Brightener CBS-X.

Sec. . Optical Brightener SWN.

Sec. . C.I. Fluorescent Brightener 199:1.

Sec. . Fluorescent Brightener 368.

Sec. . 1,4-Bis(2-cyanostyryl)benzene.

Sec. . Certain manufacturing inputs.

Sec. . Cerium sulfide pigments.

Sec. . Matte pearlescent pigments.

Sec. . Angle-dependent interference pigments.

Sec. . Inorganic Lumilux.

Sec. . Ribbon/Matrix Resin.

Sec. . Bonding agent .

Sec. . Fluoropolymer resin.

Sec. . Zirconium 12 paint drier.

Sec. . Zirconium 24 paint drier.

Sec. . Drier accelerators.

Sec. . Lemon oil.

Sec. . Sulfonic acids, C14'17-sec-alkane, sodium salt.

Sec. . Potassium ethyl octylphosphonate.

Sec. . Intermediate in the production of industrial lubricants.

Sec. . Polyether dispersant.

Sec. . D-Glucopyranose.

Sec. . 2-Dodecoxy-6-(hydroxymethyl)oxane-3,4,5-triol.

Sec. . Mixtures of certain C12'14-alkyl ethers.

Sec. . Manufacturing chemical.

Sec. . Nonionic surfactant.

Sec. . Chemical used in textile manufacturing.

Sec. . Ethoxylated tristyrylphenol phosphate potassium salt.

Sec. . Sodium polycarboxylate, aqueous solution.

Sec. . Aqueous emulsion of a mixture of amine soaps and miscellaneous other additives.

Sec. . Aqueous dispersion of a mixture of fatty amine and amide soaps and miscellaneous other additives.

Sec. . Aqueous dispersion of a mixture of fatty amine and amide soaps and miscellaneous other additives.

Sec. . Photographic gelatin.

Sec. . Ice fountains (class 1.4G).

Sec. . Magic candles containing magnesium powder.

Sec. . Party snappers (Class 1.4G).

Sec. . Fenpyroximate 5SC.

Sec. . Pyrifluquinazon 20SC.

Sec. . Imidacloprid and Muscalure formulations.

Sec. . Formulations of acephate and bifenthrin.

Sec. . Fipronil.

Sec. . Aluminum phosphide.

Sec. . Magnaphos formulations.

Sec. . Formulated oxamyl.

Sec. . Formulated fungicides.

Sec. . Certain fungicides.

Sec. . Prothioconazole, Fluopyram, and Trifloxystrobin fungicides.

Sec. . Prothioconazole, Metalaxyl, and Tebuconazole fungicides.

Sec. . Mancozeb and Chlorothalonil formulations.

Sec. . Mixtures of Picarbutrox and application adjuvants.

Sec. . Mixtures of Tetraconazole and application adjuvants.

Sec. . Mancozeb and Azoxystrobin formulations.

Sec. . Mixtures of Cymoxanil and fumed dioxosilane.

Sec. . Microthiol formulations.

Sec. . Formulations of thiencarbazone-methyl, Iodosulfuron-methyl-sodium, and dicamba.

Sec. . Thiencarbazone-methyl, Isoxadifenethyl, and Tembotrione herbicides.

Sec. . Herbicides used on grasses.

Sec. . Thiencarbazone-methyl, Isoxaflutole, and Cyprosulfamide herbicides.

Sec. . Thiencarbazone-methyl and Iodosulfuron-methylsodium herbicides.

Sec. . Thiencarbazone-methyl and Mefenpyr-diethyl herbicides.

Sec. . Thifensulfuron-methyl and Tribenuron-methyl formulations.

Sec. . Tribenuron-methyl formulations.

Sec. . Chlorsulfuron and metsulfuron-methyl formulations.

Sec. . Thifensulfuron-methyl and Fluroxypyr formulations.

Sec. . Aciflurofen formulations.

Sec. . S-Metolachlor and Mestrione herbicides.

Sec. . Metribuzin formulations.

Sec. . Pendimethaline and Metribuzine formulations.

Sec. . Formulations of S-Metolachlor and Metribuzin.

Sec. . Thifensulfuron-methyl and Tribenuron-methyl formulations.

Sec. . Metsulfuron-methyl formulations.

Sec. . Chlorimuron-ethyl formulations.

Sec. . Mixtures of Bromoxynil octanoate and Bromoxynil heptanoate.

Sec. . Sulfometuron-methyl and Metsulfuron-methyl formulations.

Sec. . Chlorimuron-ethyl and Tribenuron-methyl formulations.

Sec. . Formulations containing Tiafenacil.

Sec. . Diuron 80.

Sec. . Flazasulfuron herbicides.

Sec. . Thifensulfuron-methyl formulations.

Sec. . Herbicide for farm and ranch use.

Sec. . Propanil formulations.

Sec. . Thifensulfuron formulations.

Sec. . Tolpyralate and Nicosulfuron herbicides.

Sec. . Mixtures of magnesium salts and application adjuvants.

Sec. . Nisin formulations.

Sec. . Certain fixatives.

Sec. . Fuel oil additives: cold flow improvers containing poly(ethylene-co-ethenyl acetate).

Sec. . Fuel oil additives: cold flow improvers containing fumarate vinyl acetate co-polymer.

Sec. . Crude oil additives: cold flow improvers containing fumarate vinyl acetate copolymer.

Sec. . Pour point depressants.

Sec. . Fuel oil additives: cold flow improvers containing poly (ethylene-co-ethenyl acetate and vinyl 2-ethyl hexanoate).

Sec. . Poly(isobutylene) hydroformylation products.

Sec. . Input for rubber products.

Sec. . Mixtures of oligomers as general antioxidants for rubber tires.

Sec. . Benzene, 2,4-diisocyanato-1,3,5-tris(1-methylethyl)-, homopolymer.

Sec. . Aromatic amine antioxidants.

Sec. . Antioxidant blends.

Sec. . Antioxidant blends to protect polymers.

Sec. . Synthetic hydrotalcite coated with fatty acid and magnesium stearate.

Sec. . Silica scorch retarders and polymerization inhibitors.

Sec. . Synthetic hydrotalcite.

Sec. . Light stabilizers for construction products.

Sec. . Light stabilizer for plastics.

Sec. . Preparations of bis(2,4-dichlorobenzoyl) peroxide 50 percent paste.

Sec. . Distilled tall oils.

Sec. . Pyridine, alkyl derivatives.

Sec. . Polyisocyanate crosslinking agents.

Sec. . Bonding agent mixtures.

Sec. . Liquid, chemically modified amine complex of boron trifluoride.

Sec. . Phthalocyanine derivative.

Sec. . Mixtures of Cocamidopropyl betaine, glycol distearate, Laureth-4, and water.

Sec. . Mixtures of tall oil mono-, di-, and triglycerides.

Sec. . Tallow-bis(2-hydroxyethyl) amines.

Sec. . Additive mixtures for metalworking fluids.

Sec. . Naphthenic acids.

Sec. . Hydroxytyrosol powders.

Sec. . Secondary alcohol ethoxylates.

Sec. . Ethylene glycol dimerate.

Sec. . Two-part liquid silicone kits.

Sec. . Hydrophobic precipitated silica.

Sec. . Silane, trimethoxyoctyl-, hydrolysis products.

Sec. . 1,1,1-Trimethyl-N-(trimethylsilyl)silanamine hydrolysis products.

Sec. . Waterborne epoxy curing agents.

Sec. . Preparations based on 1-phenylicosane-1,3-dione.

Sec. . Mixtures of 2-Mercaptopropionic acid, methyl ester, O-ethyl dithiocarbonate.

Sec. . Epoxy curing agents.

Sec. . Aliphatic amine curing agents.

Sec. . Non-halogenated flame retardants.

Sec. . Ligaphob N 90.

Sec. . Organomodified siloxane.

Sec. . Methyl palmitate-stearate, hydrogenated.

Sec. . Olfine E.

Sec. . Certain non-halogenated flame retardants.

Sec. . Flame retardants.

Sec. . Preparations based on acetyl hexapeptide-8 and pentapeptide-18.

Sec. . Lithium silicon oxide.

Sec. . Branched olefin from propylene polymerization.

Sec. . Polypropylene pellets.

Sec. . Propylene-ethylene copolymer.

Sec. . Ethylene-propylene copolymers.

Sec. . Benzene alkylated with polypropylene.

Sec. . Chlorinated polyolefin.

Sec. . Adsorbent resin.

Sec. . Vinyl chloride-hydroxypropyl acrylate copolymer.

Sec. . Vinyl chloride ethylene copolymer with hydrophic properties.

Sec. . Fluids with boiling points above 170 °C.

Sec. . Formulations of functionalized perfluoropolyether.

Sec. . Perfluoropolyether-urethane acrylate.

Sec. . PVDF homopolymer/PVDF/CTFE copolymer mixtures.

Sec. . Chemically modified PVDF.

Sec. . Fluoropolymer, fluoroethylene-alkyl vinylether alternative copolymers.

Sec. . Copolymer of vinyl acetate and higher vinyl esters.

Sec. . Food-grade vinyl acetate copolymer.

Sec. . Vinyl chloride ethylene with enhanced properties.

Sec. . Vinyl acetate ethylene copolymer with enhanced properties.

Sec. . Food-grade polyvinyl acetate homopolymers.

Sec. . Acrylic acid/vinylsulphonate random copolymers.

Sec. . Poly(methyl methacrylate) microspheres.

Sec. . Methyl methacrylate crosspolymer microspheres.

Sec. . Styrene acrylate copolymer with enhanced properties.

Sec. . Copolymer for dental use.

Sec. . Vinyl phosphonic acid, acrylic acid copolymer, 20 percent solution in water.

Sec. . Polyacrylate 33.

Sec. . AA/AMPS copolymer.

Sec. . Flocculant dry polyacrylamides.

Sec. . Sorbitol, propylene oxide, ethylene oxide polymer.

Sec. . Trimethoxysilylpropylcarbamate-terminated polyether.

Sec. . Dimethoxy(methyl)silylmethylcarbamate-terminated polyether.

Sec. . Curing agent is used in two- or three-parts epoxy systems.

Sec. . Polyethylene glycol 450.

Sec. . Medicinal intermediate for investigational use.

Sec. . Pegcetacoplan.

Sec. . Aqueous solutions of carboxylic acid-copolymer-salt in water.

Sec. . Aqueous solutions of a modified polymer bearing hydrophilic and hydrophobic groups.

Sec. . Dimethylamine/epichlorohydrin/ethylenediamine copolymer.

Sec. . Linear hydroxyl-terminated aliphatic polycarb diol.

Sec. . Short hollow PET fibers.

Sec. . Polytetrahydrofuran.

Sec. . Crystalline polyesters.

Sec. . Liquid crystal polymers.

Sec. . Branched polyesters.

Sec. . High molecular weight co-polyester.

Sec. . High molecular weight co-polyester.

Sec. . Polyester-polyamide dispersants.

Sec. . Nylon-12 micro-spheres.

Sec. . Short nylon-66 fibers.

Sec. . Short nylon 6 fibers, colored.

Sec. . Short triangular nylon 6 fibers.

Sec. . Short star-shaped nylon 6 fibers.

Sec. . Short heart-shaped nylon 6 fibers.

Sec. . PA510 polymer compounds.

Sec. . MXD6 polymer compounds.

Sec. . PA10T polymer compounds.

Sec. . PA10T/10I polymer compounds.

Sec. . Polyurethane aqueous resins.

Sec. . Aqueous resin.

Sec. . Aliphatic polyisocyanate.

Sec. . IPDI and HDI based aliphatic polyisocyanate.

Sec. . HDI/Trimethylol hexyllactone crosspolymer micro-spheres.

Sec. . HDI/PPG/Polycaprolactone crosspolymer micro-spheres.

Sec. . Aromatic isocyanate prepolymer.

Sec. . Blocked polyisocyanate containing solvent.

Sec. . Polyisocyanate adduct for powder coatings.

Sec. . Blocked polyisocyanate for use in can and coil applications.

Sec. . Polydimethylsiloxane.

Sec. . Silicone resins.

Sec. . Methoxyfunctional methyl-phenyl polysiloxane.

Sec. . Hydrogenpolysiloxane.

Sec. . Methyl silicone resins.

Sec. . Trimethylsiloxysilicate.

Sec. . Epoxy functional polydimethylsiloxane.

Sec. . Polymethylhydrogensiloxane.

Sec. . Vinyl terminated siloxanes.

Sec. . Silicone hybrid resin (solvent free).

Sec. . Hydrogenated polycyclopentadiene resin.

Sec. . Water dispersable HDI based polyisocyanate.

Sec. . Cyanate ester resins for high-end electronic, aerospace, and industrial applications.

Sec. . Polyethyleneimine, component used in manufacturing medical devices.

Sec. . Polyhexanide.

Sec. . Ethylene-norbornene copolymer.

Sec. . Cellulose powder.

Sec. . Polymaltotriose.

Sec. . Chitosan.

Sec. . Plastic drinking straws.

Sec. . Garden hoses.

Sec. . Plastic fittings of perfluoroalkoxy.

Sec. . Low density polyethylene (LDPE) sheeting.

Sec. . Biaxially oriented dielectric polypropylene film.

Sec. . Biaxially oriented polypropylene (BOPP) capacitor-grade film.

Sec. . Polyester capacitor-grade film.

Sec. . Acid form membranes.

Sec. . Melamine resin foam.

Sec. . Infant bathtubs and basins, of plastics.

Sec. . Boxes, cases, crates, and similar articles of plastics.

Sec. . Nozzles, black, of polypropylene.

Sec. . Tip/cap combinations of polyethylene.

Sec. . Bottles made of LDPE.

Sec. . Plastic nasal irrigator caps for neti pots.

Sec. . Toy character bottle toppers.

Sec. . Melamine platters, other than those presented in sets.

Sec. . Melamine plates, other than those presented in sets.

Sec. . Melamine bowls not presented in sets.

Sec. . Melamine trays not presented in sets.

Sec. . Plastic measuring cups and spoons in sets.

Sec. . Liquid measuring cups.

Sec. . Self-anchoring beverage containers.

Sec. . PVC infant bathtub mats.

Sec. . Reversible playmats.

Sec. . Craft mats.

Sec. . Hangers.

Sec. . Infant bath rinsing cups.

Sec. . Bathtub spout covers.

Sec. . Infant teethers.

Sec. . Lighted dog fetch toys.

Sec. . Certain thermoplastic nylon 3-gang switch wallplates.

Sec. . Manual plastic disposable cutlery dispensers.

Sec. . Ear bulb syringes of clear silicone.

Sec. . PVC inflatable pillows.

Sec. . Self-inflatable queen air mattresses.

Sec. . Plastic clip fasteners.

Sec. . Self-venting spouts for diesel exhaust fluid.

Sec. . Plastic pet carriers.

Sec. . Plastic mixing tips.

Sec. . Cable ties of plastics.

Sec. . Flexible camera mountings.

Sec. . Three-piece camera mount sets.

Sec. . Magnetic swivel clips for cameras.

Sec. . Helmet camera mounts.

Sec. . Short extension poles for use with cameras.

Sec. . Long extension poles for cameras.

Sec. . Swivel mounts for cameras.

Sec. . Tripod camera mounts.

Sec. . Bulk hydraulic hoses.

Sec. . Brake hydraulic hoses.

Sec. . Bulk fabric/metal-reinforced rubber hoses.

Sec. . Disposable gloves.

Sec. . Reusable gloves.

Sec. . Dog and cat apparel.

Sec. . Polycarbonate vanity cases.

Sec. . Aluminum vanity cases.

Sec. . Suitcases with outer surface of aluminum with built-in zipper locks.

Sec. . Drawstring backpacks with zippered pocket.

Sec. . Laminated recycled reusable shopping tote bags.

Sec. . Tote bags of paper yarn.

Sec. . Reusable shopping style tote bags.

Sec. . Waterproof tote bags.

Sec. . Waterproof duffle bags.

Sec. . Waterproof zippered bags, without handles, of plastic sheeting.

Sec. . Waterproof backpacks.

Sec. . Waterproof waist packs.

Sec. . Guitar cases.

Sec. . Jewelry boxes.

Sec. . Silicone rubber camera cases with straps.

Sec. . Leather gloves with flip mitts for hunting.

Sec. . Men's leather gloves valued at $18 or more per pair.

Sec. . Belts of calf skin.

Sec. . Bamboo engineered flooring: 12.5'12.9 mm thick.

Sec. . Bamboo engineered flooring: 14.1'14.5 mm thick.

Sec. . Bamboo engineered flooring: 15.7'16.1 mm thick.

Sec. . Strand bamboo flooring: 12.5'12.9 mm thick.

Sec. . Strand bamboo flooring: 14.1'14.5 mm thick.

Sec. . Strand bamboo flooring: 10.9'11.3 mm thick.

Sec. . Chopsticks made of bamboo.

Sec. . Drying racks of wood.

Sec. . Bamboo skewers.

Sec. . Wood blinds with louvered slats.

Sec. . 100 percent cotton woven crimped unbleached fabric.

Sec. . Woven fabrics of cotton, containing 85 percent or more by weight of cotton, not more than 200 grams per square meter.

Sec. . 100 percent cotton woven bleached fabric pieces, open weave.

Sec. . Incontinence underpad fabrics of cotton.

Sec. . Woven fabrics of cotton with an average yarn number between 55 and 60.

Sec. . Woven fabric of cotton of yarn number 69 or higher.

Sec. . Woven fabrics of cotton with an average yarn number exceeding 68.

Sec. . Incontinence underpad fabrics, cotton, plain weave, of yarn number 42 or lower.

Sec. . Incontinence underpad fabrics, cotton, plain weave, of yarn number between 43 and 68.

Sec. . Incontinence underpad fabrics, bleached.

Sec. . Incontinence underpad fabrics, printed.

Sec. . Untwisted filament polyvinyl alcohol yarn, measuring 1,100 to 1,330 decitex.

Sec. . Untwisted filament polyvinyl alcohol yarn.

Sec. . Polypropylene (PP) monofilament.

Sec. . Acrylic fiber tow with an average decitex of 0.9.

Sec. . Black polyester bi-component fibers.

Sec. . Acrylic staple fibers with an average decitex of 2.2, fiber length of 100 mm.

Sec. . Modacrylic staple fibers not processed for spinning.

Sec. . Short polypropylene fibers.

Sec. . Polyoxadiazole fibers.

Sec. . Artificial staple fibers of viscose rayon, 38'42 mm in length.

Sec. . Artificial fibers of viscose rayon for the manufacture of feminine hygiene products.

Sec. . Flame retardant rayon fibers, measuring 4.78 decitex.

Sec. . Flame retardant rayon fibers, measuring 4.55 decitex.

Sec. . Flame retardant rayon fibers, measuring 4.4 decitex.

Sec. . Other flame retardant rayon fibers.

Sec. . Cellulosic man-made viscose rayon staple fibers, measuring 1.3'1.5 decitex.

Sec. . Viscose rayon staple fibers, measuring 1.5'1.67 decitex, with a fiber length of 38'42 mm.

Sec. . Cellulosic man-made viscose rayon staple fibers, measuring 1.67'2 decitex.

Sec. . Viscose rayon staple fibers, measuring 1'2 decitex, with a fiber length of 4'8 mm.

Sec. . Viscose staple fibers used in textile, medical, or hygiene applications.

Sec. . Viscose rayon staple fibers, measuring 1.51'2 decitex, with a fiber length of 8'16 mm.

Sec. . Viscose rayon staple fibers, measuring 1'1.5 decitex, with a fiber length of 8'16 mm.

Sec. . Flame retardant viscose rayon staple fibers, with a decitex of 4.7 mm and a fiber length of 51'60 mm.

Sec. . Viscose rayon staple fibers for nonwoven production.

Sec. . Black viscose rayon staple fibers.

Sec. . Acrylic or modacrylic staple fibers with a decitex of 3'5.6.

Sec. . Made up hand-cast string-drawn fishing nets.

Sec. . Knitted carpets containing 75 percent or more of cotton, with a rubber backing.

Sec. . Knitted carpets containing 75 percent or more by weight of polyester, with a rubber backing.

Sec. . Faux leather fabrics.

Sec. . Grass catcher bags.

Sec. . Oxygenation membrane capillary material.

Sec. . Textile knitted fabrics composed of micromodal and elastane.

Sec. . Textile technical knitted fabrics combining technical cotton and elastane.

Sec. . Textile knit fabrics of modal, cashmere, and spandex.

Sec. . Women's and girls' dresses, knitted or crocheted, of synthetic fibers infused with minerals.

Sec. . Women's and girls' skirts and divided skirts of synthetic fibers infused with minerals.

Sec. . Women's and girls' knit cardigans or pullovers containing 70 percent or more of silk.

Sec. . Men's and boys' knit cardigans or pullovers of linen.

Sec. . Babies' knit sweaters, pullovers, sweatshirts, waistcoats (vests), and cardigans, of artificial fibers.

Sec. . Women's and girls' tops, knitted or crocheted, of man-made fibers infused with minerals.

Sec. . Men's and boy's tops, knitted or crocheted, of man-made fibers infused with minerals.

Sec. . Men's 3 mm wetsuits.

Sec. . Men's 5.5 and 6.5 mm wetsuits.

Sec. . Men's 3.5 mm wetsuits.

Sec. . Men's 4.5 mm wetsuits.

Sec. . Women's 3 mm wetsuits.

Sec. . Women's 3.5 mm wetsuits.

Sec. . Women's 4.5 mm wetsuits.

Sec. . Women's 5.5 and 6.5 mm wetsuits.

Sec. . Insulated handmuffs of knit polyester.

Sec. . Men's stockingfoot wader bottom subassemblies, of compressed neoprene.

Sec. . Men's stockingfoot wader bottom subassemblies, of non-compressed neoprene.

Sec. . Fishing wader pocket pouch assemblies.

Sec. . Women's coats of man-made woven fibers.

Sec. . Men's or boys' linen woven trousers.

Sec. . Men's or boys' linen woven shorts.

Sec. . Martial arts uniforms.

Sec. . Women's dresses of woven viscose.

Sec. . Girls' woven cotton corduroy trousers.

Sec. . Women's woven waffle shirts.

Sec. . Babies' woven artificial fiber shirts and blouses.

Sec. . Babies' artificial fiber woven jumpsuits, coveralls, dresses, skirts, skirtalls, or clothing accessories.

Sec. . Women's or girls' linen woven blouses, shirts and shirt-blouses, and sleeveless tank styles.

Sec. . Women's or girls' linen woven washsuits, sunsuits, or one-piece playsuits.

Sec. . Women's or girls' linen woven coveralls or jumpsuits.

Sec. . Women's shawls and similar goods, 100 percent silk.

Sec. . Winter cycling gloves.

Sec. . Mattress protectors with toppers.

Sec. . Printed mattress protectors.

Sec. . Lock pocket tents.

Sec. . Dark room tents.

Sec. . Air tube chambered tents.

Sec. . Bi-component microfiber tube mop refills.

Sec. . Microfiber duster refills.

Sec. . RFID mop pads.

Sec. . Microfiber cleaning cloths.

Sec. . Microfiber mop pads.

Sec. . Golf bag bodies with rain hoods and straps.

Sec. . Pillow shells, constructed with gussets.

Sec. . Golf bag body flats.

Sec. . Bathtub elbow rests.

Sec. . Door swings.

Sec. . Under bed restraints.

Sec. . Flat golf bag body components, without bottoms.

Sec. . Bath kneeler.

Sec. . Pillow shells, with oval jacquard weave.

Sec. . Two-piece camera mount kits.

Sec. . Sleeve covers.

Sec. . Sports footwear for men, valued over $20 per pair.

Sec. . Sports footwear for women, valued over $20 per pair.

Sec. . Men's cycling shoes valued over $18 per pair.

Sec. . Women's cycling shoes valued over $16 per pair.

Sec. . Men's golf shoes with outers and uppers of rubber or plastics, valued over $20 per pair.

Sec. . Golf shoes other than for men, with outers and uppers of rubber or plastics, valued over $20 per pair.

Sec. . Winter cycling boots for men.

Sec. . Winter cycling boots for women.

Sec. . Men's protective active footwear with waterproof soles, valued over $26 per pair, covering the ankle.

Sec. . Women's protective active footwear with waterproof soles, valued over $27 per pair, 15.35'25.4 cm in height.

Sec. . Children's protective active footwear with waterproof soles, valued over $18 per pair.

Sec. . Men's protective active footwear with waterproof soles, valued over $27 per pair, 15.35'25.4 cm in height.

Sec. . Children's footwear valued over $15 per pair.

Sec. . Women's protective active footwear, valued over $25 per pair, 15.35'25.4 cm in height.

Sec. . Women's rubber or plastic footwear covering the ankle with fox-like banding.

Sec. . Cheer shoes covering the ankle.

Sec. . Footwear for women, with 90 percent of the external surface of rubber or plastic, valued $15'$22 per pair.

Sec. . Sideline cheer shoes.

Sec. . Men's athletic footwear, valued under $9 per pair.

Sec. . Athletic footwear for women, valued not over $9 per pair.

Sec. . Athletic footwear for children, valued not over $8 per pair.

Sec. . Men's golf shoes, with outer soles and uppers of rubber or plastics, not covering the ankle, valued $15 per pair or over.

Sec. . Golf shoes other than for men, with outer soles and uppers of rubber or plastics, not covering the ankle, valued $15 per pair or over.

Sec. . Men's rubber/plastic footwear, valued not over $5 per pair.

Sec. . Women's rubber/plastic footwear, valued not over $6 per pair.

Sec. . Children's athletic shoes with glitter uppers.

Sec. . Cheer shoes with sole less than 12 mm.

Sec. . Men's golf shoes with outers and uppers of rubber or plastics, valued over $19 per pair.

Sec. . Golf shoes other than for men, outer soles and uppers of rubber or plastics, valued over $19 per pair.

Sec. . Men's golf shoes, outer soles of rubber, plastics, leather or composition leather and uppers of leather (except pigskin uppers).

Sec. . Men's oxford work footwear with metal safety toe and internal metatarsal protection.

Sec. . Oxford-style leather footwear with metal safety toe and static dissipating protection.

Sec. . Women's leather footwear, lined with pigskin with zipper, valued $47'$60 per pair.

Sec. . Women's leather footwear, lined with pigskin, valued $31'$40 per pair.

Sec. . Women's slip-on cow/calf hair footwear, valued $50'$60 per pair.

Sec. . Women's leather footwear lined with sheepskin.

Sec. . Women's leather slip-on footwear lined with sheep leather.

Sec. . Women's leather slip-on footwear lined with pigskin.

Sec. . Women's leather footwear, lined with pigskin, valued $21'$27 per pair.

Sec. . Men's mid-cut work footwear with composite safety toe and waterproof leather uppers.

Sec. . Men's leather upper footwear, San Crispino construction, valued over $32 per pair.

Sec. . Men's leather upper athletic footwear.

Sec. . Women's footwear with leather uppers, lined with pigskin, valued $37'$43 per pair.

Sec. . Women's footwear with leather uppers, lined with pigskin, valued $88'$102 per pair.

Sec. . Women's footwear with leather uppers, lined with pigskin, valued $24'$32 per pair.

Sec. . Women's footwear with leather uppers, lined with pigskin, valued $57'$62 per pair.

Sec. . Women's footwear with leather uppers, strap with closed toe and open heel.

Sec. . Open toe women's footwear, valued over $23 but not over $27 per pair.

Sec. . Slip-on footwear for women, valued over $24 but not over $27 per pair.

Sec. . Women's footwear with leather uppers, lined with pigskin, closed toe or heel with functional zippers on sides.

Sec. . Women's footwear with leather uppers, lined with pigskin, closed toe or heel with zipper closure, height of 43'48 cm.

Sec. . Women's footwear with leather uppers, lined with pigskin covering the knee.

Sec. . Women's footwear with leather uppers, lined with pigskin, closed toe or heel with zipper closure, height of 48'52 cm.

Sec. . Women's footwear with leather uppers, open toe with strap and buckle, valued $14'$25 per pair.

Sec. . Women's slip-on footwear with bovine leather uppers.

Sec. . Women's footwear with leather uppers, lined with pigskin with adjustable laces.

Sec. . Men's waterproof leather footwear, valued $27 per pair or higher.

Sec. . Men's or boys' golf shoes, valued $30 per pair or higher.

Sec. . Competitive cheer shoes with leather uppers.

Sec. . Children's waterproof leather footwear, not covering the ankle, valued $14 per pair or higher.

Sec. . Women's footwear with leather uppers, open toe with strap and buckle, valued $12.50'$28 per pair.

Sec. . Women's footwear with leather uppers, closed toe with strap and buckle.

Sec. . Women's footwear with leather uppers, with strap and buckle, valued $27'$40 per pair.

Sec. . Women's footwear with leather uppers, with strap and buckle, valued $12.70'$18.70 per pair.

Sec. . Children's leather upper athletic footwear, valued not over $9 per pair.

Sec. . Men's athletic type footwear with uppers of textile materials of vegetable fibers and outer soles of rubber or plastic with textile flocking.

Sec. . Athletic footwear for men, with a bellows tongue, valued over $6.50 but not over $12 per pair.

Sec. . Athletic footwear for women, with a bellows tongue, valued over $6.50 but not over $12 per pair.

Sec. . Athletic footwear for children, bellows tongue, valued over $6.50 but not over $12 per pair.

Sec. . Athletic footwear for men, valued over $6.50 but not over $9 per pair.

Sec. . Athletic footwear for children, valued over $6.50 but not over $9 per pair.

Sec. . Men's waterproof footwear, valued over $15 per pair, covering the ankle.

Sec. . Men's waterproof footwear, valued over $13 per pair, not covering the ankle.

Sec. . Women's waterproof footwear, valued over $15 per pair, covering the ankle.

Sec. . Women's waterproof footwear, valued over $13 per pair, not covering the ankle.

Sec. . Cheer shoes with uppers of textile materials.

Sec. . Men's golf shoes, uppers of textile materials.

Sec. . Golf shoes other than for men, uppers of textile materials.

Sec. . Women's footwear with textile uppers and 50 percent or more of the surface area of which is leather.

Sec. . Shoe and boot covers.

Sec. . Women's footwear with textile uppers, open toes or heels, valued $15'$30 per pair.

Sec. . Men's textile upper footwear, with open toes or open heels, valued not over $12 per pair.

Sec. . Women's textile upper footwear, with open toes or open heels, valued not over $12 per pair.

Sec. . Children's textile upper footwear, with open toes or open heels, valued not over $12 per pair.

Sec. . Oxford footwear with textile upper and composite toe, valued at $12'$20 per pair.

Sec. . Oxford-style footwear for men or women with textile uppers, with an alloy safety toecap and static dissipating protection.

Sec. . Oxford-style work footwear with steel safety toe and static dissipating protection.

Sec. . Women's footwear, covering the ankle but not the knee, valued over $24 per pair.

Sec. . Men's textile upper footwear, not covering the ankle, valued over $24 per pair.

Sec. . Oxford footwear with textile uppers and composite toe, valued over $20 per pair.

Sec. . Men's mid-cut footwear with a textile upper and a protective toe cap.

Sec. . Women's footwear with leather soles and textile uppers, open toes or heels, valued $12'$24 per pair.

Sec. . Footwear for women valued over $20 but not over $24 per pair.

Sec. . Women's footwear with leather soles and textile uppers, valued $15'$20 per pair.

Sec. . Women's footwear with leather soles and textile uppers, valued $20'$25 per pair.

Sec. . Women's footwear with cork soles and textile uppers.

Sec. . Men's footwear with felt soles, not covering the ankle, valued $20 per pair or higher.

Sec. . Women's and girls' footwear with cork uppers, valued less than $25 per pair.

Sec. . Women's footwear with cow/calf hair uppers, valued $35'$40 per pair, covering the ankle.

Sec. . Women's footwear with cow/calf hair uppers, valued $35'$40 per pair, not covering the ankle.

Sec. . Women's footwear with cow/calf hair uppers, valued $19'$25 per pair.

Sec. . Women's footwear with cow/calf hair uppers, valued $50'$55 per pair.

Sec. . Women's footwear, leather soles and rubber/plastic uppers, valued $16'$18 per pair.

Sec. . Women's footwear with cow/calf hair uppers, valued $19'$34 per pair.

Sec. . Footwear for women, valued over $50 but not over $60 per pair.

Sec. . Calf hair upper footwear.

Sec. . Gaiters of man-made fibers.

Sec. . Hats of vegetable fibers.

Sec. . Hairnets.

Sec. . Cotton knit hats, valued $8 or less.

Sec. . Babies' woven cotton hats.

Sec. . Hats of man-made fiber, valued $5'$25.

Sec. . Waterproof and insulated hats with ear flaps, valued over $15.

Sec. . Fishing wading staffs.

Sec. . Plastic plants for aquariums, not glued or bound.

Sec. . Natural stone ledger tile of sandstone.

Sec. . Marble mosaic and pebble tiles.

Sec. . Natural stone limestone tiles.

Sec. . Natural stone marble tiles.

Sec. . Waterjet natural stone mosaic tile.

Sec. . Marble entertaining and serveware.

Sec. . Articles of marble for kitchen and dining room.

Sec. . Natural stone ledger tiles of travertine.

Sec. . Travertine decorative tile.

Sec. . Limestone decorative tiles.

Sec. . Blank, embossed, and printed stoneware coaster disks and trivets.

Sec. . Rolled green glass sheets.

Sec. . Framed rear-view mirrors.

Sec. . Wall mirrors, unframed.

Sec. . Wall mirrors, framed.

Sec. . Stemware (crystalline) drinking glasses valued over $0.30 but not over $3 each, other than those presented in sets.

Sec. . Double-walled insulated glass tumblers.

Sec. . Diamond-shaped stemmed wine glasses.

Sec. . Twisted-center stemless wine glass.

Sec. . Crystalline drinking glasses, without stems, not in sets.

Sec. . Double-walled insulated glass bowls.

Sec. . Leaf-shaped glass decanters.

Sec. . Set of four appetizer plates made of glass with steel caddy holder, valued at $2 each.

Sec. . Spice rack with glass jars and wooden lids valued not over $3 each.

Sec. . Glass lens blanks for infrared applications.

Sec. . Hair accessories of glass beads, imitation pearls, and imitation stones, valued less than $7.

Sec. . Filter bags with acid-resistant coating, of woven fiberglass laminated to ePTFE, weighing at least 325 g/m2 but not over 350 g/m2.

Sec. . Fiberglass replacement wicks for outdoor garden torch.

Sec. . Filter bags of woven fiberglass fabric laminated to an ePTFE, with a polytetrafluoroethylene coated backing, not acid resistant, weighing at least 721 g/m2 but not over 771 g/m2.

Sec. . Silver catalyst.

Sec. . Silver round blanks.

Sec. . Ferroboron alloy.

Sec. . Cast iron nonmalleable threaded main body combo castings for residential fuel oil tanks.

Sec. . Cast iron nonmalleable threaded vent caps for residential fuel oil tanks.

Sec. . Cast iron nonmalleable threaded bushings for residential fuel oil tanks.

Sec. . Cast iron nonmalleable threaded tank adapters for residential fuel oil tanks.

Sec. . Cast iron nonmalleable threaded fill alarm main body for residential fuel oil tanks.

Sec. . Cast iron nonmalleable threaded fill box caps for residential fuel oil tanks.

Sec. . Cast iron nonmalleable threaded leg flanges for residential fuel oil tanks.

Sec. . Portable gas cooking stoves.

Sec. . Portable outdoor cookers.

Sec. . Self-anchored beverage containers.

Sec. . Stainless steel handmade kitchen sinks.

Sec. . Loose frame baskets.

Sec. . Two-story fire escape ladders.

Sec. . Three-story fire escape ladders.

Sec. . Work support stands of steel.

Sec. . Locking fixtures of iron or steel.

Sec. . Stainless steel handle-and-stand accessories.

Sec. . Circular and S-shaped stainless steel carabiners.

Sec. . Pieces of refined unwrought copper cathode 99. percent pure.

Sec. . Ultra-thin and wide-width aluminum foil.

Sec. . Etched capacitor aluminum foil of a thickness 0.018'0.126 mm.

Sec. . Stove top coffee makers.

Sec. . Aluminum shower caddies.

Sec. . Step stools of aluminum.

Sec. . Aluminum ladders.

Sec. . Circular and S-shaped aluminum carabiners.

Sec. . Stationary sprinklers of zinc.

Sec. . Tungsten waste and scrap.

Sec. . Cobalt alloys.

Sec. . Certain gallium (Ga).

Sec. . Niobium (columbium) rings no thicker than 20 mm.

Sec. . Tungsten secondary raw material.

Sec. . Gear-driven bolt cutters and pipe cutters.

Sec. . Rotary cutters.

Sec. . Food graters.

Sec. . Hand tools for applying plastic clip fasteners to garments.

Sec. . Steel workstations with vises adjustable by foot pedal.

Sec. . Fixed carbide cutter and roller cone drill bits.

Sec. . Rotary food graters.

Sec. . Coffee presses.

Sec. . Vacuum insulated coffee servers with a brew-through lid.

Sec. . Vacuum insulated coffee servers with no lid.

Sec. . Vacuum insulated coffee servers with fitted hinged lid.

Sec. . Commercial vacuum insulated coffee servers with sight gauge.

Sec. . Commercial vacuum insulated coffee servers with plastic base.

Sec. . Commercial vacuum insulated coffee servers with plastic base and stand.

Sec. . Craft knives with fixed pen-like or retractable blades.

Sec. . Craft knives.

Sec. . Blades for craft knives with non-fixed blades.

Sec. . Ergonomic pinking shears.

Sec. . Spring-action scissors.

Sec. . Electronic locks for lockers.

Sec. . Luggage locks of base metal, packaged for retail sale.

Sec. . Key-operated door handles, push-pull-rotate.

Sec. . Vent mounted magnetic mobile holder for automobiles.

Sec. . Dash mounted magnetic mobile holder for automobiles.

Sec. . Windshield mounted magnetic mobile holder for automobiles.

Sec. . Steel latches with plastic plungers.

Sec. . Non-key-operated door handles.

Sec. . Curtain rings.

Sec. . Brackets.

Sec. . Curtain rods.

Sec. . Curtain rod hardware.

Sec. . Curtain tiebacks.

Sec. . Curtain rod finials.

Sec. . Curved shower rods.

Sec. . Shower hooks and rings.

Sec. . Straight shower rods.

Sec. . Steel window rods.

Sec. . Antitheft steel cases with digital locks.

Sec. . Stainless steel hose kits.

Sec. . Stainless steel hoses.

Sec. . Wrist watch strap buckles not over 18 mm.

Sec. . Wrist watch strap buckles over 18 mm.

Sec. . Used cylinder heads.

Sec. . Cylinder heads used solely or principally with certain engines.

Sec. . Engine blocks.

Sec. . Swirler assemblies for turbines.

Sec. . Barrels for fuel mixing.

Sec. . Injector assemblies for certain turbines.

Sec. . Stem assemblies for certain turbines.

Sec. . Tip assemblies for non-gas turbines.

Sec. . High pressure fuel pumps.

Sec. . Dry scroll vacuum pumps 364x333x485 mm.

Sec. . Dry scroll vacuum pumps 297x260x420 mm.

Sec. . Dry scroll vacuum pumps 254x260x420 mm.

Sec. . Dry scroll vacuum pumps 181x140x358 mm.

Sec. . Turbomolecular vacuum pumps.

Sec. . Rotary vane vacuum pumps valued over $500 each.

Sec. . Vacuum diffusion pumps valued over $900 each.

Sec. . Hand- or foot-operated air pumps.

Sec. . Roof vent fans.

Sec. . 12-Amp corded electric leaf blowers.

Sec. . Cordless battery powered leaf blowers not exceeding 20 volts.

Sec. . Cordless battery powered leaf blowers between 20 and 60 V.

Sec. . Fan assemblies for cab climate systems.

Sec. . Aquarium air pumps.

Sec. . Heat pumps for residential use.

Sec. . Heat pumps (outdoor units) for split air conditioner systems.

Sec. . High-wall indoor units.

Sec. . Single-zone outdoor units.

Sec. . Mini heat pumps for split air conditioner systems.

Sec. . Multi-zone outdoor unit ductless systems.

Sec. . Indoor units of split air conditioner systems.

Sec. . Ductless BTU heat pumps, single zone inverter.

Sec. . Single-phase heat pump.

Sec. . Steel vacuum pitchers with plastic hinged lid.

Sec. . Oil filters.

Sec. . Battery powered nasal irrigators.

Sec. . Struts to absorb vibration.

Sec. . Table saws (25.4 cm.), operable corded and cordless.

Sec. . Sliding miter saws (25.4 cm) with laser, corded and cordless.

Sec. . Electromechanical rotary hammers, corded and cordless.

Sec. . Electromechanical hammer impact drivers, corded and cordless.

Sec. . Rotary hammer drill tools with self-contained electric motor.

Sec. . Drill driver tools with self-contained electric motor.

Sec. . Extruders.

Sec. . Three-dimensional drawing pens.

Sec. . Professional grade three-dimensional drawing pens.

Sec. . Electric multi-functional blower vacuums.

Sec. . Autosamplers (multisamplers) for liquid chromatographs.

Sec. . Autosamplers (vialsamplers) for liquid chromatographs.

Sec. . Hydraulic hammer assembly.

Sec. . Segmented bladder-operated molds, with more than 25-inch rim diameter.

Sec. . Used valves for directional control.

Sec. . Keg spears with pressure release valves.

Sec. . Multiport distribution controllers.

Sec. . Subsea modular trees.

Sec. . Flow selector unit-multi-port 6-branch engine crankshafts.

Sec. . Engine crankshafts.

Sec. . Turbocharger journal bearings.

Sec. . Mid-range bearing housings.

Sec. . Heavy duty bearing housings.

Sec. . Fixed ration gear boxes.

Sec. . Track drive gear boxes.

Sec. . Swing bearing assembly.

Sec. . Gears for use in machinery or within engines.

Sec. . 14Y stepper motors.

Sec. . Air door actuators.

Sec. . Servo motors.

Sec. . DC brushed rhombic winding NdFeb magnet motors, with output under 18.65 W.

Sec. . DC brushed rhombic winding NdFeB magnet motors.

Sec. . DC brushed rhombic winding AlNiCo magnet motors, with output under 18.65 W.

Sec. . DC brushless rhombic winding NdFeB magnet motors, with output under 18.65 W.

Sec. . DC brushed rhombic winding NdFeB magnet motors, with output over 18.65 but not over 37.5 W.

Sec. . DC brushed rhombic winding AlNiCo magnet motors, with output over 18.65 W but not over 37.5 W.

Sec. . DC brushless slotless rhombic winding NdFeB magnet motors output over 18.65 W but not over 37.5 W.

Sec. . DC brushed rhombic winding NdFeB magnet motors output over 37.5 W but not over 74.6 W.

Sec. . DC brushless slotless rhombic winding NdFeB magnet motors output over 37.5 W but not over 74.6 W.

Sec. . Motors.

Sec. . DC motors of an output exceeding 74.6 W but not exceeding 735 W.

Sec. . DC motors, of an output exceeding 74.6 W but not exceeding 735 W.

Sec. . DC brushed rhombic winding NdFeB magnet motors output over 74.6 W but not over 735 W.

Sec. . DC brushless slotless rhombic winding NdFeB magnet motors output over 74.6 W but not over 735 W.

Sec. . DC motors of an output exceeding 750 W but not exceeding 14.92 kW.

Sec. . DC electric motor for non-aircraft gas turbines.

Sec. . AC alternators.

Sec. . AC alternators with copper windings.

Sec. . Wound stators and rotor assemblies.

Sec. . Rotors.

Sec. . Stators for washing machines, with a 27-tooth design.

Sec. . Stators for washing machines, with an 18-tooth design.

Sec. . Rotors for washing machines, with a height of 60.8 mm.

Sec. . Rotors for washing machines, with a height of 49 mm.

Sec. . 6 V lead-acid storage batteries.

Sec. . 12 V lead-acid storage batteries, used for the auxiliary source of power.

Sec. . Lead-acid storage batteries, used for wheelchairs.

Sec. . 12 V lead-acid storage batteries, rated at less than 15 ampere-hours.

Sec. . 12 V lead-acid storage batteries, rated at 15 ampere-hours or more.

Sec. . Cell box assemblies, weighing 15 kg or more but not over 18 kg.

Sec. . Cell box assemblies, weighing 30 kg or more but not over 36 kg.

Sec. . Cell box assemblies, weighing 36 kg or more but not over 49 kg.

Sec. . Cell box assemblies NX.

Sec. . Food processors with a capacity greater than 2.9 liters but not exceeding 3.1 liters.

Sec. . Food processors with a capacity greater than 1.6 liters but not exceeding 2.2 liters.

Sec. . Cordless hand blenders.

Sec. . Cordless hand mixers.

Sec. . Corded hand blenders.

Sec. . Burr coffee grinders.

Sec. . Electric food processors with bowl scraper.

Sec. . Electric food processors with snap-locking lid.

Sec. . Electric juice extractors.

Sec. . Electric drink mixers.

Sec. . Spiralizing food processors with a capacity equal to or greater than 2.36 liters but not exceeding 2.64 liters.

Sec. . Spiralizing food processors with a capacity equal to or greater than 2.83 liters but not exceeding 3.07 liters.

Sec. . Dicing food processors.

Sec. . Compact food processor with smoothie function.

Sec. . Juice extractors.

Sec. . Integrated baby food making systems.

Sec. . Electric juice mixers and grinders.

Sec. . Ultrasonic humidifiers.

Sec. . Automatic litterboxes, valued no more than $100.

Sec. . Electric toothbrushes.

Sec. . Ultrasonic cool/warm mist humidifiers with aromatherapy.

Sec. . 2-in-1 can opener.

Sec. . Food spiralizing devices.

Sec. . Ceramic bowls.

Sec. . Food grinders for certain electromechanical stand food mixers.

Sec. . Pasta press extruders for certain stand food mixers.

Sec. . Stainless steel bowls for certain electromechanical stand food mixers, with capacity greater than 4.2 liters but not exceeding 4.8 liters.

Sec. . Stainless steel bowls for certain electromechanical stand food mixers, with capacity greater than 2.8 liters but not exceeding 3.4 liters.

Sec. . Stainless steel bowls for certain electromechanical stand food mixers, with capacity greater than 5.6 liters but not exceeding 8.6 liters.

Sec. . Pasta rollers and cutters for stand food mixers.

Sec. . Glass bowls for certain electromechanical stand food mixers.

Sec. . Body trimmers for detailed hair trimming.

Sec. . Hair clipper sets.

Sec. . Rechargeable trimmers for trimming human hair.

Sec. . PCB assemblies for clippers and trimmers.

Sec. . LED bicycle wheel spoke lights.

Sec. . Bicycle rear lights.

Sec. . Portable electric lamps.

Sec. . Space heaters.

Sec. . Microwave ovens with capacity not exceeding 22.5 liters.

Sec. . Microwave ovens with capacity exceeding 22.5 liters but not exceeding 31 liters.

Sec. . Low-profile microwave ovens with electronic opening mechanism and integral range hood.

Sec. . Low-profile microwave ovens with push button opening mechanism and integral range hood.

Sec. . Low-profile microwave ovens with electronic opening mechanism and without a range hood.

Sec. . Searing grills.

Sec. . Automatic drip coffee makers.

Sec. . Espresso machines.

Sec. . Coffee makers with dishwasher safe removable parts.

Sec. . Single-service coffee makers with milk frothers.

Sec. . Electric coffee makers with dual dispensers.

Sec. . Electric coffee makers for brewing capsules.

Sec. . Automatic or manual pour over coffee makers.

Sec. . Removable reservoir coffeemakers.

Sec. . Single serve coffee makers.

Sec. . 2-way coffee makers with a 12-cup carafe and a pod brewer.

Sec. . Rapid cold brew and hot coffee makers.

Sec. . Electric kettles.

Sec. . Electric toasters with even-toast feature.

Sec. . Electric toasters with 6.5 inch slots.

Sec. . Electric toasters with 37 mm wide slots, with an under-base cord wrap.

Sec. . 2- and 4- slot toasters, not having a button to keep toaster contents warm after toasting.

Sec. . 2-slot toasters, with a button to keep toaster content warm after toasting.

Sec. . Electric toasters with double-slice slots.

Sec. . Electric toasters with 37 mm wide slots, with a retractable cord.

Sec. . Electric pressure cookers rated more than 800 W but not more than 1,000 W, with a capacity of not less than 5 liters.

Sec. . Electric pressure cookers rated more than 1,200 W but not more than 1,400 W, with a capacity of less than 5 liters.

Sec. . Electric pressure cookers rated more than 1,000 W but not more than 1,200 W, with a capacity of less than 5 liters.

Sec. . Contoured heating pads.

Sec. . Slow cookers with non-stick ceramic coated stoneware.

Sec. . Heating pads.

Sec. . Programmable slow cookers with digital display.

Sec. . 8-Quart electric slow cookers.

Sec. . Programmable slow cookers.

Sec. . Electric slow cookers with locking lid.

Sec. . Double flip waffle makers with removable grids.

Sec. . Ice cream waffle cone and bowl makers.

Sec. . Electric breakfast sandwich makers.

Sec. . Pressure cookers.

Sec. . 10-quart programmable slow cookers.

Sec. . Polished stainless steel 1.5-quart tea kettles.

Sec. . Egg bite makers.

Sec. . Vacuum steel insulated coffee carafes, of a kind used with deep ultraviolet lithography machines.

Sec. . Vacuum steel insulated carafes for household coffee machines, of a kind used with deep ultraviolet lithography machines.

Sec. . Vacuum steel bodies with inner and outer steel layers.

Sec. . Lamp-holder housings of plastic.

Sec. . 660 W, 125 V, lamp-holder with two 15 amp outlets.

Sec. . Combination duplex receptacle/outlet and USB charger, 15'20 amp, 125 V.

Sec. . Range and dryer receptacles.

Sec. . Residential grade receptacles.

Sec. . Residential and commercial USB receptacles.

Sec. . Power strips.

Sec. . Surge protectors.

Sec. . Programmable controllers for architectural lighting.

Sec. . Electronic modular control panels for generators.

Sec. . Power distribution modules and programmable controllers.

Sec. . Glass capacitive touchscreen assemblies with LCD.

Sec. . Lamps containing deuterium gas without radio-frequency identification (RFID).

Sec. . Lamps containing deuterium gas with radio-frequency identification (RFID).

Sec. . Fiber channel coaxial cables of silver-plated copper conductors and expanded ePTFE dielectrics.

Sec. . Insulated coaxial cables, of a kind used with deep ultraviolet lithography machines.

Sec. . Coaxial cables insulated with ePTFE, vapor sealed, of a kind used with deep ultraviolet lithography machines.

Sec. . Coaxial cables insulated with ePTFE, non-vapor sealed, of a kind used with deep ultraviolet lithography machines.

Sec. . Low speed automotive ethernet USB harnesses.

Sec. . High speed autolink cable USB harnesses.

Sec. . Insulated electric conductors, of a kind used with extreme ultraviolet lithography machines.

Sec. . Insulated electric conductors, of a kind used with deep ultraviolet lithography machines.

Sec. . Insulated electric conductors, of a kind used with optical instruments.

Sec. . Rings, blocks, and other insulating fittings of quartz.

Sec. . Front tire splash guards for vehicles.

Sec. . Rear tire splash guards for vehicles.

Sec. . Automatic gear boxes.

Sec. . Suspension systems (struts) for off-highway trucks.

Sec. . Suspension system stabilizer bars.

Sec. . Tie rod assemblies.

Sec. . Used axle housings.

Sec. . Used parts for power trains.

Sec. . Front windshield covers.

Sec. . Expansion chambers.

Sec. . Bicycle racks for car roofs.

Sec. . High pressure fuel injector rails.

Sec. . Stand-up bicycles, having both wheels exceeding 63.5 cm in diameter.

Sec. . Elliptical cycles, with wheels not exceeding 63.5 cm in diameter.

Sec. . Bicycle frames, other than of steel, valued $600 or less.

Sec. . Internal gear bicycle hubs, other than two or three speeds.

Sec. . Bicycle pedals other than clipless pedals.

Sec. . Clipless bicycle pedals and parts thereof.

Sec. . Carbon fiber bicycle seatposts.

Sec. . Bicycle handlebar tape, other than silicon or leather tape.

Sec. . Trailer cycles.

Sec. . Dropper seatposts.

Sec. . Bicycle fenders.

Sec. . Bicycle handlebars.

Sec. . Multi-functional steel carts.

Sec. . Non-mechanically propelled industrial hand truck.

Sec. . Moving dollies.

Sec. . Paragliders, paraglider wings and paraglider harnesses.

Sec. . Sailing catamarans and power catamarans.

Sec. . Projection lenses.

Sec. . Mounted optical lenses.

Sec. . Objective lenses for broadcast cameras.

Sec. . Objective lenses for cinema cameras.

Sec. . Magnifying spectacles.

Sec. . LCD television panel assemblies, with a video display measuring over 175.26 cm.

Sec. . LCD television panel assemblies, with a video display measuring over 149.86 cm but not over 175.26 cm.

Sec. . LCD television panel assemblies, with a video display measuring over 139.7 cm but not over 149.86 cm.

Sec. . LCD television panel assemblies, with a video display measuring over 137.16 cm but not over 139.7 cm.

Sec. . Housings designed for infrared lenses.

Sec. . Electronic temperature indicators, weighing 14.2 g.

Sec. . Electronic temperature indicators, weighing 64.4 g.

Sec. . Electronic temperature indicators, weighing 430 g.

Sec. . Global cargo trackers, weighing 660 g.

Sec. . Temperature data monitors, weighing 115 g.

Sec. . Temperature data monitors, weighing 138.9 g.

Sec. . Temperature data monitors, weighing 133.2 g.

Sec. . Parts and accessories of bicycle speedometers.

Sec. . Wired remote controllers.

Sec. . Analog/digital wrist watches.

Sec. . Mechanical wrist watches.

Sec. . Mechanical wrist watches with leather or other band.

Sec. . Analog pocket watches.

Sec. . Projection alarm clocks, non-atomic.

Sec. . Projection atomic alarm clocks.

Sec. . Analog wall clocks without thermometer, hygrometer, or barometer gauges.

Sec. . Analog clocks with thermometer and hygrometer.

Sec. . Atomic analog wall clocks.

Sec. . Atomic digital clocks.

Sec. . Analog kitchen timers.

Sec. . Wrist watch movements having over one jewel and less than 7 jewels.

Sec. . Watch movements having over 7 jewels and under 17 jewels.

Sec. . Watch cases or bodies over 41 mm in diameter.

Sec. . Watch cases or bodies not over 41 mm in diameter.

Sec. . Watch case bezels, backs, and centers.

Sec. . Watch case parts.

Sec. . Stainless steel watch bracelets.

Sec. . Watch dials.

Sec. . Watch crowns.

Sec. . Watch hands.

Sec. . Acoustic guitars.

Sec. . Console digital pianos.

Sec. . Grand digital pianos.

Sec. . Electronic 61-key keyboards.

Sec. . Electric guitars and acoustic/electric guitars.

Sec. . Memory foam travel pillows.

Sec. . Lighting for wall installation.

Sec. . Decorative bathroom fan assemblies (lighting fixtures) assemblies.

Sec. . Metal household floor lamps.

Sec. . Solar powered pathway lights, each measuring between 36.8 cm and 42 cm in height.

Sec. . Solar powered pathway lights, each measuring between 45 cm and 48 cm in height.

Sec. . Exterior exit viewing lights, dual beam.

Sec. . LED flameless candles.

Sec. . Aquarium LED light strands.

Sec. . LED light modules for bathroom fans/lights.

Sec. . Aquarium LED light sticks.

Sec. . Aquarium LED light strips.

Sec. . Decorative votive candle holders.

Sec. . Candle jar shades.

Sec. . Non-electrical lighting.

Sec. . Outdoor garden or patio torches of bamboo construction.

Sec. . Outdoor garden or patio torches of non-bamboo construction.

Sec. . Indoor oil lamps with base of glass or metal.

Sec. . Outdoor garden torches for tabletop use.

Sec. . Glass lens arrays for spotlights.

Sec. . Lamp shades.

Sec. . Galvanized steel LED downlight housing frames.

Sec. . Aluminum cylinders for LED lighting fixtures.

Sec. . Galvanized steel brackets and plates for LED lighting fixtures.

Sec. . Aluminum LED downlight reflectors.

Sec. . Outdoor garden torch replacement canisters.

Sec. . Iris subassemblies for moving lights.

Sec. . Zoom modules for automated moving lights.

Sec. . Golf club heads for fairway woods.

Sec. . Golf club shafts for putters.

Sec. . Steel golf club shafts, other than for putters.

Sec. . Golf club shaft assemblies.

Sec. . Graphite driver golf club shafts, extra stiff flex.

Sec. . Graphite hybrid golf club shafts, extra stiff flex.

Sec. . Graphite irons golf club shafts, extra stiff flex.

Sec. . Graphite driver golf club shafts, regular, senior, adult, or ladies flex.

Sec. . Graphite golf club driver shafts, stiff flex.

Sec. . Graphite hybrid golf club shafts, regular, senior, adult, or ladies flex.

Sec. . Graphite hybrid golf club shafts, stiff flex.

Sec. . Graphite irons golf club shafts, regular, senior, adult, or ladies flex.

Sec. . Graphite irons golf club shafts, stiff flex.

Sec. . Pickleball paddles.

Sec. . Pickleballs.

Sec. . Exercise cycles.

Sec. . Stationary trainers.

Sec. . Multimodality fitness equipment, without integrated contact grip heart rate monitor.

Sec. . Multimodality fitness equipment with integrated power sensor to measure the user's upper body power input.

Sec. . Parts and accessories for treadmills.

Sec. . Parts and accessories for ellipticals.

Sec. . Parts and accessories for stationary exercise cycles.

Sec. . Parts and accessories for weight training equipment.

Sec. . Parts and accessories for certain exercise equipment machines.

Sec. . Lateral elliptical machines.

Sec. . Adjustable-weight kettlebells.

Sec. . Adjustable-weight barbell.

Sec. . Exercise cycles with dual-position handgrips.

Sec. . Exercise cycles with single handgrips.

Sec. . Upright exercise cycles.

Sec. . Recumbent exercise cycles with touchscreen consoles.

Sec. . Leaning exercise cycles.

Sec. . Rod gyms, with vertical bench.

Sec. . Rod and resistance gyms, with flat benches.

Sec. . Foldable treadmills, with LCD consoles with control keypads.

Sec. . Foldable treadmills, with touchscreen consoles measuring 44.5 cm or less.

Sec. . Indoor cycling machines with wireless data touchscreen displays.

Sec. . Indoor cycling machines with LCD consoles and two water bottle holders.

Sec. . Indoor cycling machines with LCD consoles and single water bottle holder.

Sec. . Recumbent elliptical machines.

Sec. . Fitness equipment combining the functions of an elliptical and a stair stepper, weight over 90 kgs.

Sec. . Foldable treadmills with touchscreen console greater than 44.4 cm.

Sec. . Interactive indoor cycling exercise cycles.

Sec. . Multimodality fitness equipment, with integrated contact grip heart rate monitors.

Sec. . Fishing reels valued not over $2.70 each, pre-spooled, with rod and fishing line.

Sec. . Fishing reels valued not over $2.70 each.

Sec. . Hard artificial crankbaits.

Sec. . Collapsible big game decoys.

Sec. . Vacuum steel hinged lid pitchers, not exceeding 1 liter.

Sec. . Vacuum insulated drinkware having a capacity exceeding 1 liter but not exceeding 2 liters.

Sec. . Vacuum insulated drinkware having a capacity exceeding 2 liters but not exceeding 4 liters.

Sec. . Vacuum glass lined steel coffee servers over 2 liters.

Sec. . Vacuum glass lined steel coffee servers over 2 liters with lever dispensing.

PART II'Existing duty suspensions and reductions

Sec. . Extension of certain existing duty suspensions and reductions and other modifications.

PART III'Effective date

Sec. . Effective date.

Subtitle C'Reauthorization of American Manufacturing Competitiveness Act of

Sec. . Reauthorization of American Manufacturing Competitiveness Act of .

TITLE V'Authorization of Appropriations

Sec. . Authorization of additional appropriations.

TITLE VI'Customs user fees

Sec. . Extension of customs user fees.

I

New Duty Suspensions and Reductions

.

Shelled pine nuts

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.01 Pine nuts, shelled (provided for in subheading .90.98) FreeNo changeNo changeOn or before 12/31/

.

.

Licorice extract

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.02 Vegetable saps and extracts of licorice (provided for in subheading .12.00) 0.7%No changeNo changeOn or before 12/31/

.

.

Refined Carrageenan

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.03 N-{[2-({4-[(3-Methylbutanoyl)amino]phenyl}carbonyl) hydrazino]carbonothioyl}-3-nitrobenzamide (Carrageenan) (CAS No. '07'1) (provided for in subheading .39.00) 2.4%No changeNo changeOn or before 12/31/

.

.

Irish dairy chocolate crumb

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.04 Chocolate crumb manufactured with fluid milk from Irish cows (provided for in subheading .20.24) 2.9%No changeNo changeOn or before 12/31/

.

.

Pepperoncini, preserved in vinegar

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.05 Pepperoncini, prepared or preserved by vinegar or acetic acid (provided for in subheading .90.38) 5.2%No changeNo changeOn or before 12/31/

.

.

Coconut water in PET bottles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.06 Coconut water, not from concentrate, not containing added sugar or other sweetening matter, packaged for retail sale in polyethylene terephthalate bottles (provided for in subheading .89.70) FreeNo changeNo changeOn or before 12/31/

.

.

9,11-Octadecadienoic acid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.07 Conjugated linoleic acids (9Z,11E)-octadeca-9,11-dienoic acid (CAS No.'56'9), and (10E,12Z)-octadeca-10,12-dienoic acid (CAS No. '56'6) (provided for in subheading .90.98) FreeNo changeNo changeOn or before 12/31/

.

.

Liquid galacto-oligosaccharides

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.08Liquid galacto-oligosaccharides (provided for in subheading .90.98)FreeNo changeNo changeOn or before 12/31/

.

.

Beverage containing coconut water

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.09Non-alcoholic beverage containing 10 percent or more of not-from-concentrate coconut water, with added flavors and stevia, packaged for retail sale (provided for in subheading .10.00) FreeNo changeNo changeOn or before 12/31/

.

.

Animal feed additive containing guanidinoacetic acid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.10Feed additive preparation consisting of guanidinoacetic acid and starch (provided for in subheading .90.95)FreeNo changeNo changeOn or before 12/31/

.

.

Tungsten concentrate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.11Tungsten concentrate, presented as a dense, granular powder, in a range of colors from sandy brown to black/grey depending on the other elements present (provided for in subheading .00.60)FreeNo changeNo changeOn or before 12/31/

.

.

Piperylene

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.12Distillates (petroleum), C3-6, piperylene-rich (CAS No. '35'0) (provided for in subheading .12.90)3.5%No changeNo changeOn or before 12/31/

.

.

Normal paraffin M (alkanes C10'C14)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.13A mixture of normal paraffin medium oils (alkanes, C10'14) (CAS No. '07'3) (provided for in subheading .19.90) 5.8%No changeNo changeOn or before 12/31/

.

.

Neodymium (Nd) metal

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.14Neodymium metal (CAS No. '00'8), whether or not intermixed or interalloyed (provided for in subheading .30.00) FreeNo changeNo changeOn or before 12/31/

.

.

Praseodymium (Pr) metal

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.15Praseodymium metal (CAS No. '10'0), whether or not intermixed or interalloyed (provided for in subheading .30.00)FreeNo changeNo changeOn or before 12/31/

.

.

Heavy rare earth metals, dysprosium (Dy) metal and terbium (Tb) metal

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.16Dysprosium metal (CAS No. '91'6), terbium metal (CAS No. '27'9), and heavy rare earth metals, whether or not intermixed or inter-alloyed (provided for in subheading .30.00)FreeNo changeNo changeOn or before 12/31/

.

.

Scandium crystal

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.17Scandium crystals of 99.9 percent purity containing 3 ppm or less by weight of cobalt, 80 ppm or less by weight of chromium and 500 ppm or less by weight of iron (CAS No. '20'2) (provided for in subheading .30.00)FreeNo changeNo changeOn or before 12/31/

.

.

Hexafluorotitanic acid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.18Dihydrogen hexafluorotitanate(2-) (CAS No. '11'1) (provided for in subheading .19.61)FreeNo changeNo changeOn or before 12/31/

.

.

Silica gel cat litter with tray

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.19Cat litter of synthetic silica gel, not crystalline, imported with a disposable cardboard tray coated with polyvinyl chloride (provided for in subheading .22.10)FreeNo changeNo changeOn or before 12/31/

.

.

Dioxosilane spherical particles (mean particle size 0.046'0.054 mm)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.20Dioxosilane (silicon dioxide amorphous) (CAS No. '86'9) presented in the form of entirely spherical micro-spheres, certified by the importer as having a mean particle size of between 0.046 and 0.054 mm, uniform particle size with a uniformity coefficient of 1.65 or less, specific electrical resistance of 50,000 Ohm cm or more, and surface area 300 to 700 m²/g (provided for in subheading .22.10)FreeNo changeNo changeOn or before 12/31/

.

.

Silica gel cat litter

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.21Cat litter formulated from synthetic silica gel, put up for retail sale (provided for in subheading .22.10)FreeNo changeNo changeOn or before 12/31/

.

.

Sulfuryl dichloride

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.22Sulfuryl dichloride (CAS No. '25'5) (provided for in subheading .19.00)FreeNo changeNo changeOn or before 12/31/

.

.

FS-10D acicular electroconductive tin oxide

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.23Dispersions of tin(IV) oxide (CAS No. '10'5), doped with antimony pentoxide (CAS No. '60'9), in water (provided for in subheading .90.20)FreeNo changeNo changeOn or before 12/31/

.

.

Certain potassium fluoride

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.24Potassium fluoride (CAS No. '23'3), spray-dried, crystalline, granular or any dry form (provided for in subheading .19.90)FreeNo changeNo changeOn or before 12/31/

.

.

Other potassium fluoride

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.25Potassium fluoride (CAS No. '23'3) other than spray-dried, crystalline, granular or any dry form (provided for in subheading .19.90)FreeNo changeNo changeOn or before 12/31/

.

.

LiPF6

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.26Lithium hexafluorophosphate (LiPF6) (CAS No. '40'3) (provided for in subheading .90.90)1.8%No changeNo changeOn or before 12/31/

.

.

LiPO2F2

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.27Lithium difluorophosphate (LiPO2F2) (CAS No. '25'1) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Ammonium fluoroborate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.28Azanium; tetrafluoroborate (CAS No. '83'0) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Sodium tetrafluoroborate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.29Sodium tetrafluoroborate (CAS No. '29'8) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Ferric chloride

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.30Trichloroiron (CAS No. '08'0) (provided for in subheading .39.55)FreeNo changeNo changeOn or before 12/31/

.

.

Ferrous chloride

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.31Iron(2+);dichloride (CAS No. '94'3) (provided for in subheading .39.55)FreeNo changeNo changeOn or before 12/31/

.

.

Cupric chloride dihydrate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.32Copper(II) chloride dihydrate (cupric chloride dihydrate) (CAS No. '13'0) (provided for in subheading .39.90)FreeNo changeNo changeOn or before 12/31/

.

.

Copper chloride anhydrous

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.33Copper(II) chloride anhydrous (CAS No. '39'4) (provided for in subheading .39.90)FreeNo changeNo changeOn or before 12/31/

.

.

Manganese chloride anhydrous

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.34Manganese(2+);dichloride (anhydrous manganese chloride) (CAS No. '01'5) (provided for in subheading .39.90)FreeNo changeNo changeOn or before 12/31/

.

.

Manganese chloride tetrahydrate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.35Manganese(II) chloride tetrahydrate (CAS No. '34'9) (provided for in subheading .39.90)FreeNo changeNo changeOn or before 12/31/

.

.

Reducing agent

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.36Acetic acid, 2-oxo-, reaction products with sodium dithionite (2:1) (CAS No. '63'2) (provided for in subheading .10.50)FreeNo changeNo changeOn or before 12/31/

.

.

Manganese carbonate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.37Manganese(2+);carbonate (CAS No. 598'62'9) (provided for in subheading .99.50)FreeNo changeNo changeOn or before 12/31/

.

.

Potassium tetraborate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.38Potassium tetraborate (CAS No. '78'2) (provided for in subheading .20.00)FreeNo changeNo changeOn or before 12/31/

.

.

Potassium pentaborate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.39Potassium pentaborate (CAS No. '13'9) (provided for in subheading .20.00)FreeNo changeNo changeOn or before 12/31/

.

.

Ammonium thiocyanate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.40Azanium;thiocyanate (ammonium thiocyanate) (CAS No. '95'4) (provided for in subheading .90.10)FreeNo changeNo changeOn or before 12/31/

.

.

Modified amine complex of boron trifluoride

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.41Propan-2-amine, compound with trifluoroborane, reaction products with 2-(butoxymethyl)oxirane (amine complex of boron trifluoride) (CAS No. '97'7) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Trichlorosilane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.42Trichlorosilicon (CAS No. '78'2) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

1,3-Dichloropropene

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.43(E)-1,3-Dichloroprop-1-ene (CAS No. 542'75'6) (provided for in subheading .29.00)2.3%No changeNo changeOn or before 12/31/

.

.

Hexafluoroisobutylene (HFIB)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.443,3,3-Trifluoro-2-(trifluoromethyl)prop-1-ene (CAS No. 382'10'5) (provided for in subheading .39.20)FreeNo changeNo changeOn or before 12/31/

.

.

1,1,1,2,2,3,3,4,4,5,5,6,6-Tridecafluoro-8-iodooctane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.451,1,1,2,2,3,3,4,4,5,5,6,6-Tridecafluoro-8-iodooctane (CAS No. '57'4) (provided for in subheading .79.90)FreeNo changeNo changeOn or before 12/31/

.

.

Ethyl benzyl chloride

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.461-(Chloromethyl)-3-ethylbenzene (CAS No. '58'1) (provided for in subheading .99.80)FreeNo changeNo changeOn or before 12/31/

.

.

Perfluoroalkyl sulfonate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.47Potassium 1,1,2,2,3,3,4,4,4-nonafluorobutane-1-sulphonate (CAS No. '49'3) (provided for in subheading .99.50)FreeNo changeNo changeOn or before 12/31/

.

.

D-Mannitol

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.48(2R,3R,4R,5R)-Hexane-1,2,3,4,5,6-hexol (D-Mannitol) (CAS No. 69'65'8) (provided for in subheading .43.00)2.9%No changeNo changeOn or before 12/31/

.

.

3,3,4,4,5,5,6,6,7,7,8,8,8-Tridecafluorooctan-1-ol

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.493,3,4,4,5,5,6,6,7,7,8,8,8-Tridecafluorooctan-1-ol (CAS No. 647'42'7) (provided for in subheading .59.90)FreeNo changeNo changeOn or before 12/31/

.

.

Phenyl isopropanol

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.502-Phenylpropan-2-ol (CAS No. 617'94'7) (provided for in subheading .29.60)FreeNo changeNo changeOn or before 12/31/

.

.

Hydroxytyrosol

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.514-(2-Hydroxyethyl)benzene-1,2-diol (Hydroxytyrosol) (CAS No. '60'1) (provided for in subheading .29.90)FreeNo changeNo changeOn or before 12/31/

.

.

1,6-Dihydroxynaphthalene

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.52Naphthalene-1,6-diol (CAS No. 575'44'0) (provided for in subheading .29.90)FreeNo changeNo changeOn or before 12/31/

.

.

Antioxidant for plastics and rubber

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.53Antioxidant 330 (4-[[3,5-Bis[(3,5-ditert-butyl-4-hydroxyphenyl)methyl]-2,4,6-trimethylphenyl]methyl]-2,6-ditert-butylphenol) (CAS No. '70'2) (provided for in subheading .29.90)FreeNo changeNo changeOn or before 12/31/

.

.

Toluhydroquinone (THQ)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.542-Methylbenzene-1,4-diol (CAS No. 95'71'6) (provided for in subheading .29.90)FreeNo changeNo changeOn or before 12/31/

.

.

1,1,1-Tris(4-hydroxyphenyl)ethane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.554-[1,1-Bis(4-hydroxyphenyl)ethyl]phenol (CAS No. '94'8) (provided for in subheading .29.90)FreeNo changeNo changeOn or before 12/31/

.

.

mPEG6-mesylate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.56Methanesulfonic acid; 2-[2-[2-[2-[2-(2-methoxyethoxy) ethoxy]ethoxy]ethoxy]ethoxy] ethanol (CAS No. '39'4) (provided for in subheading .19.18) FreeNo changeNo changeOn or before 12/31/

.

.

Monoethylene glycol dimethyl ether

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.571,2-Dimethoxyethane (CAS No. 110'71'4) (provided for in subheading .19.60) FreeNo changeNo changeOn or before 12/31/

.

.

Diethylene glycol dimethyl ether

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.581-Methoxy-2-(2-methoxyethoxy)ethane (CAS No. 111'96'6) (provided for in subheading .19.60) FreeNo changeNo changeOn or before 12/31/

.

.

Diethylene glycol dibutyl ether

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.591-[2-(2-Butoxyethoxy)ethoxy]butane (CAS No. 112'73'2) (provided for in subheading .19.60) FreeNo changeNo changeOn or before 12/31/

.

.

Tetraethylene glycol dimethyl ether

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.60 1-Methoxy-2-[2-[2-(2-methoxyethoxy)ethoxy]ethoxy]ethane (CAS No. 143'24'8) (provided for in subheading .19.60) FreeNo changeNo changeOn or before 12/31/

.

.

Glycol diether

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.61 1-Methoxy-3-(3-methoxypropoxy)propane (CAS No. '77'4) (provided for in subheading .49.60) FreeNo changeNo changeOn or before 12/31/

.

.

Diglycidyl resorcinol ether

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.642-[[3-(Oxiran-2-ylmethoxy)phenoxy]methyl]oxirane (diglycidyl resorcinol ether) (CAS No. 101'90'6) (provided for in subheading .90.20) FreeNo changeNo changeOn or before 12/31/

.

.

Allyl glycidyl ether

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.662-(Prop-2-enoxymethyl)oxirane (allyl glycidyl ether) (CAS No. 106'92'3) (provided for in subheading .90.91) FreeNo changeNo changeOn or before 12/31/

.

.

Vinylcyclohexane monoxide

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.673-Ethenyl-7-oxabicyclo[4.1.0]heptane (CAS No. 106'86'5) (provided for in subheading .90.91) FreeNo changeNo changeOn or before 12/31/

.

.

Technical grade of butyl glycidyl ether

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.68Technical grade 2-(butoxymethyl)oxirane (CAS No. '08'6) (provided for in subheading .90.91) FreeNo changeNo changeOn or before 12/31/

.

.

Aliphatic glycidyl ether

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.692-(2-Ethylhexoxymethyl)oxirane (CAS No. '15'6) (provided for in subheading .90.91) FreeNo changeNo changeOn or before 12/31/

.

.

Diglycidyl ether of 1,4-butanediol

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.702-[4-(Oxiran-2-ylmethoxy)butoxymethyl]oxirane (CAS No. '79'8) (provided for in subheading .90.91) FreeNo changeNo changeOn or before 12/31/

.

.

Technical grade of the glycidyl ether of cyclohexane dimethanol

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.712-[[4-(Oxiran-2-ylmethoxymethyl) cyclohexyl]methoxymethyl]oxirane (1,4-bis((2,3-epoxypropoxy)methyl)cyclohexane technical) (CAS No. '73'0) (provided for in subheading .90.91) FreeNo changeNo changeOn or before 12/31/

.

.

Glycidyl ester of neodecanoic acid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.722,3-Epoxypropyl neodecanoate (CAS No. '45'5) (provided for in subheading .90.91) FreeNo changeNo changeOn or before 12/31/

.

.

Cumaldehyde

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.734-Propan-2-ylbenzaldehyde (Cumaldehyde) (CAS No. 122'03'2) (provided for in subheading .29.60) FreeNo changeNo changeOn or before 12/31/

.

.

Cyprinal

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.74α-Methylcinnamaldehyde (CAS No. 101'39'3) (provided for in subheading .29.60) FreeNo changeNo changeOn or before 12/31/

.

.

Sodium o-formylbenzenesulfonate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.75Sodium;2-formylbenzenesulfonate (CAS No. '72'6) (provided for in subheading .00.50) FreeNo changeNo changeOn or before 12/31/

.

.

Acetylacetone

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.76Pentane-2,4-dione (Acetylacetone) (CAS No. 123'54'6) (provided for in subheading .19.00) FreeNo changeNo changeOn or before 12/31/

.

.

Acetyl propionyl

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.77Pentane-2,3-dione (CAS No. 600'14'6) (provided for in subheading .19.00) FreeNo changeNo changeOn or before 12/31/

.

.

Alpha ionone

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.78(E)-4-(2,6,6-Trimethylcyclohex-2-en-1-yl)but-3-en-2-one (α-ionone) derived from natural sources (CAS No. 127'41'3) (provided for in subheading .23.00) FreeNo changeNo changeOn or before 12/31/

.

.

2,3,4,5 Tetramethylcyclopent-2-enone

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.792,3,4,5-Tetramethylcyclopent-2-enone (CAS No. '61'6) (provided for in subheading .29.50) FreeNo changeNo changeOn or before 12/31/

.

.

Menthone

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.80Menthone ((2S,5R)-5-methyl-2-propan-2-ylcyclohexan-1-one) derived from natural sources (CAS No. 89'80'5) (provided for in subheading .29.50) FreeNo changeNo changeOn or before 12/31/

.

.

L-Carvone

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.81(5R)-2-Methyl-5-(prop-1-en-2-yl)cyclohex-2-en-1-one (L-carvone) (CAS No. '40'1) (provided for in subheading .29.50) FreeNo changeNo changeOn or before 12/31/

.

.

Benzoin

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.822-Hydroxy-1,2-diphenylethanone (Benzoin) (CAS No. 119'53'9) (provided for in subheading .40.40) FreeNo changeNo changeOn or before 12/31/

.

.

Methyl cyclopentenolone

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.83Methyl cyclopentenolone (2-hydroxy-3-methylcyclopent-2-en-1-one) (CAS No. 80'71'7) (provided for in subheading .40.90) FreeNo changeNo changeOn or before 12/31/

.

.

2,4-Dihydroxy-1,5-dibenzoylbenzene

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.84 (4,6-Dihydroxy-1,3-phenylene)bis(phenylmethanone) (CAS No. '15'1) (provided for in subheading .50.30) FreeNo changeNo changeOn or before 12/31/

.

.

Difluorobenzophenone (DFBP)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.85 Bis(4-fluorophenyl)methanone (CAS No. 345'92'6) (provided for in subheading .79.40) 2.3%No changeNo changeOn or before 12/31/

.

.

PTMI

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.862-Methyl-1-[4-(trifluoromethoxy)phenyl]propan-1-one (CAS No. '84'4) (provided for in subheading .79.40) FreeNo changeNo changeOn or before 12/31/

.

.

Metrafenone

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.87(3-Bromo-6-methoxy-2-methylphenyl)(2,3,4-trimethoxy-6- methylphenyl)methanone (Metrafenone) (CAS No. '03'6) (provided for in subheading .79.40) FreeNo changeNo changeOn or before 12/31/

.

.

Hexachloroacetone

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.88Hexachloroacetone; 1,1,1,3,3,3-hexachloropropan-2-one (CAS No. 116'16'5) (provided for in subheading .79.90) FreeNo changeNo changeOn or before 12/31/

.

.

Fire suppression agent

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.891,1,1,2,2,4,5,5,5-nonafluoro-4-(trifluoromethyl)pentan-3-one (CAS No. 756'13'8) (provided for in subheading .79.90) FreeNo changeNo changeOn or before 12/31/

.

.

D(+)-10-Camphor sulfonic acid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.90(1S,4R)-7,7-Dimethyl-2-oxo-1-bicyclo[2.2.1]heptanyl] methanesulfonic acid (CAS No. '16'9) (provided for in subheading .79.90) FreeNo changeNo changeOn or before 12/31/

.

.

Benzyl acetate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.91Benzyl acetate (CAS No. 140'11'4) (provided for in subheading .39.10) FreeNo changeNo changeOn or before 12/31/

.

.

Propylene glycol diacetate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.922-Acetyloxypropyl acetate (CAS No. 623'84'7) (provided for in subheading .39.47) FreeNo changeNo changeOn or before 12/31/

.

.

Isopropenyl acetate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.93Prop-1-en-2-yl acetate (Isopropenyl acetate) (CAS No. 108'22'5) (provided for in subheading .39.90) FreeNo changeNo changeOn or before 12/31/

.

.

Diacetin

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.94(2-Acetyloxy-3-hydroxypropyl) acetate (CAS No. '31'7) (provided for in subheading .39.90) FreeNo changeNo changeOn or before 12/31/

.

.

Cocoamine

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.95Amines, coco alkyl (Cocoamine) (CAS No. '46'3) (provided for in subheading .90.10) FreeNo changeNo changeOn or before 12/31/

.

.

Caprylic acid 98%

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.96Decanoic acid (CAS No. 334'48'5) (provided for in subheading .90.10) FreeNo changeNo changeOn or before 12/31/

.

.

Fine zinc myristate powder

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.97Zinc myristate powder, 99 percent is under 300 mesh (CAS No. '27'8) (provided for in subheading .90.50) FreeNo changeNo changeOn or before 12/31/

.

.

Fine magnesium myristate powder

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.98Magnesium tetradecanoate powder (CAS No. '70'8) (provided for in subheading .90.50) FreeNo changeNo changeOn or before 12/31/

.

.

Dipentaerythrityl hexahydroxystearate/hexastearate/hexarosinate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.19.99Dipentaerythrityl mixed esters with stearate, 12-hydroxyoctadecanoate and resinate, two acidic residues (CAS No. '52'7) (provided for in subheading .90.50) FreeNo changeNo changeOn or before 12/31/

.

.

Polyglyceryl-2 triisostearate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.01 [3-[2,3-bis(16-Methylheptadecanoyloxy)propoxy]-2-hydroxypropyl] 16-methylheptadecanoate (CAS No. '24'0) (provided for in subheading .90.50) FreeNo changeNo changeOn or before 12/31/

.

.

Neopentyl glycol diethylhexanoate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.02[3-(2-Ethylhexanoyloxy)-2,2-dimethylpropyl] 2-ethylhexanoate (CAS No. '23'8) (provided for in subheading .90.50) FreeNo changeNo changeOn or before 12/31/

.

.

Isononyl isononate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.037-Methyloctyl 7-methyloctanoate (CAS No. '25'9) (provided for in subheading .90.50) FreeNo changeNo changeOn or before 12/31/

.

.

Acetyl chloride

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.04Acetyl chloride (CAS No. 75'36'5) (provided for in subheading .90.50) FreeNo changeNo changeOn or before 12/31/

.

.

Potassium sorbate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.05Potassium;(2E,4E)-hexa-2,4-dienoate (Potassium sorbate) (CAS No. '61'5) (provided for in subheading .19.10) 2%No changeNo changeOn or before 12/31/

.

.

Vinyl chloroformate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.06Ethenyl carbonochloridate (Vinyl chloroformate) (CAS No. '24'5) (provided for in subheading .19.50) FreeNo changeNo changeOn or before 12/31/

.

.

Permethrin

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.07(3-Phenoxyphenyl)methyl 3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropane-1-carboxylate (Permethrin) (CAS No. '53'1) (provided for in subheading .20.50) FreeNo changeNo changeOn or before 12/31/

.

.

Sodium benzoate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.08Micronized sodium benzoate (CAS No. 532'32'1) of a kind used as a polymer modifier (provided for in subheading .31.11) FreeNo changeNo changeOn or before 12/31/

.

.

Benzoic acid, flake

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.09Benzoic acid, flake (CAS No. 65'85'0) (provided for in subheading .31.11) 4.3%No changeNo changeOn or before 12/31/

.

.

Diethylene glycol dibenzoate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.102-(2-Benzoyloxyethoxy)ethyl benzoate (CAS No. 120'55'8) (provided for in subheading .31.30) 1%No changeNo changeOn or before 12/31/

.

.

Methyl benzoate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.11Methyl benzoate (CAS No. 93'58'3) (provided for in subheading .31.50) FreeNo changeNo changeOn or before 12/31/

.

.

M-Nitrobenzoic acid sodium salt

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.12Sodium; 3-nitrobenzoate (CAS No. 827'95'2) (provided for in subheading .39.79) FreeNo changeNo changeOn or before 12/31/

.

.

p-Nitrobenzoic acid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.134-Nitrobenzoic acid (CAS No. 62'23'7) (provided for in subheading .39.79) FreeNo changeNo changeOn or before 12/31/

.

.

4-tert Butylbenzoic acid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.144-tert-Butylbenzoic acid (CAS No. 98'73'7) (provided for in subheading .39.79) FreeNo changeNo changeOn or before 12/31/

.

.

Sodium adipate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.15Disodium;hexanedioate (Sodium adipate) (CAS No. '38'6), in granule form, with a particle size of 250 µm to 850 µm (provided for in subheading .12.50) FreeNo changeNo changeOn or before 12/31/

.

.

Dimethyl sebacate (DMS)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.16Dimethyl sebacate (CAS No. 106'79'6) (provided for in subheading .13.00) FreeNo changeNo changeOn or before 12/31/

.

.

Dodecanedioic acid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.17Dodecanedioic acid (CAS No. 693'23'2) (provided for in subheading .19.70) 2.8%No changeNo changeOn or before 12/31/

.

.

Polyhydroxystearic acid of low acid value

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.18Acyclic polycarboxylic containing octadecanoic acid, 12-hydroxy-, homopolymer, octadecanoate with an acid value less than 40 mg/g KOH (CAS No. '22'6) (provided for in subheading .19.70) FreeNo changeNo changeOn or before 12/31/

.

.

Undecanedioic acid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.19Undecanedioic acid (CAS No. '04'6) (provided for in subheading .19.70) FreeNo changeNo changeOn or before 12/31/

.

.

Hexadecanedioic acid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.20Hexadecanedioic acid (CAS No. 505'54'4) (provided for in subheading .19.70) FreeNo changeNo changeOn or before 12/31/

.

.

Tetradecanedioic acid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.21Tetradecanedioic acid (CAS No. 821'38'5) (provided for in subheading .19.70) FreeNo changeNo changeOn or before 12/31/

.

.

Pentadecanedioic acid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.22Pentadecanedioic acid (CAS No. '18'0) (provided for in subheading .19.70) FreeNo changeNo changeOn or before 12/31/

.

.

Tridecanedioic acid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.23Tridecanedioic acid (CAS No. 505'52'2) (provided for in subheading .19.70) FreeNo changeNo changeOn or before 12/31/

.

.

Methyl 1-(methoxycarbonyl)cyclopropanecarboxylate (CPDM)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.24Dimethyl 1,1-cyclopropanedicarboxylate (CAS No. '71'2) (provided for in subheading .20.00) FreeNo changeNo changeOn or before 12/31/

.

.

Calcium HHPA

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.25Calcium (1S,2R)-cyclohexane-1,2-dicarboxylate (CAS No. '22'1) (provided for in subheading .20.00) FreeNo changeNo changeOn or before 12/31/

.

.

Diethyl phthalate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.26Diethyl benzene-1,2-dicarboxylate (CAS No. 84'66'2) (provided for in subheading .34.01) FreeNo changeNo changeOn or before 12/31/

.

.

Ammonium lactate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.27Ammonium lactate (Azanium;2-hydroxypropanoate) (CAS No. 515'98'0) having a purity of at least 99 percent (provided for in subheading .11.51) FreeNo changeNo changeOn or before 12/31/

.

.

Triethyl 2-hydroxypropane-1,2,3-tricarboxylate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.28Triethyl 2-hydroxypropane-1,2,3-tricarboxylate (CAS No. 77'93'0) (provided for in subheading .15.50) FreeNo changeNo changeOn or before 12/31/

.

.

Diisostearyl malate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.29Carboxylic acid of bis(16-methylheptadecyl) 2-hydroxybutanedioate (CAS No. '05'9) (provided for in subheading .19.90) FreeNo changeNo changeOn or before 12/31/

.

.

Salicylic acid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.302-Hydroxybenzoic acid (salicylic acid) (CAS No. 69'72'7) (provided for in subheading .21.50) FreeNo changeNo changeOn or before 12/31/

.

.

Hexyl salicylate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.31Hexyl 2-hydroxybenzoate (CAS No. '76'3) (provided for in subheading .23.20) FreeNo changeNo changeOn or before 12/31/

.

.

Alpha-ketogluteric acid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.32Alpha-ketogluteric acid (2-oxopentanedioic acid) (CAS No. 328'50'7) (provided for in subheading .30.90) FreeNo changeNo changeOn or before 12/31/

.

.

MCPB herbicide

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.334-(4-Chloro-2-methylphenoxy) butyric acid (CAS No. 94'81'5) (provided for in subheading .99.18) FreeNo changeNo changeOn or before 12/31/

.

.

2,4-D Butoxyethylester

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.342-Butoxyethyl 2-(2,4-dichlorophenoxy)acetate (CAS No. '73'3) (provided for in subheading .99.20) FreeNo changeNo changeOn or before 12/31/

.

.

2-(2,4-Dichlorophenoxy)acetic acid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.352-(2,4-Dichlorophenoxy)acetic acid (CAS No. 94'75'7) (provided for in subheading .99.20) 4.9%No changeNo changeOn or before 12/31/

.

.

Diglycolic acid 98%

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.362-(Carboxymethoxy)acetic acid (diglycolic acid) having a purity of at least 98 percent (CAS No. 110'99'6) (provided for in subheading .99.50) FreeNo changeNo changeOn or before 12/31/

.

.

Tri-iso-butyl phosphate (TiBP)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.37tris(2-Methylpropyl) phosphate (CAS No. 126'71'6) (provided for in subheading .90.50) FreeNo changeNo changeOn or before 12/31/

.

.

Trimethylphosphite

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.38Trimethyl phosphite (CAS No. 121'45'9) (provided for in subheading .23.00) FreeNo changeNo changeOn or before 12/31/

.

.

Organic phosphite

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.391,9-Dicyclohexyl-11-hydroxy-3,7-dimethyl-5H-benzo[d] [1,3,2]benzodioxaphosphocine (CAS No. '21'7) (provided for in subheading .90.20) FreeNo changeNo changeOn or before 12/31/

.

.

Diethyl sulfate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.40Diethyl sulfate (CAS No. 64'67'5) (provided for in subheading .90.51) FreeNo changeNo changeOn or before 12/31/

.

.

Diethyl carbonate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.41Diethyl carbonate (CAS No. 105'58'8) (provided for in subheading .90.51) FreeNo changeNo changeOn or before 12/31/

.

.

Ethyl methyl carbonate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.42Ethyl methyl carbonate (CAS No. 623'53'0) (provided for in subheading .90.51) 2.7%No changeNo changeOn or before 12/31/

.

.

Tetradecoxycarbonyloxy tetradecyl carbonate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.43Tetradecoxycarbonyloxy tetradecyl carbonate (CAS No. '22'7) (provided for in subheading .90.51) FreeNo changeNo changeOn or before 12/31/

.

.

Dicetyl peroxydicarbonate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.44Hexadecoxycarbonyloxy hexadecyl carbonate (CAS No. '14'5) (provided for in subheading .90.51) FreeNo changeNo changeOn or before 12/31/

.

.

Tetraethyl silicate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.45Tetraethyl silicate (CAS No. 78'10'4) (provided for in subheading .90.51) FreeNo changeNo changeOn or before 12/31/

.

.

tert-Octylamine

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.462,4,4-Trimethylpentan-2-amine (CAS No. 107'45'9) (provided for in subheading .19.61) FreeNo changeNo changeOn or before 12/31/

.

.

Octadecylamine

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.47Octadecan-1-amine (Octadecylamine) (CAS No. 124'30'1) (provided for in subheading .19.61) FreeNo changeNo changeOn or before 12/31/

.

.

N'-(3-Aminopropyl)-N'-dodecylpropane-1,3-diamine

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.48N'-(3-Aminopropyl)-N'-dodecylpropane-1,3-diamine (CAS No. '82'9) (provided for in subheading .29.00)FreeNo changeNo changeOn or before 12/31/

.

.

1,10-Diaminodecane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.49Decane-1,10-diamine (CAS No. 646'25'3) (provided for in subheading .29.00) FreeNo changeNo changeOn or before 12/31/

.

.

1,5-Pentanediamine

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.50Pentane-1,5-diamine (CAS No. 462'94'2) (provided for in subheading .29.00) FreeNo changeNo changeOn or before 12/31/

.

.

Dicyclohexylamine

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.51N-cyclohexylcyclohexanamine (CAS No. 101'83'7) (provided for in subheading .30.30) FreeNo changeNo changeOn or before 12/31/

.

.

Amantadine hydrochloride 99%

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.52Adamantan-1-amine hydrochloride having a purity of at least 99 percent (CAS No. 665'66'7) (provided for in subheading .30.50) FreeNo changeNo changeOn or before 12/31/

.

.

N,N-Dimethylaniline

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.53N,N-Dimethylaniline (CAS No. 121'69'7) (provided for in subheading .42.10) FreeNo changeNo changeOn or before 12/31/

.

.

Paranitroaniline (PNA)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.54p-Nitroaniline (CAS No. 100'01'6) (provided for in subheading .42.90) FreeNo changeNo changeOn or before 12/31/

.

.

Dicloran

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.552,6-Dichloro-4-nitroaniline (Dicloran) (CAS No. 99'30'9) (provided for in subheading .42.90) FreeNo changeNo changeOn or before 12/31/

.

.

N,N-Dimethyl-p-toluidine

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.56N,N-Dimethyl-p-toluidine (CAS No. 99'97'8) (provided for in subheading .43.08) FreeNo changeNo changeOn or before 12/31/

.

.

Pendimethalin technical

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.573,4-Dimethyl-2,6-dinitro-N-pentan-3-ylaniline (Pendimethalin) (CAS No. '42'1) (provided for in subheading .49.50) FreeNo changeNo changeOn or before 12/31/

.

.

Benzyldimethylamine

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.58N,N-Dimethyl-1-phenylmethanamine (CAS No. 103'83'3) (provided for in subheading .49.50) FreeNo changeNo changeOn or before 12/31/

.

.

Diphenyl diphenylene diamine

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.591-N,4-N-Diphenylbenzene-1,4-diamine (CAS No. 74'31'7) (provided for in subheading .51.50) FreeNo changeNo changeOn or before 12/31/

.

.

Curative for epoxy resin systems

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.604-[(4-Amino-3-methyl-5-propan-2-ylphenyl)methyl]-2-methyl-6-propan-2-ylaniline (CAS No. '38'7) (provided for in subheading .59.40) FreeNo changeNo changeOn or before 12/31/

.

.

TFMB

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.614-[4-Amino-2-(trifluoromethyl)phenyl]-3-(trifluoromethyl)aniline (CAS No. 341'58'2) (provided for in subheading .59.80) FreeNo changeNo changeOn or before 12/31/

.

.

S-N-Alkyl-anilin

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.622-Ethyl-N-[(2S)-1-methoxypropan-2-yl]-6-methylaniline (CAS No. '70'9) (provided for in subheading .19.60) 2.9%No changeNo changeOn or before 12/31/

.

.

p-Cresidine

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.632-Methoxy-5-methylaniline (CAS No. 120'71'8) (provided for in subheading .29.81) FreeNo changeNo changeOn or before 12/31/

.

.

Iminodiacetic acid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.642-(Carboxymethylamino)acetic acid (CAS No. 142'73'4) (provided for in subheading .49.49) 1%No changeNo changeOn or before 12/31/

.

.

11 Aminoundecanoic acid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.-Aminoundecanoic acid (CAS No. '99'7) (provided for in subheading .49.49) 2.6%No changeNo changeOn or before 12/31/

.

.

L-Orinithine L-aspartate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.66(2S)-2-Aminobutanedioic acid;(2S)-2,5-diaminopentanoic acid (CAS No. '94'2) (provided for in subheading .49.49) FreeNo changeNo changeOn or before 12/31/

.

.

Iron sodium DTPA

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.67Sodium 2-[bis[2-[bis(carboxymethyl) amino]ethyl]amino]acetate iron (CAS No. '75'2) (provided for in subheading .49.80) FreeNo changeNo changeOn or before 12/31/

.

.

Iron glycinate complex

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.68Ferrate(2-), hexaaqua[μ-(glycinato-κO:κO')](glycinato-κO)bis[sulfato(2-)-κO]di-, dihydrogen (CAS No. '51'3) (provided for in subheading .49.80) FreeNo changeNo changeOn or before 12/31/

.

.

Copper glycinate complex

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.69Cuprate(1-), diaqua(glycinato-κO)[sulfato(2-)-κO]-, hydrogen (CAS No. '53'5) (provided for in subheading .49.80) FreeNo changeNo changeOn or before 12/31/

.

.

Zinc glycinate complex

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.70Zincate(1-), diaqua(glycinato-κO)[sulfato(2-)-κO]-, hydrogen, (T-4)- (CAS No. '54'6) (provided for in subheading .49.80) FreeNo changeNo changeOn or before 12/31/

.

.

Manganese glycinate complex

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.71Manganese(2+) 2-aminoacetate (CAS No. '77'7) (provided for in subheading .49.80) FreeNo changeNo changeOn or before 12/31/

.

.

Iron sodium EDDHA

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.72Iron sodium ethylenediaminedihydroxyphenylacetic acid (sodium [[α,α'-(ethylenediimino)bis[2-hydroxybenzene-1-acetato]](4-)]ferrate(1-)) (CAS No. '61'1) (provided for in subheading .50.35) FreeNo changeNo changeOn or before 12/31/

.

.

DMF-DMA

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.731,1-Dimethoxy-N,N-dimethylmethanamine (CAS No. '24'5) (provided for in subheading .50.50) FreeNo changeNo changeOn or before 12/31/

.

.

Mixtures of DMSO and tetrabutyl ammonium fluoride

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.74Mixtures of methylsulfinylmethane (Dimethyl sulfoxide DMSO) (CAS No. 67'68'5) and tetrabutylammonium fluoride trihydrate (tetrabutylazanium;fluoride;trihydrate) (CAS No. '50'6) (60:40) (provided for in subheading .90.01) FreeNo changeNo changeOn or before 12/31/

.

.

Betaine

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.75Betaine (2-(trimethylazaniumyl)acetate) (CAS No. 107'43'7) (provided for in subheading .90.01) FreeNo changeNo changeOn or before 12/31/

.

.

Prolonium chloride in aqueous solution

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.76Aqueous solution of [2-hydroxy-3-(trimethylazaniumyl)propyl]-trimethylazanium;dichloride with a concentration of greater than 49 percent and less than 51 percent by weight (CAS No. '09'4) (provided for in subheading .90.01) FreeNo changeNo changeOn or before 12/31/

.

.

N,N-Dimethylacetamide

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.77N,N-Dimethylacetamide (CAS No. 127'19'5) (provided for in subheading .19.11)2%No changeNo changeOn or before 12/31/

.

.

N,N-Dimethylformamide

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.78N,N-Dimethylformamide (CAS No. 68'12'2) (provided for in subheading .19.11)1.2%No changeNo changeOn or before 12/31/

.

.

DAAM

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.79N-(2-Methyl-4-oxo-2-pentanyl)acrylamide (CAS No. '97'4) (provided for in subheading .19.80)FreeNo changeNo changeOn or before 12/31/

.

.

L-Alanyl L-glutamine

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.80L-Alanyl L-glutamine ((2S)-5-amino-2-[[(2S)-2-aminopropanoyl]amino]-5-oxopentanoic acid) (CAS No. '23'0) (provided for in subheading .19.80)FreeNo changeNo changeOn or before 12/31/

.

.

Granular acrylamido-tert-butyl sulfonic acid (ATBS)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.81Granular 2-methyl-2-(prop-2-enoylamino)propane-1-sulfonic acid (CAS No. '89'8) (provided for in subheading .19.80)6%No changeNo changeOn or before 12/31/

.

.

Glycyl-L-glutamine hydrate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.82Glycyl-L-glutamine hydrate ((2S)-5-amino-2-[(2-aminoacetyl)amino]-5-oxopentanoic acid;hydrate) (CAS No. '46'7) (provided for in subheading .19.80)FreeNo changeNo changeOn or before 12/31/

.

.

Noviflumuron

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.83N-[[3,5-Dichloro-2-fluoro-4-(1,1,2,3,3,3-hexafluoropropoxy)phenyl]carbamoyl]-2,6-difluorobenzamide (Noviflumuron) (CAS No. '02'3) (provided for in subheading .21.20)FreeNo changeNo changeOn or before 12/31/

.

.

Propanil technical

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.84N-(3,4-dichlorophenyl)propanamide (CAS No. 709'98'8) (provided for in subheading .29.47)FreeNo changeNo changeOn or before 12/31/

.

.

Hexaflumuron

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.85N-[[3,5-Dichloro-4-(1,1,2,2-tetrafluoroethoxy)phenyl]carbamoyl]-2,6-difluorobenzamide (Hexaflumuron) (CAS No. '06'3) (provided for in subheading .29.47)4.4%No changeNo changeOn or before 12/31/

.

.

Stabilizer for plastics and rubber

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.863-(3,5-Ditert-butyl-4-hydroxyphenyl)-N-[3-[3-(3,5-ditert-butyl-4-hydroxyphenyl) propanoylamino]propyl]propanamide (CAS No. '61'2) (provided for in subheading .29.71)FreeNo changeNo changeOn or before 12/31/

.

.

2-Amino-5-chloro-N,3-dimethylbenzamide

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.872-Amino-5-chloro-N,3-dimethylbenzamide (CAS No. '28'5) (provided for in subheading .29.71)6.1%No changeNo changeOn or before 12/31/

.

.

Glycyl-L-tyrosine dihydrate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.88Glycyl-L-tyrosine dihydrate ((2S)-2-[(2-aminoacetyl)amino]-3-(4-hydroxyphenyl)propanoic acid;dihydrate) (CAS No. '46'1) (provided for in subheading .29.71)FreeNo changeNo changeOn or before 12/31/

.

.

L-Alanyl-L-tyrosine

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.89L-Alanyl L-tyrosine ((2S)-2-[[(2S)-2-aminopropanoyl]amino]-3-(4-hydroxyphenyl)propanoic acid) (CAS No. '88'9) (provided for in subheading .29.71)FreeNo changeNo changeOn or before 12/31/

.

.

Enzalutamide ITS-2

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.902-[3-Fluoro-4-(methylcarbamoyl)anilino]-2-methylpropanoic acid (CAS No. '66'0) (provided for in subheading .29.71)FreeNo changeNo changeOn or before 12/31/

.

.

4-Bromo-2-fluoro-N-methylbenzamide

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.914-Bromo-2-fluoro-N-methylbenzamide (CAS No. '69'3) (provided for in subheading .29.71)FreeNo changeNo changeOn or before 12/31/

.

.

N-Boc-1-aminocyclobutanecarboxylic acid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.921-[(2-Methylpropan-2-yl)oxycarbonylamino] cyclobutane-1-carboxylic acid (CAS No. '10'1) (provided for in subheading .29.95)FreeNo changeNo changeOn or before 12/31/

.

.

N'-(1,3-dimethylbutylidene)-3-hydroxy-2-naphthohydrazide (BMH) (oil treated)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.933-Hydroxy-N-[(Z)-4-methylpentan-2-ylideneamino]naphthalene-2-carboxamide (CAS No. '91'1), oil treated (provided for in subheading .19.42)3.5%No changeNo changeOn or before 12/31/

.

.

Guanidine sulfamate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.94Guanidine sulfamic acid (CAS No. '18'5) (provided for in subheading .29.90)FreeNo changeNo changeOn or before 12/31/

.

.

Liquid, blocked cycloaliphatic diamine used as crosslinker for polyisocyanate resins

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.952-Methyl-N-[[1,3,3-trimethyl-5-(2-methylpropylideneamino)cyclohexyl]methyl]propan-1-imine (CAS No. '37'3) (provided for in subheading .29.90)FreeNo changeNo changeOn or before 12/31/

.

.

3,4-Difluorobenzonitrile

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.963,4-Difluorobenzonitrile (CAS No. '62'0) (provided for in subheading .90.43)FreeNo changeNo changeOn or before 12/31/

.

.

2-Amino-5-cyano-N,3-dimethylbenzamide

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.972-Amino-5-cyano-N,3-dimethylbenzamide (CAS No. '29'6) (provided for in subheading .90.43)4.5%No changeNo changeOn or before 12/31/

.

.

TFMPA

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.982-[3-(Trifluoromethyl)phenyl]acetonitrile (CAS No. '76'3) (provided for in subheading .90.48)FreeNo changeNo changeOn or before 12/31/

.

.

Dimethyl 2,2'-Azobisisobutyrate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.20.99Methyl 2-[(1-methoxy-2-methyl-1-oxopropan-2-yl)diazenyl]-2-methylpropanoate (CAS No. '57'3) (provided for in subheading .00.40)FreeNo changeNo changeOn or before 12/31/

.

.

Antioxidant/metal deactivator

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.013-(3,5-Ditert-butyl-4-hydroxyphenyl)-N'-[3-(3,5-ditert-butyl-4-hydroxyphenyl)propanoyl]propanehydrazide (CAS No. '78'8) (provided for in subheading .00.25)FreeNo changeNo changeOn or before 12/31/

.

.

Benzyl carbazate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.02Benzyl N-aminocarbamate (CAS No. '43'1) (provided for in subheading .00.25)FreeNo changeNo changeOn or before 12/31/

.

.

Benzene-1,3-dicarbohydrazide

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.03Benzene-1,3-dicarbohydrazide (CAS No. '98'7) (provided for in subheading .00.25)FreeNo changeNo changeOn or before 12/31/

.

.

Input for resins, coatings, and other products

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.041,3-Bis(isocyanatomethyl) cyclohexane (CAS No. '72'2) (provided for in subheading .10.55)FreeNo changeNo changeOn or before 12/31/

.

.

Aldicarb

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.05[(E)-(2-Methyl-2-methylsulfanylpropylidene)amino] N-methylcarbamate (Aldicarb) (CAS No. 116'06'3) (provided for in subheading .80.00)2.9%No changeNo changeOn or before 12/31/

.

.

Flubendiamide

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.061-N-[4-(1,1,1,2,3,3,3-Heptafluoropropan-2-yl)-2-methylphenyl]-3-iodo-2-N-(2-methyl-1-methylsulfonylpropan-2-yl)benzene-1,2-dicarboxamide (Flubendiamide) (CAS No. '65'7) (provided for in subheading .90.10)FreeNo changeNo changeOn or before 12/31/

.

.

Benzobicyclon

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.073-[2-Chloro-4-(methylsulfonyl)benzoyl]-4-(phenylsulfanyl)bicyclo[3.2.1]oct-3-en-2-one (Benzobicyclon) (CAS No. '66'5) (provided for in subheading .90.10)FreeNo changeNo changeOn or before 12/31/

.

.

Diphenylsulfone (DPS)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.08Benzenesulfonylbenzene (CAS No. 127'63'9) (provided for in subheading .90.29)FreeNo changeNo changeOn or before 12/31/

.

.

Phenolic antioxidant

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.092,4-bis(Dodecylsulfanylmethyl)-6-methylphenol (CAS No. '26'8) (provided for in subheading .90.29)FreeNo changeNo changeOn or before 12/31/

.

.

Phenolic antioxidant and heat stabilizer

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.102-[2-[3-(3,5-ditert-Butyl-4-hydroxyphenyl)propanoyloxy] ethylsulfanyl]ethyl 3-(3,5-ditert-butyl-4-hydroxyphenyl)propanoate (CAS No. '35'9) (provided for in subheading .90.29)FreeNo changeNo changeOn or before 12/31/

.

.

Phenylchlorothioformate (PTCFM)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.11o-Phenyl chloromethanethioate (CAS No. '56'7) (provided for in subheading .90.29)FreeNo changeNo changeOn or before 12/31/

.

.

Methylene bis thiocyanate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.12Thiocyanatomethyl thiocyanate (CAS No. '18'6) (provided for in subheading .90.30)FreeNo changeNo changeOn or before 12/31/

.

.

Oxamyl

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.13Methyl (1Z)-2-(dimethylamino)-N-(methylcarbamoyloxy)-2-oxoethanimidothioate (CAS No. '22'0) (provided for in subheading .90.43)FreeNo changeNo changeOn or before 12/31/

.

.

L-Cystine

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.14(2R)-2-Amino-3-[[(2R)-2-amino-2-carboxyethyl]disulfanyl]propanoic acid (CAS No. 56'89'3) (provided for in subheading .90.49)FreeNo changeNo changeOn or before 12/31/

.

.

L-Cysteine

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.15(2R)-2-Amino-3-sulfanylpropanoic acid (L-cysteine) (CAS No. 52'90'4) (provided for in subheading .90.49)FreeNo changeNo changeOn or before 12/31/

.

.

N,N'-Bis-L-alanyl-L-cystine

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.162-(2-Aminopropanoylamino)-3-[[2-(2-aminopropanoylamino)-2-carboxyethyl]disulfanyl]propanoic acid (N,N'-bis-L-alanyl-L-cystine) (CAS No. '13'6) (provided for in subheading .90.49)FreeNo changeNo changeOn or before 12/31/

.

.

Lubricant additive

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.173-[bis(2-Methylpropoxy)phosphinothioylsulfanyl]-2-methylpropanoic acid (CAS No. '32'4) (provided for in subheading .90.49)FreeNo changeNo changeOn or before 12/31/

.

.

Sodium benzenesulfinate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.18Sodium benzenesulfinate (CAS No. 873'55'2) (provided for in subheading .90.91)FreeNo changeNo changeOn or before 12/31/

.

.

Thio-ether based co-stabilizer for plastics

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.191-(Octadecyldisulfanyl)octadecane (CAS No. '88'1) (provided for in subheading .90.91)FreeNo changeNo changeOn or before 12/31/

.

.

L-Cysteine hydrate hydrochloride

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.20(2R)-2-Amino-3-sulfanylpropanoic acid;hydrate;hydrochloride (CAS No. '04'6) (provided for in subheading .90.91)FreeNo changeNo changeOn or before 12/31/

.

.

Dimercaprol

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.212,3-Bis(sulfanyl)propan-1-ol (CAS No. 59'52'9) (provided for in subheading .90.91)FreeNo changeNo changeOn or before 12/31/

.

.

Monoammonium salt of glyphosate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.22Azane;2-(phosphonomethylamino)acetic acid (CAS No. '66'5) (provided for in subheading .39.00)FreeNo changeNo changeOn or before 12/31/

.

.

THPC

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.23Tetrakis(hydroxymethyl) phosphonium chloride (CAS No. 124'64'1) (provided for in subheading .39.00)FreeNo changeNo changeOn or before 12/31/

.

.

Flame retardant for textiles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.24Tetrakis(hydroxymethyl) phosphonium sulfate (CAS No. '30'8) (provided for in subheading .39.00)1.5%No changeNo changeOn or before 12/31/

.

.

Glyphosate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.25N-(Phosphonomethyl)glycine (Glyphosate) (CAS No. '83'6) (provided for in subheading .39.00)3.5%No changeNo changeOn or before 12/31/

.

.

Ethephon

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.26(2-Chloroethyl)phosphonic acid (Ethephon) (CAS No. '87'0) (provided for in subheading .39.00)2.4%No changeNo changeOn or before 12/31/

.

.

Benzene phosphinic acid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.27Phenylphosphinic acid (CAS No. '48'2) (provided for in subheading .39.00)FreeNo changeNo changeOn or before 12/31/

.

.

HEDP

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.28Tetrasodium;1,1-diphosphonatoethanol (CAS No. '83'0), in granule form, with a particle size of 250 µm to 850 µm (provided for in subheading .39.00)FreeNo changeNo changeOn or before 12/31/

.

.

Trimethylchlorosilane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.29Chloro(trimethyl)silane (CAS No. 75'77'4) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Chloro-(chloromethyl)-dimethylsilane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.30Chloro-(chloromethyl)-dimethylsilane (CAS No. '57'9) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Silicone for electronics cleaners

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.31[Dimethyl(trimethylsilyloxy) silyl]oxy-dimethyl-trimethylsilyloxysilane (CAS No. 141'62'8) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Silicon carrier fluid for active lotions, creams

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.32Dodecamethylpentasiloxane; bis[[dimethyl (trimethylsilyloxy)silyl]oxy]-dimethylsilane (CAS No. 141'63'9) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Vinyltrimethoxysilane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.33Ethenyl(trimethoxy)silane (CAS No. '02'7) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

n-Octyltriethoxysilane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.34Triethoxy(octyl)silane (CAS No. '75'1) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Dimethylbis(s-butylamino)silane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.35N-[(Butan-2-ylamino)-dimethylsilyl]butan-2-amine (CAS No. '98'1) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Aqueous solution of potassium methyl siliconate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.36Tripotassium; methyl(trioxido)silane in aqueous solution (CAS No. '24'1) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Octyltrimethoxysilane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.37Trimethoxy(2,4,4-trimethylpentyl)silane (CAS No. '03'7) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Octlytriethoxysilane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.38Triethoxy(2,4,4-trimethylpentyl)silane (CAS No. '21'3) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Amino-propyl-triethoxysilane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.393-Triethoxysilylpropan-1-amine (CAS No. 919'30'2) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Methyltris(sec-butylamino)silane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.40N-[Bis(butan-2-ylamino)-methylsilyl]butan-2-amine (CAS No. '65'7) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Methyltris(methylethylketoximino)silane (MOS)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.41(E)-N-[Bis[[(E)-butan-2-ylideneamino]oxy]-methylsilyl]oxybutan-2-imine (CAS No. '54'9) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Heptamethyltrisiloxane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.42Methyl-bis(trimethylsilyloxy)silicon (CAS No. '88'7) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Tetramethyldisiloxane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.431,1,3,3-Tetramethyldisiloxane (CAS No. '26'7) (provided for in subheading .90.90)1%No changeNo changeOn or before 12/31/

.

.

Dimethylchlorosilane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.44Chloro(dimethyl)silicon (CAS No. '35'9) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Dichloromethylsilane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.45Dichloromethylsilane (CAS No. 75'54'7) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Tris(TFP)-methylcyclo-trisiloxane DR

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.462,4,6-Trimethyl-2,4,6-tris(3,3,3-trifluoropropyl)-1,3,5,2,4,6-trioxatrisilinane (CAS No. '14'3) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Tetravinyltetramethylcyclotetrasiloxane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.472,4,6,8-Tetrakis(ethenyl)-2,4,6,8-tetramethyl-1,3,5,7,2,4,6,8-tetraoxatetrasilocane (CAS No. '06'5) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Divinyltetramethyldisiloxane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.48Ethenyl-[ethenyl(dimethyl)silyl]oxy-dimethylsilane (CAS No. '95'4) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Input for plant protection agent

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.49Cyclopropanol, 2-(butyldimethylsilyl)-1-methyl-, 1-metanasulfonate (CAS No. '86'6) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Strawberry furanone

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.504-Hydroxy-2,5-dimethylfuran-3-one (CAS No. '77'3) (provided for in subheading .19.51)FreeNo changeNo changeOn or before 12/31/

.

.

Emamectin benzoate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.51(4"R)-4"-Deoxy-4"-(methylamino)avermectin b1 benzoate (CAS No. '91'8) (provided for in subheading .20.10)5.3%No changeNo changeOn or before 12/31/

.

.

Gibberellic acid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.52(1R,2R,5S,8S,9S, 10R,11S,12S)-5,12-Dihydroxy-11-methyl-6-methylidene-16-oxo-15-oxapentacyclo [9.3.2.15,8.01,10.02,8] heptadec-13-ene-9-carboxylic acid (Gibberellic acid) (CAS No. 77'06'5) (provided for in subheading .20.50)1.9%No changeNo changeOn or before 12/31/

.

.

Rose oxide

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.534-Methyl-2-(2-methylprop-1-enyl)oxane (CAS No. '43'1) (provided for in subheading .99.90)FreeNo changeNo changeOn or before 12/31/

.

.

Vinylene carbonate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.541,3-Dioxol-2-one (CAS No. 872'36'6) (provided for in subheading .99.90)0.5%No changeNo changeOn or before 12/31/

.

.

Kasugamycin technical

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.552-Amino-2-[(2R,3S,5S,6R)-5-amino-2-methyl-6-[(2S,3S,5S,6R)-2,3,4,5,6-pentahydroxycyclohexyl]oxyoxan-3-yl]iminoacetic acid;hydrochloride (CAS No. '46'9) (provided for in subheading .99.90)FreeNo changeNo changeOn or before 12/31/

.

.

2H-Cyclododeca[b]pyran

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.563,4,5,6,7,8,9,10,11,12,13,14-Dodecahydro-2H-cyclododeca[b]pyran (CAS No. '83'6) (provided for in subheading .99.90) 1%No changeNo changeOn or before 12/31/

.

.

Bixafen

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.57N-[2-(3,4-Dichlorophenyl)-4-fluorophenyl]-3-(difluoromethyl)-1-methylpyrazole-4-carboxamide (CAS No. '46'3) (provided for in subheading .19.23) 2.6%No changeNo changeOn or before 12/31/

.

.

Fluxapyroxad

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.583-(Difluoromethyl)-1-methyl-N-(3',4',5'-trifluorobiphe-nyl-2-yl)pyrazole-4-carboxamide (Fluxapyroxad) (CAS No. '31'3) (provided for in subheading .19.23) 5.7%No changeNo changeOn or before 12/31/

.

.

3,5 Dimethylpyrazole

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.593,5-Dimethyl-1H-pyrazole (CAS No. 67'51'6) (provided for in subheading .19.90) FreeNo changeNo changeOn or before 12/31/

.

.

Pyraclonil

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.601-(3-Chloro-4,5,6,7-tetrahydropyrazolo[1,5-a]pyridin-2-yl)-5-[methyl(prop-2-ynyl)amino]pyrazole-4-carbonitrile (Pyraclonil) (CAS No. '15'2) (provided for in subheading .19.90) FreeNo changeNo changeOn or before 12/31/

.

.

Imidazolidinyl urea

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.611-[3-(Hydroxymethyl)-2,5-dioxoimidazolidin-4-yl]-3-[[[3-(hydroxymethyl)-2,5-dioxoimidazolidin-4-yl] carbamoylamino]methyl]urea (CAS No. '46'9) (provided for in subheading .21.00) FreeNo changeNo changeOn or before 12/31/

.

.

Allantoin

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.62(2,5-Dioxoimidazolidin-4-yl)urea (CAS No. 97'59'6) (provided for in subheading .21.00) FreeNo changeNo changeOn or before 12/31/

.

.

Emulsifiable concentrate of Imazalil fungicide

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.63Mixtures of (1-[2-(allyloxy)-2-(2,4-dichlorophenyl)ethyl]-1H-imidazole) (Imazalil) (CAS No. '44'0) and application adjuvants (provided for in subheading .29.35) FreeNo changeNo changeOn or before 12/31/

.

.

Technical cyazofamid fungicide

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.644-Chloro-2-cyano-N,N-dimethyl-5-(4-methylphenyl)imidazole-1-sulfonamide (Cyazofamid) (CAS No. '88'3) (provided for in subheading .29.35) 3.1%No changeNo changeOn or before 12/31/

.

.

Imazalil sulfate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.651-[2-(2,4-Dichlorophenyl)-2-(prop-2-en-1-yloxy)ethyl]-1H-imidazole sulfate (Imazalil sulfate) (CAS No. '72'2) (provided for in subheading .29.35) FreeNo changeNo changeOn or before 12/31/

.

.

1,2-Dimethylimidazole

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.661,2-Dimethylimidazole (CAS No. '84'0) (provided for in subheading .29.90) FreeNo changeNo changeOn or before 12/31/

.

.

2-Methylimidazole flakes

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.672-Methyl-1H-imidazole (CAS No. 693'98'1) (provided for in subheading .29.90) FreeNo changeNo changeOn or before 12/31/

.

.

Diazolidinyl urea

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.681-[1,3-Bis(hydroxymethyl)-2,5-dioxoimidazolidin-4-yl]-1,3-bis(hydroxymethyl)urea (CAS No. '02'8) (provided for in subheading .29.90) FreeNo changeNo changeOn or before 12/31/

.

.

1-(2-Aminoethyl)imidazolidin-2-one (AEEU)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.691-(2-Aminoethyl)imidazolidin-2-one (CAS No. '42'1) (provided for in subheading .29.90) FreeNo changeNo changeOn or before 12/31/

.

.

Zinc pyrithione

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.70Zinc;1-oxidopyridin-1-ium-2-thiolate (CAS No. '41'7) (provided for in subheading .39.21) FreeNo changeNo changeOn or before 12/31/

.

.

Technical Pyriofenone fungicide

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.71(5-Chloro-2-methoxy-4-methyl-3-pyridyl)(4,5,6-trimethoxy-o-tolyl)methanone (Pyriofenone) (CAS No. '61'9) (provided for in subheading .39.21) FreeNo changeNo changeOn or before 12/31/

.

.

Picoxystrobin

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.72Methyl (E)-3-methoxy-2-[2-[[6-(trifluoromethyl)pyridin-2-yl]oxymethyl]phenyl]prop-2-enoate (Picoxystrobin) (CAS No. '22'5) (provided for in subheading .39.21) 5.2%No changeNo changeOn or before 12/31/

.

.

Triclopyr BEE

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.732-Butoxyethyl 2-(3,5,6-trichloropyridin-2-yl)oxyacetate (CAS No. '56'7) (provided for in subheading .39.25) 1.6%No changeNo changeOn or before 12/31/

.

.

Imazapyr

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.742-(4-Methyl-5-oxo-4-propan-2-yl-1H-imidazol-2-yl)pyridine-3-carboxylic acid (Imazapyr) (CAS No. '34'1) (provided for in subheading .39.25) FreeNo changeNo changeOn or before 12/31/

.

.

Tetraniliprole

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.752-(3-Chloropyridin-2-yl)-N-[4-cyano-2-methyl-6-(methylcarbamoyl)phenyl]-5-[[5-(trifluoromethyl)tetrazol-2-yl]methyl]pyrazole-3-carboxamide (CAS No. '66'3) (provided for in subheading .39.27) FreeNo changeNo changeOn or before 12/31/

.

.

Cyantraniliprole

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.765-Bromo-2-(3-chloropyridin-2-yl)-N-[4-cyano-2-methyl-6-(methylcarbamoyl)phenyl]pyrazole-3-carboxamide (Cyantraniliprole) (CAS No. '63'1) (provided for in subheading .39.27) 3.1%No changeNo changeOn or before 12/31/

.

.

Chlorantraniliprole

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.775-Bromo-N-[4-chloro-2-methyl-6-(methylcarbamoyl)phenyl]-2-(3-chloropyridin-2-yl)pyrazole-3-carboxamide (Chlorantraniliprole) (CAS No. '45'7) (provided for in subheading .39.27)4.8%No changeNo changeOn or before 12/31/

.

.

Chlorpyrifos

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.78O,O-Diethyl O-3,5,6-trichloropyridin-2-yl phosphorothioate (Chlorpyrifos) (CAS No. '88'2) (provided for in subheading .39.27) FreeNo changeNo changeOn or before 12/31/

.

.

Technical Cyclaniliprole insecticide

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.793-Bromo-N-[2-bromo-4-chloro-6-[[(1-cyclo- propylethyl)amino]carbonyl]phenyl]-1-(3-chloro-2- pyridinyl)-1H-pyrazole-5-carboxamide (Cyclaniliprole) (CAS No. '98'5) (provided for in subheading .39.27) FreeNo changeNo changeOn or before 12/31/

.

.

Regorafenib

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.804-[4-[[4-Chloro-3-(trifluoromethyl)phenyl]carbamoylamino]-3-fluorophenoxy]-N-methylpyridine-2-carboxamide monohydrate (Regorafenib) (CAS No. '88'2) (provided for in subheading .39.41) FreeNo changeNo changeOn or before 12/31/

.

.

N-Butyl-TAD

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.81N-Butyl-2,2,6,6-tetramethylpiperidin-4-amine (CAS No. '92'1) (provided for in subheading .39.61) FreeNo changeNo changeOn or before 12/31/

.

.

Hindered amine light stabilizer and phenolic antioxidant

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.82Bis(1,2,2,6,6-pentamethylpiperidin-4-yl) 2-butyl-2-[(3,5-ditert-butyl-4-hydroxyphenyl)methyl]propanedioate (CAS No. '89'0) (provided for in subheading .39.61) FreeNo changeNo changeOn or before 12/31/

.

.

4-Hydroxy-TEMPO

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.834-Hydroxy-2,2,6,6-tetramethylpiperidinoxyl (CAS No. '96'2) (provided for in subheading .39.61) FreeNo changeNo changeOn or before 12/31/

.

.

2,2,6,6-tetramethylpiperidin-4-ol (TMP)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.842,2,6,6-Tetramethylpiperidin-4-ol (CAS No. '88'5) (provided for in subheading .39.61) FreeNo changeNo changeOn or before 12/31/

.

.

5-Bromo-2-(3-chloropyridin-2-yl)pyrazole-3-carboxylic acid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.855-Bromo-2-(3-chloropyridin-2-yl)pyrazole-3-carboxylic acid (CAS No. '86'9) (provided for in subheading .39.61) 6.4%No changeNo changeOn or before 12/31/

.

.

2-Chloro-5-(trifluoromethyl)pyridine

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.862-Chloro-5-(trifluoromethyl)pyridine (CAS No. '81'3) (provided for in subheading .39.61) FreeNo changeNo changeOn or before 12/31/

.

.

Picarbutrox

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.87Tert-butyl N-[6-[[(Z)-[(1-methyltetrazol-5-yl)-phenylmethylidene]amino]oxymethyl]pyridin-2-yl]carbamate (CAS No. '04'5) (provided for in subheading .39.61) FreeNo changeNo changeOn or before 12/31/

.

.

5-amino-3-(trifluromethyl) picolinonitrile (T)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.885-Amino-3-(trifluoromethyl)pyridine-2-carbonitrile (T) (CAS No. '62'6) (provided for in subheading .39.61) 3.5%No changeNo changeOn or before 12/31/

.

.

Dextromethorphan hydrobromide

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.89Dextromethorphan hydrobromide (monohydrate (CAS No. '34'1) or anhydrous (CAS No. 125'69'9)) (provided for in subheading .49.26) FreeNo changeNo changeOn or before 12/31/

.

.

Ipflufenoquin

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.902-[2-(7,8-Difluoro-2-methylquinolin-3-yl)oxy-6-fluorophenyl]propan-2-ol (CAS No. '27'9) (provided for in subheading .49.30) FreeNo changeNo changeOn or before 12/31/

.

.

THQ

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.911,2,3,4-Tetrahydroquinoline (CAS No. 635'46'1) (provided for in subheading .49.70) FreeNo changeNo changeOn or before 12/31/

.

.

Pyrithiobac sodium

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.92Sodium 2-chloro-6-(4,6-dimethoxypyrimidin-2-yl)sulfanylbenzoate (CAS No. '16'8) (provided for in subheading .59.10) FreeNo changeNo changeOn or before 12/31/

.

.

Larotrectinib sulfate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.93(3S)-N-[5-[(2R)-2-(2,5-Difluorophenyl)pyrrolidin-1-yl]pyrazolo[1,5-a]pyrimidin-3-yl]-3-hydroxypyrrolidine-1-carboxamide sulfuric acid (Larotrectinib sulfate) (CAS No. '08'0) (provided for in subheading .59.53) FreeNo changeNo changeOn or before 12/31/

.

.

Ibrutinib

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.941-[(3R)-3-[4-Amino-3-(4-phenoxyphenyl)pyrazolo[3,4-d]pyrimidin-1-yl]piperidin-1-yl]prop-2-en-1-one (Ibrutinib) (CAS No. '96'1) (provided for in subheading .59.53) 5.1%No changeNo changeOn or before 12/31/

.

.

Orthosulfamuron

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.951-(4,6-Dimethoxypyrimidin-2-yl)-3-[2-(dimethylcarbamoyl)phenylsulfamoyl]urea (Orthosulfamuron) (CAS No. '77'8) (provided for in subheading .59.95) FreeNo changeNo changeOn or before 12/31/

.

.

5-Bromopyrimidine

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.965-Bromopyrimidine (CAS No. '59'9) (provided for in subheading .59.95) FreeNo changeNo changeOn or before 12/31/

.

.

Butylthion

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.974-Amino-6-tert-butyl-3-sulfanylidene-2H-1,2,4-triazin-5-one (Butylthion) (CAS No. '43'2) (provided for in subheading .69.60) 1%No changeNo changeOn or before 12/31/

.

.

P-

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.984-[4,6-Bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl]benzene-1,3-diol (P-) (CAS No. '53'7) (provided for in subheading .69.60) FreeNo changeNo changeOn or before 12/31/

.

.

Carfentrazone Technical

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.21.99Ethyl 2-chloro-3-[2-chloro-5-[4-(difluoromethyl)-3-methyl-5-oxo-1,2,4-triazol-1-yl]-4-fluorophenyl]propanoate (Carfentrazone-ethyl) (CAS No. '02'1) (provided for in subheading .99.22) 3.3%No changeNo changeOn or before 12/31/

.

.

UV absorber 928

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.01 2-(Benzotriazol-2-yl)-6-(2-phenylpropan-2-yl)-4-(2,4,4-trimethylpentan-2-yl)phenol (CAS No. '91'1) (provided for in subheading .99.79) FreeNo changeNo changeOn or before 12/31/

.

.

UV absorber for industrial coatings

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.02 Methyl 3-[3-(benzotriazol-2-yl)-5-tert-butyl-4-hydroxyphenyl]propanoate (CAS No. '33'7) (provided for in subheading .99.79) FreeNo changeNo changeOn or before 12/31/

.

.

Uniconazole-P

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.03(4Z)-5-(4-Chlorophenyl)-2,2-dimethyl-4-(1H-1,2,4-triazol-1-yl)-4-hexen-3-ol (Uniconazole-P) (CAS No. '17'4) (provided for in subheading .99.79) FreeNo changeNo changeOn or before 12/31/

.

.

VcMMAE

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.04[4-[[(2S)-5-(Carbamoylamino)-2-[[(2S)-2-[6-(2,5-dioxopyrrol-1-yl)hexanoylamino]-3-methylbutanoyl]amino] pentanoyl]amino]phenyl]methyl N-[(2S)-1-[[(2S)-1-[[(3R,4S,5S)-1-[(2S)-2-[(1R,2R)-3-[[(1S,2R)-1-hydroxy-1-phenylpropan-2-yl]amino]-1-methoxy-2-methyl-3-oxopropyl]pyrrolidin-1-yl]-3-methoxy-5-methyl-1-oxoheptan-4-yl]-methylamino]-3-methyl-1-oxobutan-2-yl]amino]-3-methyl-1-oxobutan-2-yl]-N-methylcarbamate (CAS No. '53'6) (provided for in subheading .99.79)FreeNo changeNo changeOn or before 12/31/

.

.

UVA 360

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.052-(Benzotriazol-2-yl)-6-[[3-(benzotriazol-2-yl)-2-hydroxy-5-(2,4,4-trimethylpentan-2-yl)phenyl]methyl]-4-(2,4,4-trimethylpentan-2-yl)phenol (CAS No. '45'1) (provided for in subheading .99.79) FreeNo changeNo changeOn or before 12/31/

.

.

Trofinetide

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.06(2S)-2-[[(2S)-1-(2-Aminoacetyl)-2-methylpyrrolidine-2-carbonyl]amino]pentanedioic acid (Trofinetide) (CAS No. '76'7) (provided for in subheading .99.90) FreeNo changeNo changeOn or before 12/31/

.

.

Flurazole

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.07Benzyl 2-chloro-4-(trifluoromethyl)-1,3-thiazole-5-carboxylate (CAS No. '64'7) (provided for in subheading .10.10) FreeNo changeNo changeOn or before 12/31/

.

.

Oxathiapiprolin

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.081-(4-{4-[5-(2,6-Difluorophenyl)-4,5-dihydro-1,2-oxazol-3-yl]-1,3-thiazol-2-yl}-1-piperidinyl)-2-[5-methyl-3-(trifluoromethyl)-1H-pyrazol-1-yl]ethanone (Oxathiapiprolin) (CAS No. '67'9) (provided for in subheading .10.10) 5.5%No changeNo changeOn or before 12/31/

.

.

Certain antimicrobial

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.092-Methyl-1,2-thiazol-3-one (CAS No. '20'4) (provided for in subheading .10.90) FreeNo changeNo changeOn or before 12/31/

.

.

Rubber accelerator

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.102-(1,3-Benzothiazol-2-yldisulfanyl)-1,3-benzothiazole (CAS No. 120'78'5) (provided for in subheading .20.10) 2.5%No changeNo changeOn or before 12/31/

.

.

2-Amino benzothiazole

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.111,3-Benzothiazol-2-amine (CAS No. 136'95'8) (provided for in subheading .20.80) FreeNo changeNo changeOn or before 12/31/

.

.

Technical Isofetamid fungicide

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.123-Methyl-N-[2-methyl-1-(2-methyl-4-propan-2-yloxyphenyl)-1-oxopropan-2-yl]thiophene-2-carboxamide (Isofetamid) (CAS No. '78'9) (provided for in subheading .99.12) FreeNo changeNo changeOn or before 12/31/

.

.

Clomazone Technical

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.132-[(2-Chlorophenyl)methyl]-4,4-dimethyl-1,2-oxazolidin-3-one (Clomazone) (CAS No. '89'1) (provided for in subheading .99.15) 5.5%No changeNo changeOn or before 12/31/

.

.

NEM salt

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.144-(4-Methylphenyl)-4-oxobutanoic acid-4-ethylmorpholine (2:1) (CAS No. '89'0) (provided for in subheading .99.39) FreeNo changeNo changeOn or before 12/31/

.

.

AMTC wet cake

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.155-Amino-3-methylthiophene-2,4-dicarbonitrile (CAS No. '48'2) (provided for in subheading .99.39) FreeNo changeNo changeOn or before 12/31/

.

.

Photoinitiator 369

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.162-Benzyl-2-(dimethylamino)-1-(4-morpholin-4-ylphenyl)butan-1-one (CAS No. '12'1) (provided for in subheading .99.39) FreeNo changeNo changeOn or before 12/31/

.

.

Isatoic anhydride

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.172H-3,1-Benzoxazine-2,4(1H)-dione (Isatoic anhydride) (CAS No. 118'48'9) (provided for in subheading .99.44) FreeNo changeNo changeOn or before 12/31/

.

.

Oclacitinib maleate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.18(Z)-But-2-enedioic acid; N-methyl-1-[4-[methyl(7H-pyrrolo[2,3-d]pyrimidin-4-yl)amino]cyclohexyl] methanesulfonamide (CAS No. '27'0) (provided for in subheading .90.60) 5.2%No changeNo changeOn or before 12/31/

.

.

Thiencarbazone-methyl

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.19Methyl 4-[(3-methoxy-4-methyl-5-oxo-1,2,4-triazole-1-carbonyl)sulfamoyl]-5-methylthiophene-3-carboxylate (Thiencarbazone-methyl) (CAS No. '83'1) (provided for in subheading .90.75) FreeNo changeNo changeOn or before 12/31/

.

.

Penoxsulam technical herbicide

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.202-(2,2-Difluoroethoxy)-N-(5,8-dimethoxy-[1,2,4]triazolo[1,5-c]pyrimidin-2-yl)-6-(trifluoromethyl)benzenesulfonamide (Penoxsulam) (CAS No. '96'2) (provided for in subheading .90.75) FreeNo changeNo changeOn or before 12/31/

.

.

Ethyl 2-sulfamoylbenzoate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.21Ethyl 2-(Aminosulfonyl)benzoate (CAS No. '72'9) (provided for in subheading .90.75) FreeNo changeNo changeOn or before 12/31/

.

.

Sulfosulfuron

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.221-(4,6-Dimethoxypyrimidin-2-yl)-3-(2-ethylsulfonylimidazo[1,2-a]pyridin-3-yl)sulfonylurea (Sulfosulfuron) (CAS No. '32'1) (provided for in subheading .90.75) FreeNo changeNo changeOn or before 12/31/

.

.

Pyrimisulfan

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.23(RS)-2'-[(4,6-dimethoxypyrimidin-2-yl)(hydroxy)methyl]-1,1-difluoro-6'-(methoxymethyl)methanesulfonanilide (Pyrimisulfan) (CAS No. '90'9) (provided for in subheading .90.95) FreeNo changeNo changeOn or before 12/31/

.

.

Purified steviol glycoside, rebaudioside A

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.24Purified steviol glycosides, containing not less than 95 percent by weight rebaudioside A (19-O-ß-glucopyranosyl-13-O-(ß-glucopyranosyl(1-2)-ß-glucopyranosyl(1-3))-ß-glucopyranosyl-13-hydroxykaur-16-en-19-oic acid) (CAS No. '16'1) (provided for in subheading .90.00) 2.5%No changeNo changeOn or before 12/31/

.

.

Glucosylated steviol glycosides

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.-[(2-O-β-D-Glucopyranosyl-α-D-glucopyranosyl)oxy]kaur-16-en-18-oic acid β-D-glucopyranosyl ester (Stevioside) (CAS No. '89'7) (provided for in subheading .90.00) FreeNo changeNo changeOn or before 12/31/

.

.

Hydroxypropyl gamma cyclodextrin

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.26(2-Hydroxypropyl)-γ-cyclodextrin (hydroxypropylated γ-cyclodextrin) (CAS No. '34'4) (provided for in subheading .00.60)FreeNo changeNo changeOn or before 12/31/

.

.

Hydroxypropylated beta cyclodextrin

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.272-Hydroxypropyl-β-cyclodextrin (CAS No. '35'5) (provided for in subheading .00.60)1%No changeNo changeOn or before 12/31/

.

.

Methyl beta cyclodextrin

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.28Methyl β-cyclodextrin (CAS No. '36'6) (provided for in subheading .00.60)FreeNo changeNo changeOn or before 12/31/

.

.

2'-Fucosyllactose

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.29(2R,3R,4R,5R)-4-[(2S,3R,4S,5R,6R)-4,5-Dihydroxy-6-(hydroxymethyl)-3-[(2S,3S,4R,5S,6S)-3,4,5-trihydroxy-6-methyloxan-2-yl]oxyoxan-2-yl]oxy-2,3,5,6-tetrahydroxyhexanal (2'-Fucosyllactose) (CAS No. '94'9) (provided for in subheading .00.60)FreeNo changeNo changeOn or before 12/31/

.

.

Ascorbyl glucoside

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.30(2R)-2-[(1S)-1,2-Dihydroxyethyl]-3-hydroxy-4-[(2R,3R,4S,5S,6R)-3,4,5-trihydroxy-6-(hydroxymethyl)oxan-2-yl]oxy-2H-furan-5-one (Ascorbyl glucoside) (CAS No. '78'1) (provided for in subheading .00.60)FreeNo changeNo changeOn or before 12/31/

.

.

Dimethylamine borane (DMAB)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.31N-Methylmethanamine-borane (1:1) (CAS No. 74'94'2) (provided for in subheading .00.50)FreeNo changeNo changeOn or before 12/31/

.

.

Elderberry extract concentrate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.32Elderberry extract concentrate (CAS No. '58'7) (provided for in subheading .00.80)FreeNo changeNo changeOn or before 12/31/

.

.

Disperse Yellow 241

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.33Disperse Yellow 241 (5-[(3,4-Dichlorophenyl)diazenyl]-2-hydroxy-1,4-dimethyl-6-oxopyridine-3-carbonitrile) (CAS No. '52'9) (provided for in subheading .11.35)FreeNo changeNo changeOn or before 12/31/

.

.

Disperse Orange

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.34Disperse Orange (Acetic acid, cyano-[3-[(6-methoxy-2-benzothiazoyl)amino]-1H-isoindol-1-ylidene}-, pentyl ester) (CAS No. '74'0) (provided for in subheading .11.35)FreeNo changeNo changeOn or before 12/31/

.

.

Mixtures of Disperse Yellow FD and acetic acid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.35Mixtures of Disperse Yellow FD (acetic acid, 2-[3-(2-benzothiazolylamino)-1H-isoindol-1-ylidene]-2-cyano-, butyl ester (CAS No. -73-9)) and acetic acid, [3-(2-benzothiazolylamino)-1H-isoindol-1-ylidene]cyano-, 2-butoxyethyl ester (CAS No. '94'4) (provided for in subheading .11.35)FreeNo changeNo changeOn or before 12/31/

.

.

Disperse Blue 54

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.36Disperse Blue 54 (1-Anilino-4,8-dihydroxy-5-nitroanthracene-9,10-dione) (CAS No. '97'7) (provided for in subheading .11.35)FreeNo changeNo changeOn or before 12/31/

.

.

Mixtures of several disperse dyes

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.37Mixtures of 9,10-anthracenedione, 1,5(or 1,8)-dihydroxy-4-nitro-8(or 5)-(phenylamino)- (Disperse Blue 54 and 77) (CAS No. '97'7); 1,5(or 1,8)-diamino-2-bromo-4,8(or 4,5)-dihydroxy-9,10-anthracenedione (Disperse Blue 81 (mixture of isomers)) (CAS No. '65'6); reaction products of 3-pyridinecarbonitrile, 5-[2-(2-cyano-4-nitrophenyl)diazenyl]-2-[[2-(2-hydroxyethoxy)ethyl]amino]-4-methyl-6-(phenylamino)- (Disperse Red A) (CAS No. '44'3) and 3-pyridinecarbonitrile, 5-[2-(2-cyano-4-nitrophenyl)diazenyl]-6-[[2-(2-hydroxyethoxy)ethyl]amino]-4-methyl-2-(phenylamino)- (Disperse Red T-) (CAS No. '29'6); 4-[(5-cyano-6-hydroxy-1,4-dimethyl-2-oxopyridin-3-yl)diazenyl]-N-(2-ethylhexyl)benzamide (Disperse Yellow 198) (CAS No. '81'1); 4,11-diamino-2-(3-methoxypropyl)naphtho[2,3-f]isoindole-1,3,5,10-tetrone (Disperse Blue 60 (M)) (CAS No. '80'0); and 4,11-diamino-2-[3-(2-methoxyethoxy)propyl]naphtho[2,3-f]isoindole-1,3,5,10-tetrone (Disperse Blue 60 (ME)) (CAS No. '45'2) (provided for in subheading .11.35)FreeNo changeNo changeOn or before 12/31/

.

.

Mixtures of 4 disperse blue dyes

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.38Disperse dye mixtures of Disperse Blue 77 (1-anilino-4,5-dihydroxy-8-nitroanthracene-9,10-dione) (CAS No. '76'3); Disperse Blue 60 (M) (4,11-diamino-2-(3-methoxypropyl)naphtho[2,3-f]isoindole-1,3,5,10-tetrone) (CAS No. '80'0); Disperse Blue 60 (ME) (4,11-diamino-2-[3-(2-methoxyethoxy)propyl]-1H-naphth[2,3-f]isoindole-1,3,5,10(2H)-tetrone) (CAS No. '45'2) and Disperse Blue 77/54 (1,8- and 1,5-Isomers) (1-anilino-4,8-dihydroxy-5-nitroanthracene-9,10-dione) (CAS No. '97'7) (provided for in subheading .11.35)FreeNo changeNo changeOn or before 12/31/

.

.

Mixtures of 4 dyes

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.39Disperse dye mixtures of Solvent Yellow 163 (1,8-bis(phenylsulfanyl) anthracene-9,10-dione) (CAS No. '91'0); Disperse Yellow FD (acetic acid, 2-[3-(2-benzothiazolylamino)-1H-isoindol-1-ylidene]-2-cyano-, butyl ester) (CAS No. '73'9)); acetic acid, [3-(2-benzothiazolylamino)-1H-isoindol-1-ylidene]cyano-, 2-butoxyethyl ester (CAS No. '94'4); Disperse Orange FC (acetic acid, 2-cyano-2-[3-[(6-methoxy-2-benzothiazolyl)amino]-1H-isoindol-1-ylidene]-, pentyl ester) (CAS No. '74'0) and Disperse Yellow 163 (3-[N-(2-cyanoethyl)-4-[(2,6-dichloro-4-nitrophenyl)diazenyl]anilino] propanenitrile) (CAS No. '43'7) (provided for in subheading .11.35)FreeNo changeNo changeOn or before 12/31/

.

.

Disperse Red 86

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.40Disperse Red 86 (N-(4-Amino-3-methoxy-9,10-dioxoanthracen-1-yl)-4-methylbenzenesulfonamide) (CAS No. 81'68'5) (provided for in subheading .11.50)FreeNo changeNo changeOn or before 12/31/

.

.

Disperse Violet 1

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.41Disperse Violet 1 (1,4-Diaminoanthracene-9,10-dione) (CAS No. 128'95'0) (provided for in subheading .11.50)FreeNo changeNo changeOn or before 12/31/

.

.

Disperse Blue 60

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.42Disperse Blue 60 (4,11-Diamino-2-(3-methoxy-propyl)-naphtho[2,3-f]isoindole-1,3,5,10-tetraone) (CAS No. '80'0) (provided for in subheading .11.50)FreeNo changeNo changeOn or before 12/31/

.

.

Mixtures of Disperse Orange 29, Disperse Red 167:1, and Disperse Blue 56

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.43Disperse dye mixtures of Disperse Orange 29 (4-[[2-methoxy-4-[(4-nitrophenyl) diazenyl]phenyl] diazenyl]phenol) (CAS No. '42'1); Disperse Red 167:1 (2-[3-acetamido-N-(2-acetyloxyethyl)-4-[(2-chloro-4-nitrophenyl)diazenyl] anilino]ethyl acetate) (CAS No. '78'4); Disperse Blue 56 (1,8-diamino-2-bromo-4,5-dihydroxyanthracene-9,10-dione) (CAS No. '65'6) and acetic acid, 2-[3-(2-benzothiazolylamino)-1H-isoindol-1-ylidene]-2-cyano-, 2-butoxyethyl ester (CAS No. '94'4) (provided for in subheading .11.50)FreeNo changeNo changeOn or before 12/31/

.

.

Disperse Yellow 54

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.44Disperse Yellow 54 (3-Hydroxy-2-(3-hydroxyquinolin-2-yl)inden-1-one) (CAS No. '51'9) (provided for in subheading .11.50)FreeNo changeNo changeOn or before 12/31/

.

.

Acid Violet 48

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.45Acid Violet 48 (Disodium 3-[[4-amino-9,10-dioxo-3-[2-sulfonato-4-(2,4,4-trimethylpentan-2-yl)phenoxy]anthracen-1-yl]amino]-2,4,6-trimethylbenzenesulfonate) (CAS No. '51'8) (provided for in subheading .12.17)FreeNo changeNo changeOn or before 12/31/

.

.

Acid Blue 280

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.46Acid Blue 280 (Sodium 2-[[4-(cyclohexylamino)-9,10-dioxoanthracen-1-yl]amino]-5-ethoxybenzenesulfonate) (CAS No. '62'0) (provided for in subheading .12.20)FreeNo changeNo changeOn or before 12/31/

.

.

Acid Brown 282

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.47Acid Brown 282 (Disodium;chromium(3+);5-methyl-4-[(5-nitro-2-oxidophenyl)diazenyl]-2-phenylpyrazol-3-olate;[7-nitro-3-oxido-4-[(2-oxido-1,4-dihydronaphthalen-1-yl)diazenyl]naphthalen-1-yl] sulfate) (CAS No. '60'1) (provided for in subheading .12.20)FreeNo changeNo changeOn or before 12/31/

.

.

Acid Red 131

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.48Acid Red 131 (CAS No. '99'0) (provided for in subheading .12.20)FreeNo changeNo changeOn or before 12/31/

.

.

Acid Red 249

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.49Acid Red 249 (Disodium 3-[(5-chloro-2-phenoxyphenyl)diazenyl]-4-hydroxy-5-[(4-methylphenyl)sulfonylamino]naphthalene-2,7-disulfonate) (CAS No. '66'6) (provided for in subheading .12.20)FreeNo changeNo changeOn or before 12/31/

.

.

Acid Yellow 236

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.50Acid Yellow 236 (CAS No. '21'2) (provided for in subheading .12.45)FreeNo changeNo changeOn or before 12/31/

.

.

Acid Red 407

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.51Acid Red 407 (CAS No. '68'6) (provided for in subheading .12.45)FreeNo changeNo changeOn or before 12/31/

.

.

Acid Yellow 220

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.52Acid Yellow 220 (tetrasodium;2-[[3-[[(Z)-1-(2-chloroanilino)-3-oxido-1-oxobut-2-en-2-yl]diazenyl]-4-oxidophenyl]sulfonylamino]benzoate; cobalt(2+)) (CAS No. '34'2) (provided for in subheading .12.45)FreeNo changeNo changeOn or before 12/31/

.

.

Acid Yellow 232

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.53Acid Yellow 232 (Chromium, 2-[2-(4,5-dihydro-3-methyl-5-oxo-1-phenyl-1H-pyrazol-4-yl)diazenyl]benzoate 2-[2-(4,5-dihydro-3-methyl-5-oxo-1-phenyl-1H-pyrazol-4-yl)diazenyl]-5-sulfobenzoate lithium sodium complexes) (CAS No. '89'3) (provided for in subheading .12.45)FreeNo changeNo changeOn or before 12/31/

.

.

Acid Yellow 235

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.54Acid Yellow 235 (CAS No. '54'9) (provided for in subheading .12.45)FreeNo changeNo changeOn or before 12/31/

.

.

Acid Yellow 151

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.55Acid Yellow 151 (Sodium; 2-[[(Z)-1-anilino-3-oxido-1-oxobut-2-en-2-yl]diazenyl]-4-sulfamoylphenolate; cobalt(3+)) (CAS No. '88'9) (provided for in subheading .12.45)FreeNo changeNo changeOn or before 12/31/

.

.

Acid Violet 43

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.56Acid Violet 43 (Sodium 2-[(4-hydroxy-9,10-dioxoanthracen-1-yl)amino]-5-methylbenzenesulfonate) (CAS No. '18'6) (provided for in subheading .12.50)FreeNo changeNo changeOn or before 12/31/

.

.

Acid Red 33

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.57Acid Red 33 (Disodium;5-amino-4-hydroxy-3-phenyldiazenylnaphthalene-2,7-disulfonate) (CAS No. '66'6) (provided for in subheading .12.50)FreeNo changeNo changeOn or before 12/31/

.

.

Acid Black 52

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.58Acid Black 52 (Trisodium;chromium;3-hydroxy-4-[(2-hydroxynaphthalen-1-yl)diazenyl]-7-nitronaphthalene-1-sulfonate) (CAS No. '64'0) (provided for in subheading .12.50)FreeNo changeNo changeOn or before 12/31/

.

.

Acid Black 2

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.59Acid Black 2 (Disodium 4-amino-5-hydroxy-3-[(E)-(4-nitrophenyl)diazenyl]-6-[(E)-phenyldiazenyl]-2,7-naphthalenedisulfonate) (CAS No. '03'6) (provided for in subheading .12.50)FreeNo changeNo changeOn or before 12/31/

.

.

Acid Green 25

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.60Acid Green 25 (Disodium;5-methyl-2-[[4-(4-methyl-2-sulfonatoanilino)-9,10-dioxoanthracen-1-yl]amino]benzenesulfonate) (CAS No. '90'1) (provided for in subheading .12.50)FreeNo changeNo changeOn or before 12/31/

.

.

Basic Brown 23

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.61Basic Brown 23 (CAS No. '48'8) (provided for in subheading .13.60)FreeNo changeNo changeOn or before 12/31/

.

.

Basic Violet 11:1 rhodamine dye

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.62Basic Violet 11:1 (Bis{6-(diethylamino)-N,N-diethyl-9-[2-(methoxycarbonyl) phenyl]-3H-xanthen-3-iminium} tetrachlorozincate(2-)) (CAS No. '89'7) (CIN ) (provided for in subheading .13.60) FreeNo changeNo changeOn or before 12/31/

.

.

Basic Yellow 37

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.63Basic Yellow 37 (4-[4-(diethylamino)benzenecarboximidoyl]-N,N-diethylaniline; hydrochloride) (CAS No. '36'7) (provided for in subheading .13.80)FreeNo changeNo changeOn or before 12/31/

.

.

Basic Violet 3

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.64Basic Violet 3 ([4-[bis[4-(dimethylamino)phenyl] methylidene]cyclohexa-2,5-dien-1-ylidene]-dimethylazanium;chloride) (CAS No. 548'62'9) (provided for in subheading .13.80)FreeNo changeNo changeOn or before 12/31/

.

.

Direct Orange 118

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.65Direct Orange 118 (Tetrasodium 7,7'-(carbonyldiimino)bis{4-hydroxy-3-[(E)-(2-methyl-4-sulfonatophenyl)diazenyl]-2-naphthalenesulfonate}) (CAS No. '33'4) (provided for in subheading .14.20)FreeNo changeNo changeOn or before 12/31/

.

.

Direct Blue 86

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.66Direct Blue 86 (Copper; disodium; 2,11,20,29, 38,40-hexaza-37,39-diazanidanonacyclo [28.6.1.13,10.112,19.121, 28.04,9.013,18.022, 27.031,36] tetraconta-1(36),2,4(9),5,7,10(40), 11,13,15,17,19,21(38), 22(27),23,25,28,30,32,34-nonadecaene-6,24-disulfonate) (CAS No. '38'7) (provided for in subheading .14.25)FreeNo changeNo changeOn or before 12/31/

.

.

Direct Blue 199

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.67Direct Blue 199 (Copper, [29H,31H-phthalocyaninato(2-)-κN29,κN30,κN31,κN32]-, aminosulfonyl sulfo derivatives, sodium salts) (CAS No. '11'7) (provided for in subheading .14.30)FreeNo changeNo changeOn or before 12/31/

.

.

Direct Black 168

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.68Direct Black 168 (Trisodium;2-[4-[(2-amino-4-oxidophenyl)diazenyl]anilino]-5-[(1-amino-8-oxido-7-phenyldiazenyl-3,6-disulfonaphthalen-2-yl)diazenyl]benzenesulfonate) (CAS No. '88'5) (provided for in subheading .14.30)FreeNo changeNo changeOn or before 12/31/

.

.

Direct Red 227

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.69Direct Red 227 (Hexasodium;4-hydroxy-5-[[4-[4-[(E)-2-[4-[[4-[(8-hydroxy-7-phenyldiazenyl-3,6-disulfonatonaphthalen-1-yl)amino]-6-morpholin-4-yl-1,3,5-triazin-2-yl]amino]-2-sulfonatophenyl]ethenyl]-3-sulfonatoanilino]-6-morpholin-4-yl-1,3,5-triazin-2-yl]amino]-3-phenyldiazenylnaphthalene-2,7-disulfonate) (CAS No. '81'0) (provided for in subheading .14.30)FreeNo changeNo changeOn or before 12/31/

.

.

Direct Yellow 107

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.70Direct Yellow 107 (3-[[3-Methoxy-4-[[2-methoxy-4-[(3-sulfophenyl)diazenyl] phenyl]carbamoylamino] phenyl]diazenyl] benzenesulfonic acid) (CAS No. '08'7) (provided for in subheading .14.30)FreeNo changeNo changeOn or before 12/31/

.

.

Direct Green 26

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.71Direct Green 26 (Pentasodium;5-[[4-[[4-anilino-6-[[8-hydroxy-7-[[4-[(8-hydroxy-3,6-disulfonatonaphthalen-1-yl)diazenyl]-2-methoxy-5-methylphenyl]diazenyl]-3,6-disulfonatonaphthalen-1-yl]amino]-1,3,5-triazin-2-yl]amino]phenyl]diazenyl]-2-hydroxybenzoate) (CAS No. '26'7) (provided for in subheading .14.50)FreeNo changeNo changeOn or before 12/31/

.

.

Direct Yellow 11

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.72Direct Yellow 11 (Disodium; 6-oxo-5-[(4-sulfonatophenyl)hydrazinylidene] naphthalene-2-sulfonate) (CAS No. '37'7) (provided for in subheading .14.50)FreeNo changeNo changeOn or before 12/31/

.

.

Direct Orange 15

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.73Direct Orange 15 (Sodium; (8Z,20Z)-2,3,14,15-tetrazapentacyclo [20.2.2.24,7.210,13.216,19] dotriaconta-1(24),2,4,6,8,10, 12,14,16,18,20, 22,25,27,29,31-hexadecaene-6,11,18,23-tetrasulfonic acid) (CAS No. '35'5) (provided for in subheading .14.50)FreeNo changeNo changeOn or before 12/31/

.

.

Direct Brown 44

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.74Direct Brown 44 (Disodium; 4-[[2,4-diamino-5-[[3-[[2,4-diamino-5-[(4-sulfonatophenyl) diazenyl]phenyl]diazenyl] phenyl]diazenyl]phenyl] diazenyl]benzenesulfonate) (CAS No. '62'6) (provided for in subheading .14.50)FreeNo changeNo changeOn or before 12/31/

.

.

Direct Red 81

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.75Direct Red 81 (Disodium;7-benzamido-4-hydroxy-3-[[4-[(4-sulfonatophenyl)diazenyl] phenyl]diazenyl]naphthalene-2-sulfonate) (CAS No. '11'9) (provided for in subheading .14.50)2%No changeNo changeOn or before 12/31/

.

.

Direct Yellow 142

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.76Direct Yellow 142 (CAS No. '08'4) (provided for in subheading .14.50)FreeNo changeNo changeOn or before 12/31/

.

.

Direct Red 80

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.77Direct Red 80 (hexasodium;4-hydroxy-7-[[5-hydroxy-7-sulfonato-6-[[2-sulfonato-4-[(4-sulfonatophenyl) diazenyl]phenyl]diazenyl] naphthalen-2-yl]carbamoylamino]-3-[[2-sulfonato-4-[(4-sulfonatophenyl)diazenyl] phenyl]diazenyl]naphthalene-2-sulfonate) (CAS No. '10'8) (provided for in subheading .14.50)FreeNo changeNo changeOn or before 12/31/

.

.

Direct Red 16

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.78Direct Red 16, disodium salt (disodium;7-amino-4-hydroxy-3-[(5-hydroxy-6-phenyldiazenyl-7-sulfonatonaphthalen-2-yl)diazenyl]naphthalene-2-sulfonate) (CAS No. '02'7) (provided for in subheading .14.50)FreeNo changeNo changeOn or before 12/31/

.

.

Direct Red 254

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.79Direct Red 254 (Disodium;7-amino-4-hydroxy-3-[[4-[(4-sulfonatophenyl)diazenyl] phenyl]diazenyl]naphthalene-2-sulfonate) (CAS No. '50'1) (provided for in subheading .14.50) FreeNo changeNo changeOn or before 12/31/

.

.

Colorant

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.80Copper, [μ-[[3,3'-[(1-oxido-1,2-diazenediyl)bis[[2-(hydroxy-κO)-4,1-phenylene]-2,1-diazenediyl-κN1]]bis[4-(hydroxy-κO)-2,7-naphthalenedisulfonato]](8-)]]di-, sodium (1:4) (CAS No. '68'1) (provided for in subheading .14.50)FreeNo changeNo changeOn or before 12/31/

.

.

Direct Yellow 34

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.81Direct Yellow 34 (Tetrasodium;3-[[4-[[4-[(4,8-disulfonatonaphthalen-2-yl)diazenyl]-2-methoxy-5-methylphenyl]carbamoylamino]-5-methoxy-2-methylphenyl]diazenyl]naphthalene-1,5-disulfonate) (CAS No. '33'3) (provided for in subheading .14.50)FreeNo changeNo changeOn or before 12/31/

.

.

Vat Orange 2 dye powder

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.82Vat Orange 2 (1,2-Dibromopyranthrene-8,16-dione) (CAS No. '35'2) (provided for in subheading .15.20)FreeNo changeNo changeOn or before 12/31/

.

.

Vat Violet 13 dye

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.83Vat Violet 13 (5,20-Diazaheptacyclo [16.12.0.03,16.04,13.06, 11.019,28.021,26] triaconta-1(18),3(16),4(13),6,8,10, 14,19(28),21,23, 25,29-dodecaene-2,12,17,27-tetrone) (CAS No. '87'7) (CIN ) (provided for in subheading .15.20)FreeNo changeNo changeOn or before 12/31/

.

.

Vat Brown 3 dye

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.84Vat Brown 3 (N-(28-Benzamido-6,13,19,26-tetraoxo-16-azaheptacyclo [15.12.0.02,15.05,14.07, 12.018,27.020,25] nonacosa-1(29),2(15),3,5(14),7(12), 8,10,17,20,22,24,27-dodecaen-8-yl)benzamide) (CAS No. 131'92'0) (provided for in subheading .15.20) FreeNo changeNo changeOn or before 12/31/

.

.

Vat Red 10 dye powder

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.85Vat Red 10 (2-(1-Amino-9,10-dioxoanthracen-2-yl)naphtho[2,3-f][1,3]benzoxazole-5,10-dione) (CAS No. '79'5) (provided for in subheading .15.30)FreeNo changeNo changeOn or before 12/31/

.

.

Vat Brown 57 dye

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.86Vat Brown 57 (CAS No. '28'0) (provided for in subheading .15.30)FreeNo changeNo changeOn or before 12/31/

.

.

Vat Red 31 dye powder

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.87Vat Red 31 dye powder (1-Amino-2-[5-(1-amino-9,10-dioxoanthracen-2-yl)-1,3,4-oxadiazol-2-yl]anthracene-9,10-dione) (CAS No. '25'0) (CIN ) (provided for in subheading .15.40)FreeNo changeNo changeOn or before 12/31/

.

.

Dye mixtures of Vat Brown 3 and Vat Black 27

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.88Disperse dye mixtures of Vat Brown 3 (N-(28-benzamido-6,13,19,26-tetraoxo-16-azaheptacyclo [15.12.0.0^ (2,15).0^(5,14).0^ (7,12).0^(18,27).0^ (20,25)] nonacosa-1(29),2(15), 3,5(14), 7(12), 8,10,17,20,22, 24,27-dodecaen-8-yl)benzamide) (CAS No. 131'92'0) and Vat Black 27 (N-(28-benzamido-6,13,19, 26-tetraoxo-16-azaheptacyclo [15.12.0.0^ (2,15).0^(5,14).0^ (7,12).0^ (18,27).0^(20,25)] nonacosa-1(29),2,4,7, 9,11,14,17, 20,22, 24,27-dodecaen-4-yl) benzamide) (CAS No. '81'9) (provided for in subheading .15.40)FreeNo changeNo changeOn or before 12/31/

.

.

Vat Red 13

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.89Vat Red 13 (15-Ethyl-12-(15-ethyl-8-oxo-14,15-diazatetracyclo [7.6.1.02,7.013,16] hexadeca-1(16),2,4,6,9,11,13-heptaen-12-yl)-14,15-diazatetracyclo [7.6.1.02,7.013,16] hexadeca-1(16),2,4,6,9,11,13-heptaen-8-one) (CAS No. '77'4) (provided for in subheading .15.80) FreeNo changeNo changeOn or before 12/31/

.

.

Vat Yellow 2 dye powder

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.90Vat Yellow 2 (6,16-Diphenyl-5,15-dithia-7,17-diazapentacyclo [11.7.0.03,11.04,8.014,18] icosa-1(13),3(11),4(8),6,9, 14(18),16,19-octaene-2,12-dione) (CAS No. 129'09'9) (provided for in subheading .15.80)FreeNo changeNo changeOn or before 12/31/

.

.

Vat Yellow 33 dye

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.91Vat Yellow 33 (N-(9,10-Dioxoanthracen-1-yl)-4-[4-[[4-[4-[(9,10-dioxoanthracen-1-yl)carbamoyl]phenyl] phenyl]diazenyl]phenyl] benzamide) (CAS No. '50'8) (provided for in subheading .15.80)FreeNo changeNo changeOn or before 12/31/

.

.

Vat Green 1 dye

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.92Vat Green 1 (Anthra[9,1,2-cde]benzo[rst]pentaphene-5,10-dione, 16,17-dimethoxy-) (CAS No. 128'58'5) (CIN ) (provided for in subheading .15.80)FreeNo changeNo changeOn or before 12/31/

.

.

Vat Green 3

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.93Vat Green 3 (Anthra[2,1,9-mna]naphth[2,3-h]acridine-5,10,15(16H)-trione) (CAS No. '76'9) (CIN ) (provided for in subheading .15.80)FreeNo changeNo changeOn or before 12/31/

.

.

Vat Blue 6 dye

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.94Vat Blue 6 (15,30-Dichloro-2,17-diazaheptacyclo [16.12.0.03,16.04,13.06, 11.019,28.021,26] triaconta-1(30),3,6,8,10,13,15,18,21, 23,25,28-dodecaene-5,12,20,27-tetrone) (CAS No. 130'20'1) (provided for in subheading .15.80)FreeNo changeNo changeOn or before 12/31/

.

.

Vat Blue 20 dye

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.95Vat Blue 20 (Anthra[9,1,2-cde]benzo[rst]pentaphene-5,10-dione) (CAS No. 116'71'2) (CIN ) (provided for in subheading .15.80)FreeNo changeNo changeOn or before 12/31/

.

.

Vat Violet 1

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.96Vat Violet 1 (Benzo[rst]phenanthro [10,1,2-cde] pentaphene-9,18-dione, dichloro-) (CAS No. '55'6) (CIN ) (provided for in subheading .15.80)FreeNo changeNo changeOn or before 12/31/

.

.

Vat Brown 1 dye

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.97Vat Brown 1 (Naphth[2',3':6,7]indolo[2,3-c]dinaphtho[2,3-a:2',3'-i]carbazole-5,10,15,17,22,24-hexone, 16,23-dihydro-) (CAS No. '33'4) (CIN ) (provided for in subheading .15.80)FreeNo changeNo changeOn or before 12/31/

.

.

Vat Black 16 dye

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.98Vat Black 16 (8-Aminononacyclo [18.10.2.22,5.03,16.04,13.06, 11.017,31.022,27.028,32] tetratriaconta-1(31),2,4,6(11), 7,9,13,15,17,19,22,24,26, 28(32),29,33-hexadecaene-12,21-dione) (CAS No. '69'9) (provided for in subheading .15.80)FreeNo changeNo changeOn or before 12/31/

.

.

Vat Black 25

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.22.99Vat Black 25 (Anthra[2,1,9-mna]naphth[2,3-h]acridine-5,10,15(16H)-trione, 3-[(9,10-dihydro-9,10-dioxo-1-anthracenyl)amino]-) (CAS No. '53'3) (CIN ) (provided for in subheading .15.80)FreeNo changeNo changeOn or before 12/31/

.

.

Vat Black 27

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.01Vat Black 27 (Benzamide, N,N'-(10,15,16,17-tetrahydro-5,10,15,17-tetraoxo-5H-dinaphtho[2,3-a:2',3'-i]carbazole-6,9-diyl)bis-) (CAS No. '81'9) (CIN ) (provided for in subheading .15.80)FreeNo changeNo changeOn or before 12/31/

.

.

Reactive Yellow 145

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.02Reactive Yellow 145 (Tetrasodium;7-[[2-(carbamoylamino)-4-[[4-chloro-6-[3-(2-sulfonatooxyethylsulfonyl) anilino]-1,3,5-triazin-2-yl] amino]phenyl]diazenyl] naphthalene-1,3,6-trisulfonate) (CAS No. '00'2) (provided for in subheading .16.30)FreeNo changeNo changeOn or before 12/31/

.

.

Reactive Red 195

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.03Reactive Red 195 (Pentasodium 5-[[4-chloro-6-[3-(2-sulfonatooxyethylsulfonyl)anilino]-1,3,5-triazin-2-yl]amino]-3-[(1,5-disulfonatonaphthalen-2-yl)diazenyl]-4-hydroxynaphthalene-2,7-disulfonate) (CAS No. '64'1) (provided for in subheading .16.30)FreeNo changeNo changeOn or before 12/31/

.

.

Reactive Blue 49

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.04Reactive Blue 49 (Trisodium 1-amino-4-[3-[[4-chloro-6-(2-sulfonatoanilino)-1,3,5-triazin-2-yl]amino]-2,4,6-trimethyl-5-sulfonatoanilino]-9,10-dioxoanthracene-2-sulfonate) (CAS No. '18'7) (provided for in subheading .16.30)FreeNo changeNo changeOn or before 12/31/

.

.

Reactive Blue 72

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.05Reactive Blue 72 (Cuprate(2-), [C-[[[3-[(4-amino-6-chloro-1,3,5-triazin-2-yl)amino]-4-sulfophenyl]amino]sulfonyl]-C-(aminosulfonyl)-29H,31H-phthalocyanine-C-sulfonato(4-)-κN29,κN30,κN31,κN32]-, sodium (1:2)) (CAS No. '01'1) (provided for in subheading .16.30)FreeNo changeNo changeOn or before 12/31/

.

.

Reactive Yellow 95 powder

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.06Reactive Yellow 95 (Trisodium 4-[[4-chloro-6-(3-sulfonatoanilino)-1,3,5-triazin-2-yl]amino]-2-[[1-ethyl-6-hydroxy-4-methyl-2-oxo-5-(sulfonatomethyl)pyridin-3-yl]diazenyl]benzenesulfonate) (CAS No. '43'3) (provided for in subheading .16.30)FreeNo changeNo changeOn or before 12/31/

.

.

Reactive Red 245

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.07Reactive Red 245 (Tetrasodium 5-[4-chloro-6-(N-ethylanilino)-1,3,5-triazin-2-ylamino]-4-hydroxy-3-(1,5-disulfonatonaphtalen-2-ylazo)naphthalene-2,7-disulfonate) (CAS No. '57'9) (provided for in subheading .16.30)FreeNo changeNo changeOn or before 12/31/

.

.

Reactive Brown 11

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.08Reactive Brown 11 (Tetrasodium; 2-[[4-[[4-[(4-amino-6-chloro-1,3,5-triazin-2-yl)amino]-5-sulfonatonaphthalen-1-yl]diazenyl]-7-sulfonatonaphthalen-1-yl]diazenyl]benzene-1,4-disulfonate) (CAS No. '16'9) (provided for in subheading .16.30)FreeNo changeNo changeOn or before 12/31/

.

.

Mixtures of Reactive Black 5 (Na) (FKP), Reactive Scarlet F01', and Reactive Orange 131

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.09Disperse dye mixture of Reactive Black 5 (Na) (FKP) (tetrasodium; 4-amino-5-hydroxy-3,6-bis[[4-(2-sulfonatooxyethylsulfonyl) phenyl]diazenyl]naphthalene-2,7-disulfonate (CAS No. '24'8); Reactive Scarlet F01' (2-naphthalenesulfonic acid, 7-amino-4-hydroxy-, coupled with diazotized 2-[(4-aminophenyl) sulfonyl] ethyl hydrogen sulfate and diazotized 2-amino-5-[[2-(sulfooxy)ethyl]sulfonyl] benzenesulfonic acid, potassium sodium salts) (CAS No. '06'8); reaction mass of 7-amino-3,8-bis-[4-(2-sulfoxyethylsulfonyl)-2-sulfophenylazo]-4-hydroxynaphthalene-2-sulfonic acid, Na/K salt and 7-amino-3-[4-(2-sulfoxyethylsulfonyl) phenylazo]-4-hydroxy-8-[4-(2-sulfoxyethylsulfonyl)-2-sulfophenylazo] naphthalene-2-sulfonic acid, Na/K salt and 7-amino-3,8-bis-[4-(2-sulfoxyethylsulfonyl) phenylazo]-4-hydroxynaphthalene-2-sulfonic acid, Na/K salt and 7-amino-8-[4-(2-sulfoxyethylsulfonyl)-phenylazo]-4-hydroxy-3-[4-(2-sulfoxyethylsulfonyl)-2-sulfophenylazo] naphthalene-2-sulfonic acid, Na/K salt, and Reactive Orange 131 (benzenesulfonic acid, 2,4-diamino-3-[2-[4-[[2-(sulfooxy) ethyl]sulfonyl] phenyl]diazenyl]-5-[2-[2-sulfo-4-[[2-(sulfooxy) ethyl]sulfonyl] phenyl] diazenyl]-, potassium sodium salt (1:?:?)) (CAS No. '95'5) and dipotassium disodium 2,4-diamino-5-(2-{2-sulfo-4-[2-(sulfooxy)ethanesulfonyl] phenyl}diazen-1-yl)-3-(2-{4-[2-(sulfooxy)ethanesulfonyl] phenyl}diazen-1-yl) benzene-1-sulfonate (provided for in subheading .16.30)FreeNo changeNo changeOn or before 12/31/

.

.

Reactive Yellow F98'

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.10Reactive Yellow F98' (benzenesulfonic acid, 2-[2-[2-[(aminocarbonyl)amino]-4-[(2,6-difluoro-4-pyrimidinyl)amino]phenyl]diazenyl]-5-[[2-(sulfooxy)ethyl]sulfonyl]-, sodium salt (1:2)) (CAS No. '21'1) (provided for in subheading .16.30)FreeNo changeNo changeOn or before 12/31/

.

.

Dye mixtures of Reactive Orange 131 and Reactive Scarlet F07'

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.11Disperse dye mixtures of Reactive Orange 131 (CAS No. '95'5) (dipotassium disodium 2,4-diamino-5-(2-{2-sulfo-4-[2-(sulfooxy)ethanesulfonyl] phenyl}diazen-1-yl)-3-(2-{4-[2-(sulfooxy)ethanesulfonyl] phenyl}diazen-1-yl)benzene-1-sulfonate) and Reactive Scarlet F07' (CAS No. '92'4) (pentasodium 7-amino-4-hydroxy-3,8-bis-[2-sulfo-4-(2-sulfooxy-ethanesulfonyl)-phenylazo]-naphthalene-2-sulfonate) (provided for in subheading .16.30)FreeNo changeNo changeOn or before 12/31/

.

.

Reactive Black 31

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.12Reactive Black 31 (cuprate(4-), [4,5-dihydro-4-[2-[8-(hydroxy-.kappa.O)-7-[2-[2-(hydroxy-.kappa.O)-5-methoxy-4-[[2-(sulfooxy)ethyl] sulfonyl]phenyl]diazenyl-.kappa.N1]-6-sulfo-2-naphthalenyl]diazenyl]-5-oxo-1-(4-sulfophenyl)-1H-pyrazole-3-carboxylato(6-)]-, sodium) (CAS No. '91'7) (provided for in subheading .16.50)FreeNo changeNo changeOn or before 12/31/

.

.

Reactive Red 120

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.13Reactive Red 120 (hexasodium 5-[[4-chloro-6-[4-[[4-chloro-6-[[8-hydroxy-3,6-disulfonato-7-[(2-sulfonatophenyl)diazenyl]naphthalen-1-yl]amino]-1,3,5-triazin-2-yl]amino]anilino]-1,3,5-triazin-2-yl]amino]-4-hydroxy-3-[(2-sulfonatophenyl)diazenyl]naphthalene-2,7-disulfonate) (CAS No. '04'0) (provided for in subheading .16.50)FreeNo changeNo changeOn or before 12/31/

.

.

Reactive Blue 5

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.14Reactive Blue 5 (1-Amino-4-{[3-({4-chloro-6-[(3-sulfophenyl)amino]-1,3,5-triazin-2-yl}amino)-4-sulfophenyl]amino}-9,10-dioxo-9,10-dihydro-2-anthracenesulfonic acid) (CAS No. '51'1) (provided for in subheading .16.50)FreeNo changeNo changeOn or before 12/31/

.

.

Reactive Orange 13

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.15Reactive Orange 13 powder (trisodium 2-[[6-[(4-amino-6-chloro-1,3,5-triazin-2-yl)-methylamino]-1-hydroxy-3-sulfonatonaphthalen-2-yl]diazenyl]naphthalene-1,5-disulfonate) (CAS No. '89'6) (provided for in subheading .16.50)FreeNo changeNo changeOn or before 12/31/

.

.

Reactive Orange 12

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.16Reactive Orange 12 powder (trisodium 7-[[4-[(4-amino-6-chloro-1,3,5-triazin-2-yl)amino]-2-(carbamoylamino) phenyl]diazenyl]naphthalene-1,3,6-trisulfonate) (CAS No. '14'7) (provided for in subheading .16.50)FreeNo changeNo changeOn or before 12/31/

.

.

Pigment Red 177

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.17 Pigment Red 177 (1-amino-4-(4-amino-9,10-dioxoanthracen-1-yl)anthracene-9,10-dione) (CAS No. '63'2) (provided for in subheading .17.04) FreeNo changeNo changeOn or before 12/31/

.

.

Pigment Yellow 110

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.18 Pigment Yellow 110 (4,5,6,7-tetrachloro-3-[4-[(4,5,6,7-tetrachloro-3-oxoisoindol-1-ylidene)amino]phenyl]iminoisoindol-1-one) (CAS No. '18'1) (provided for in subheading .17.04) FreeNo changeNo changeOn or before 12/31/

.

.

Pigment Yellow 147

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.19 Pigment Yellow 147 (1-[[4-[(9,10-dioxoanthracen-1-yl)amino]-6-phenyl-1,3,5-triazin-2-yl]amino]anthracene-9,10-dione) (CAS No. '16'5) (provided for in subheading .17.60) FreeNo changeNo changeOn or before 12/31/

.

.

Pigment Orange 64

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.20 Pigment Orange 64 (5-[(6-methyl-2-oxo-1,3-dihydrobenzimidazol-5-yl)diazenyl]-1,3-diazinane-2,4,6-trione) (CAS No. '84'2) (provided for in subheading .17.60) FreeNo changeNo changeOn or before 12/31/

.

.

Pigment Blue 29

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.21 Pigment Blue 29 (aluminum sodium orthosilicate trisulfane-1,3-diide (6:8:6:1)) (CAS No. '37'5) (provided for in subheading .17.60) FreeNo changeNo changeOn or before 12/31/

.

.

Pigment Violet 15

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.22 Pigment Violet 15 (hexaaluminum;hexasodium; tetrathietane;hexasilicate) (CAS No. '96'9) (provided for in subheading .17.60) FreeNo changeNo changeOn or before 12/31/

.

.

Pigment Blue 14

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.23 Pigment Blue 14 (ethanaminium, N-(4-(bis(4-(diethylamino)phenyl)methylene)-2,5-cyclohexadien-1-ylidene)-N-ethyl-, molybdatetungstatephosphate) (CAS No. '88'8) (provided for in subheading .17.90) FreeNo changeNo changeOn or before 12/31/

.

.

Solvent Blue 97

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.24 Solvent Blue 97 (1,4-Bis(2,6-diethyl-4-methylanilino)anthracene-9,10-dione) (CAS Nos. '44'6 and '62'2) (provided for in subheading .19.11) FreeNo changeNo changeOn or before 12/31/

.

.

Solvent Green 5

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.25 Solvent Green 5 (bis(2-methylpropyl) perylene-3,9-dicarboxylate) (CAS No. '50'5) (provided for in subheading .19.11) FreeNo changeNo changeOn or before 12/31/

.

.

Solvent Yellow 98

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.26 Solvent Yellow 98 (14-octadecyl-8-thia-14-azapentacyclo [10.6.2.0^2,7.0^9, 19.0^16,20] icosa-1(19),2,4,6,9,11,16(20),17-octaene-13,15-dione) (CAS No. '74'8) (provided for in subheading .19.11) FreeNo changeNo changeOn or before 12/31/

.

.

Solvent Green 7

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.27 Solvent Green 7 (trisodium 8-hydroxypyrene-1,3,6-trisulfonate) (CAS No. '69'6) (provided for in subheading .19.11) FreeNo changeNo changeOn or before 12/31/

.

.

Solvent Red 195

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.28 Solvent Red 195 (methyl 4-cyano-5-[[5-cyano-2,6-bis(3-methoxypropylamino)-4-methylpyridin-3-yl]diazenyl]-3-methylthiophene-2-carboxylate) (CAS No. '71'9) (provided for in subheading .19.20) FreeNo changeNo changeOn or before 12/31/

.

.

Solvent Orange 115

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.29 Solvent Orange 115 (7H-Benzimidazo[2,1-a] benzo[3,4][2]benzothiopyrano [7,8,1-def]isoquinolin-7-one) (CAS No. '32'8) (provided for in subheading .19.20) FreeNo changeNo changeOn or before 12/31/

.

.

Specialty dyes

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.30 White/bluish powder dye containing benzenesulfonamide, 2,2'-([1,1'-biphenyl]-4,4'-diyldi-2,1-ethenediyl)bis[N-(3-hydroxypropyl)-, polymer with formaldehyde, ar-methylbenzenesulfonamide and 1,3,5-triazine-2,4,6-triamine (CAS No. '40'3) (provided for in subheading .19.20) FreeNo changeNo changeOn or before 12/31/

.

.

Solvent Green 3

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.31 Solvent Green 3 (1,4-bis(4-methylanilino)anthracene-9,10-dione) (CAS No. 128'80'3) (CIN ) (provided for in subheading .19.25) FreeNo changeNo changeOn or before 12/31/

.

.

Solvent Blue 36

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.33 Solvent Blue 36 (1,4-bis(propan-2-ylamino)anthracene-9,10-dione) (CAS No. '37'5) (provided for in subheading .19.25) FreeNo changeNo changeOn or before 12/31/

.

.

Mixtures of Solvent Green 3

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.34 Mixtures of Solvent Green 3 (1,4-bis(4-methylanilino)anthracene-9,10-dione) (CAS No. 128'80'3) (provided for in subheading .19.25) FreeNo changeNo changeOn or before 12/31/

.

.

Solvent Red 52

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.35 Solvent Red 52 (3-methyl-6-[(4-methylphenyl)amino]-3H-naphtho[1,2,3-de]quinoline-2,7-dione) (CAS No. 81'39'0) (provided for in subheading .19.25) FreeNo changeNo changeOn or before 12/31/

.

.

Solvent Red 149

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.36 Solvent Red 149 (6-(cyclohexylamino)-3-methyl-3H-naphtho[1,2,3-de]quinoline-2,7-dione) (CAS No. '57'8 or '8'6) (provided for in subheading .19.25) FreeNo changeNo changeOn or before 12/31/

.

.

Solvent Red 207

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.37 Solvent Red 207 (1,5-bis(cyclohexylamino) anthracene-9,10-dione) (CAS No. '68'6) (provided for in subheading .19.25) FreeNo changeNo changeOn or before 12/31/

.

.

Solvent Violet 14

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.38 Solvent Violet 14 (1,5-bis(4-methylanilino)anthracene-9,10-dione) (CAS No. '40'1) (provided for in subheading .19.25) FreeNo changeNo changeOn or before 12/31/

.

.

Solvent Yellow 179

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.39 Solvent Yellow 179 (2-[[4-[2-(4-cyclohexylphenoxy) ethyl-ethylamino]-2-methylphenyl]methylidene] propanedinitrile) (CAS No. '53'7) (provided for in subheading .19.25) FreeNo changeNo changeOn or before 12/31/

.

.

Solvent Yellow 131

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.40 Solvent Yellow 131 (2-(3-hydroxypropyl)-6-(3-hydroxypropylamino)benzo[de]isoquinoline-1,3-dione) (CAS No. '24'6) (provided for in subheading .19.25) FreeNo changeNo changeOn or before 12/31/

.

.

Hogen Blue XB-20

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.41 Synthetic organic coloring matter containing copper(II) phthalocyanine (CAS No. 147'14'8) (provided for in subheading .19.40) FreeNo changeNo changeOn or before 12/31/

.

.

Solvent Yellow 104

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.42 Solvent Yellow 104 (CAS No. '34'0) (provided for in subheading .19.40) FreeNo changeNo changeOn or before 12/31/

.

.

Combination of Fluorescent Brighteners 367 and 371

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.43 Mixture of Fluorescent Brightener 367 (CAS No. '22'5) and Fluorescent Brightener 371 (provided for in subheading .20.80) FreeNo changeNo changeOn or before 12/31/

.

.

Fluorescent Brightener CBS-X

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.44 Disodium 2,2'-[biphenyl-4,4'-diyldiethene-2,1-diyl]dibenzenesulfonate (CAS No. '41'8) of a kind used as a fluorescent brightening agent (provided for in subheading .20.80) FreeNo changeNo changeOn or before 12/31/

.

.

Optical Brightener SWN

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.45 7-(Diethylamino)-4-methylchromen-2-one (CAS No. 91'44'1) (provided for in subheading .20.80) FreeNo changeNo changeOn or before 12/31/

.

.

C.I. Fluorescent Brightener 199:1

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.46 Mixtures of 1-(2-cyanostyryl)-4-(4-cyanostyryl)benzene (CAS No. '38'2); 2,2'-oxydi(ethan-1-ol) (CAS No. 111'46'6); acetic acid ethenyl ester, polymer with ethenol (CAS No. -24-5); methyl 4-[2-[4-(5-methyl-2-benzoxazolyl)phenyl]vinyl]benzoate (CAS No. '18'4); and formaldehyde, polymer with oxirane and phenol, methyl ether (CAS No. '31'8) of a kind used as fluorescent brightening agents (provided for in subheading .20.80) FreeNo changeNo changeOn or before 12/31/

.

.

Fluorescent Brightener 368

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.47 Mixtures of 2-[4-[(E)-2-[4-(1,3-benzoxazol-2-yl)phenyl]ethenyl]phenyl]-1,3-benzoxazole (CAS No. '45'5); 5-methyl-2-[4-[(E)-2-[4-(5-methyl-1,3-benzoxazol-2-yl)phenyl]ethenyl]phenyl]-1,3-benzoxazole (CAS No. '00'4) and 2-[4-[(E)-2-[4-(1,3-benzoxazol-2-yl)phenyl]ethenyl]phenyl]-5-methyl-1,3-benzoxazole (CAS No. '49'9) (provided for in subheading .20.80) FreeNo changeNo changeOn or before 12/31/

.

.

1,4-Bis(2-cyanostyryl)benzene

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.482-[(E)-2-[4-[(E)-2-(2-Cyanophenyl)ethenyl] phenyl]ethenyl]benzonitrile (CAS No. '39'3) (provided for in subheading .20.80)FreeNo changeNo changeOn or before 12/31/

.

.

Certain manufacturing inputs

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.491-[3-(Dimethylamino)propyl]-4-methyl-6-oxo-3-pyridin-1-ium-1-ylpyridin-2-olate (CAS No. '33'7) (provided for in subheading .90.00)FreeNo changeNo changeOn or before 12/31/

.

.

Cerium sulfide pigments

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.50Pigment preparations based on cerium sulfide or mixtures of cerium sulfide and lanthanum sulfide (CAS Nos. '93'6 and '49'1) (provided for in subheading .49.60)FreeNo changeNo changeOn or before 12/31/

.

.

Matte pearlescent pigments

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.51Coloring matter of mica (CAS No. '26'2) and titanium dioxide (CAS No. '67'7), coated with submicron poly(methyl methacrylate) (CAS No. '14'7) spheres to create a matte optical effect (provided for in subheading .49.60)FreeNo changeNo changeOn or before 12/31/

.

.

Angle-dependent interference pigments

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.52Angle-dependent interference pigments based on a substrate of transparent or translucent inorganic flakes of fluorophlogopite (CAS No. '38'2), titanium dioxide (CAS No. '67'7), and synthetic amorphous silica (CAS No. '52'5) (provided for in subheading .49.60)FreeNo changeNo changeOn or before 12/31/

.

.

Inorganic Lumilux

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.53Inorganic products of a kind used as luminophores containing zinc sulfide (ZnS), copper chloride-doped (CAS No. '70'1), dizinc;silicate (CAS No. '47'2), yttrium oxide sulfide (Y2O2S), europium-doped (CAS No. '83'8), erbium sodium ytterbium fluoride (Er0.04NaYb0.96F4) (CAS No. '08'6), diyttrium dioxide sulfide (CAS No. '04'4), oxygen(2-);yttrium(3+) (CAS No. '36'9), (CAS No. '37'9) and erbium(III) oxide (CAS No. '16'4) (provided for in subheading .50.00)FreeNo changeNo changeOn or before 12/31/

.

.

Ribbon/Matrix Resin

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.54Optical fiber ribbon cable matrix resin, a polymer in the form of a liquid coating, with a density of approximately 1.12 kg/liter, viscosity of to cps at 25 °C, with elongation greater than 20 percent and tensile strength of 22 to 32 MPa (provided for in subheading .20.00)FreeNo changeNo changeOn or before 12/31/

.

.

Bonding agent

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.55Solution as defined in note 4 to chapter 32, mixture of poly(tolylene 2,4-diisocyanate) (CAS No. '20'2); 2,4-diisocyanato-1-methylbenzene (CAS No. 584'84'9) and butyl acetate (CAS No. 123'86'4) (provided for in subheading .90.00)FreeNo changeNo changeOn or before 12/31/

.

.

Fluoropolymer resin

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.56Solution of high molecular weight fluoroethylene-alkyl vinylether (FEVE) alternative copolymer, containing 38 to 42 percent by weight of moderate OH number resin in a blend of cyclohexanone and aromatic hydrocarbon solvent, having a Tg of 20 °C (CAS No. '69'8) (provided for in subheading .90.00)FreeNo changeNo changeOn or before 12/31/

.

.

Zirconium 12 paint drier

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.57Zirconium 12 paint drier, mixtures of naptha, petroleum, hydrotreated heavy (CAS No. '48'9), zirconium 2-ethylhexanoate (CAS No. '99'9), nonane (CAS No. 111'84'2), zirconium, bis(acetate-o)oxo- (CAS No. '24'2) (provided for in heading .00.00)FreeNo changeNo changeOn or before 12/31/

.

.

Zirconium 24 paint drier

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.58Zirconium 24 paint drier, mixtures of naptha, petroleum, hydrotreated heavy (CAS No. '48'9), zirconium 2-ethylhexanoate (CAS No. '99'9), nonane (CAS No. 111'84'2), zirconium, bis(acetate-o)oxo- (CAS No. '24'2) (provided for in heading .00.00)FreeNo changeNo changeOn or before 12/31/

.

.

Drier accelerators

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.59Prepared drier accelerators containing a mixture of cyclopentanone (CAS No. 120'92'3), cyclohexanone (CAS No. 108'94'1), and 2-pyridin-2-ylpyridine (CAS No. 366'18'7) (provided for in heading .00.00))FreeNo changeNo changeOn or before 12/31/

.

.

Lemon oil

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.60Essential oils of lemon (CAS No. '56'8) (provided for in subheading .13.00)3.3%No changeNo changeOn or before 12/31/

.

.

Sulfonic acids, C14'17-sec-alkane, sodium salt

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.61Sulfonic acids, C14'17-sec-alkane, sodium salt (CAS No. '15'1) anionic aromatic surface-active agent (provided for in subheading .11.20)FreeNo changeNo changeOn or before 12/31/

.

.

Potassium ethyl octylphosphonate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.62Potassium; ethoxy(octyl)phosphinate (CAS No. '28'1) (provided for in subheading .11.50)FreeNo changeNo changeOn or before 12/31/

.

.

Intermediate in the production of industrial lubricants

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.63(Z)-N-Methyl-N-(1-oxo-9-octadecenyl)glycine (N-oleylsarcosine) (CAS No. 110'25'8) surfactant (provided for in subheading .11.50)FreeNo changeNo changeOn or before 12/31/

.

.

Polyether dispersant

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.64Oxirane, 2-methyl-, polymer with oxirane, mono[(diethylamino)alkyl] ether surfactant (CAS No. '96'6) (provided for in subheading .12.50)FreeNo changeNo changeOn or before 12/31/

.

.

D-Glucopyranose

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.65(3R,4S,5S,6R)-2-decoxy-6-(hydroxymethyl)oxane-3,4,5-triol (CAS No. '73'1) (provided for in subheading .13.20)FreeNo changeNo changeOn or before 12/31/

.

.

2-Dodecoxy-6-(hydroxymethyl)oxane-3,4,5-triol

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.66(3R,4S,5S,6R)-2-Dodecoxy-6-(hydroxymethyl)oxane-3,4,5-triol (CAS No. '47'9) (provided for in subheading .13.20)FreeNo changeNo changeOn or before 12/31/

.

.

Mixtures of certain C12'14-alkyl ethers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.67Mixtures of poly(oxy-1,2-ethanediyl), α-phosphono-ω-hydroxy-, C12-14-alkyl ethers (CAS No. '63'2); poly(oxy-1,2-ethanediyl), α,α'-phosphinicobis[ω-hydroxy-, di-C12-14-alkyl ethers (CAS No. '61'0); poly(oxy-1,2-ethanediyl), α,α',α'-phosphinylidynetris[ω-hydroxy-, tri-C12-14-alkyl ethers (CAS No. '62'1); alcohols C12'14, ethoxylated (CAS No. '50'9) (provided for in subheading .13.50)FreeNo changeNo changeOn or before 12/31/

.

.

Manufacturing chemical

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.68Mixtures of fatty acids, coco, ethoxylated (CAS No. '29'5) and butan-1-ol;ethane-1,2-diol;propane-1,2-diol (CAS No. '95'3) surfactant (provided for in subheading .13.50)FreeNo changeNo changeOn or before 12/31/

.

.

Nonionic surfactant

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.69D-Glucopyranose, oligomeric, C10'16-alkyl glycosides (CAS No. '47'9); water (CAS No. '18'5); and D-glucopyranose, oligomeric, 2-ethylhexyl glycosides (CAS No. '93'7) (provided for in subheading .13.50)FreeNo changeNo changeOn or before 12/31/

.

.

Chemical used in textile manufacturing

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.70Mixtures of sodium [1-carboxy-17-(dibutylamino)-17-oxoheptadecan-8-yl] sulfate (CAS No. '93'0); sodium;18-hydroxy-18-oxooctadecane-1-sulfonate (CAS No. '94'1); sodium (Z)-octadec-9-enoate (CAS No. 143'19'1); and (Z)-N,N-dibutyloctadec-9-enamide (CAS No. '80'1) (provided for in subheading .90.10)FreeNo changeNo changeOn or before 12/31/

.

.

Ethoxylated tristyrylphenol phosphate potassium salt

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.71Mixtures of propane-1,2-diol (CAS No. 57'55'6), poly(oxy-1,2-ethanediyl), α-(tris(1-phenylethyl)phenyl)-ω-hydroxy- (CAS No. '09'5), and poly(oxy-1,2-ethanediyl), α-(2,4,6-tris(1-phenylethyl)phenyl)-ω-hydroxy-, phosphate, potassium salt (CAS No. '84'8) (provided for in subheading .90.30)FreeNo changeNo changeOn or before 12/31/

.

.

Sodium polycarboxylate, aqueous solution

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.72Mixtures of 2,5-furandione, polymer with 2,4,4-trimethylpentene, sodium salt (sodium;oxolane-2,5-dione;2,4,4-trimethylpent-1-ene) (CAS No. '81'8), and poly(oxy-1,2-ethanediyl), α-(carboxymethyl)-ω-(tridecyloxy)-, branched, sodium salt (CAS No. '17'8) (provided for in subheading .90.50)FreeNo changeNo changeOn or before 12/31/

.

.

Aqueous emulsion of a mixture of amine soaps and miscellaneous other additives

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.73Mixtures of propane-1,2,3-triol (glycerol) (CAS No. 56'81'5); 2-octadec-9-enoxyethanol phosphoric acid (CAS No. '69'2); tall oil fatty acid (CAS No. '12'3); 2,3-bis[[(Z)-12-hydroxyoctadec-9-enoyl]oxy]propyl (Z)-12-hydroxyoctadec-9-enoate (castor oil) (CAS No. '79'4); alcohols C16-18,18 unsaturated, ethoxylated (CAS No. '66'1); 2-(2-hydroxyethylamino)ethanol (Diethanolamine) (CAS No. 111'42'2); distillates (petroleum), hydrotreated light naphthenic (CAS No. '53'6); phosphoric acid (CAS No. '38'2); ethane-1,2-diamine (CAS No. 107'15'3); and 2H-benzotriazole (CAS No. 95'14'7) (provided for in subheading .19.50)FreeNo changeNo changeOn or before 12/31/

.

.

Aqueous dispersion of a mixture of fatty amine and amide soaps and miscellaneous other additives

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.74Mixtures of (2E,4E,6E,8E,10E,12E)-pentadeca-2,4,6,8,10,12,14-heptaenoic acid (Fatty acids, C14-18 and C16-18-unsaturated) (CAS No. '06'8); 2-octadec-9-enoxyethanol;phosphoric acid (CAS No. '69'2); distillates, petroleum, solvent-dewaxed heavy paraffinic (CAS No. '65'0); alcohols C16-18,18 unsaturated, ethoxylated (CAS No. '66'1); 2-(2-hydroxyethylamino)ethanol (Diethanolamine) (CAS No. 111'42'2); ethane-1,2-diamine (CAS No. 107'15'3); phosphoric acid (CAS No. '38'2), amines, tallow alkyl, ethoxylated (CAS No. '26'2); and 2H-benzotriazole (CAS No. 95'14'7) (provided for in subheading .19.50)FreeNo changeNo changeOn or before 12/31/

.

.

Aqueous dispersion of a mixture of fatty amine and amide soaps and miscellaneous other additives

If you want to learn more, please visit our website Tristyrylphenol Ethoxylates in the Chemical Industry.

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.75Mixtures of N-[2-(octadecanoylamino)ethyl]octadecanamide (CAS No. 110'30'5); 2-(2-hydroxyethylamino)ethanol (CAS No. 111'42'2); phosphoric acid (CAS No. '38'2); amines, tallow alkyl, ethoxylated (CAS No. '26'2); fatty acids, C14-18 and C16-18-unsaturated (CAS No. '06'8); and nonylphenol, branched, ethoxylated, phosphated (CAS No. '53'3) (provided for in subheading .99.00)FreeNo changeNo changeOn or before 12/31/

.

.

Photographic gelatin

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.76Photographic gelatin (CAS No. '70'8) (provided for in subheading .00.55)FreeNo changeNo changeOn or before 12/31/

.

.

Ice fountains (class 1.4G)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.77Ice fountains (Class 1.4G) (CAS No. '70'0) generating a jet of sparklers when lit (provided for in subheading .10.90)FreeNo changeNo changeOn or before 12/31/

.

.

Magic candles containing magnesium powder

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.78Magic candles containing magnesium powder (CAS No. '95'4) that automatically relight themselves when blown out and emit spark effects when lit (provided for in subheading .90.00)FreeNo changeNo changeOn or before 12/31/

.

.

Party snappers (Class 1.4G)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.79Snaps designed to make a loud noise when thrown to the ground (CAS No. '88'8) (provided for in subheading .90.00)FreeNo changeNo changeOn or before 12/31/

.

.

Fenpyroximate 5SC

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.80Mixtures of tert-butyl 4-[[(E)-(1,3-dimethyl-5-phenoxypyrazol-4-yl) methylideneamino] oxymethyl]benzoate (Fenpyroximate) (CAS No. '61'6) and application adjuvants (provided for in subheading .91.25)FreeNo changeNo changeOn or before 12/31/

.

.

Pyrifluquinazon 20SC

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.81Mixtures of 1-acetyl-6-(1,1,1,2,3,3,3-heptafluoropropan-2-yl)-3-(pyridin-3-ylmethylamino)-4H-quinazolin-2-one (Pyrifluquinazon) (CAS No. '27'2) and application adjuvants (provided for in subheading .91.25)FreeNo changeNo changeOn or before 12/31/

.

.

Imidacloprid and Muscalure formulations

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.82Product mixtures containing (NE)-N-[1-[(6-chloropyridin-3-yl)methyl]imidazolidin-2-ylidene]nitramide (Imidacloprid) (CAS No. '41'3) and (Z)-tricos-9-ene (Muscalure) (CAS No. '02'4) (provided for in subheading .91.25)FreeNo changeNo changeOn or before 12/31/

.

.

Formulations of acephate and bifenthrin

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.83Formulations of N-[methoxy(methylsulfanyl) phosphoryl]acetamide (Acephate) (CAS No. '19'1) and (2-methyl-3-phenylphenyl)methyl (1R,3R)-3-[(Z)-2-chloro-3,3,3-trifluoroprop-1-enyl]-2,2-dimethylcyclopropane-1-carboxylate (Bifenthrin) (CAS No. '04'3) (provided for in subheading .91.25)FreeNo changeNo changeOn or before 12/31/

.

.

Fipronil

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.84(RS)-5-Amino-1-[2,6-dichloro-4-(trifluoromethyl) phenyl]-4-(trifluoromethysulfinyl)-1H-pyrazole-3-carbonitrile (Fipronil) (CAS No. '37'3) (provided for in subheading .91.25)FreeNo changeNo changeOn or before 12/31/

.

.

Aluminum phosphide

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.85(Formulated aluminium phosphide (alumanylidynephosphane) (CAS No. '73'8) (provided for in subheading .91.30)FreeNo changeNo changeOn or before 12/31/

.

.

Magnaphos formulations

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.86Formulations of magnesium phosphide (trimagnesium;phosphorus(3-)) (Magnaphos) (CAS No.'74'8) (provided for in subheading .91.30)FreeNo changeNo changeOn or before 12/31/

.

.

Formulated oxamyl

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.87Mixtures of methyl (1Z)-2-(dimethylamino)-N-(methylcarbamoyloxy)-2-oxoethanimidothioate (Oxamyl) (CAS No. '22'0) and application adjuvants (provided for in subheading .91.50)0.2%No changeNo changeOn or before 12/31/

.

.

Formulated fungicides

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.88Mixtures of 2-(trichloromethylsulfanyl)-3a,4,7,7a-tetrahydroisoindole-1,3-dione (Captan) (CAS No. 133'06'2) and application adjuvants (provided for in subheading .92.15)FreeNo changeNo changeOn or before 12/31/

.

.

Certain fungicides

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.89Mixtures of (2Z)-2-[2-fluoro-5-(trifluoromethyl)phenyl]sulfanyl-2-[3-(2-methoxyphenyl)-1,3-thiazolidin-2-ylidene]acetonitrile (CAS No. '10'4); 1-methylpyrrolidin-2-one (CAS No. 872'50'4) and polyoxyalkylene polystyryl phenyl ether (CAS No. '09'5) (provided for in subheading .92.15) FreeNo changeNo changeOn or before 12/31/

.

.

Prothioconazole, Fluopyram, and Trifloxystrobin fungicides

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.90Product mixtures containing 2-[2-(1-chlorocyclopropyl)-3-(2-chlorophenyl)-2-hydroxypropyl]-1H-1,2,4-triazole-3-thione (Prothioconazole) (CAS No. '70'6), N-[2-[3-chloro-5-(trifluoromethyl) pyridin-2-yl]ethyl]-2-(trifluoromethyl)benzamide (Fluopyram) (CAS No. '35'4) and (2E)-2-methoxyimino-2-[2-[[(E)-1-[3-(trifluoromethyl)phenyl] ethylideneamino]oxymethyl] phenyl]acetate (Trifloxystrobin) (CAS No. '21'7) (provided for in subheading .92.15)FreeNo changeNo changeOn or before 12/31/

.

.

Prothioconazole, Metalaxyl, and Tebuconazole fungicides

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.91Product mixtures containing 2-[(2RS)-2-(1-chlorocyclopropyl)-3-(2-chlorophenyl)-2-hydroxypropyl]-2H-1,2,4-triazole-3(4H)-thione (Prothioconazole) (CAS No. '70'6), methyl N-(2-methoxyacetyl)-N-(2,6-xylyl)-DL-alaninate (Metalaxyl) (CAS No. '19'1) and (RS)-1-p-chlorophenyl-4,4-dimethyl-3-(1H-1,2,4-triazol-1-ylmethyl) pentan-3-ol (Tebuconazole) (CAS No. '96'3) (provided for in subheading .92.15)FreeNo changeNo changeOn or before 12/31/

.

.

Mancozeb and Chlorothalonil formulations

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.92Formulations of zinc;manganese(2+);N-[2-(sulfidocarbothioylamino)ethyl]carbamodithioate (Mancozeb) (CAS No. '01'7) and 2,4,5,6-tetrachlorobenzene-1,3-dicarbonitrile (Chlorothalonil) (CAS No. '45'6) (provided for in subheading .92.15)FreeNo changeNo changeOn or before 12/31/

.

.

Mixtures of Picarbutrox and application adjuvants

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.93Mixtures of tert-butyl N-[6-[[(Z)-[(1-methyltetrazol-5-yl)-phenylmethylidene]amino]oxymethyl]pyridin-2-yl]carbamate (Picarbutrox) (CAS No. '04'5) and application adjuvants (provided for in subheading .92.15)FreeNo changeNo changeOn or before 12/31/

.

.

Mixtures of Tetraconazole and application adjuvants

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.94Mixtures of 1-[2-(2,4-dichlorophenyl)-3-(1,1,2,2-tetrafluoroethoxy)propyl]-1,2,4-triazole (Tetraconazole) (CAS No. '77'3) and application adjuvants (provided for in subheading .92.15) FreeNo changeNo changeOn or before 12/31/

.

.

Mancozeb and Azoxystrobin formulations

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.95Formulations containing zinc;manganese(2+);N-[2-(sulfidocarbothioylamino)ethyl]carbamodithioate (Mancozeb) (CAS No. '01'7) and methyl (E)-2-[2-[6-(2-cyanophenoxy)pyrimidin-4-yl]oxyphenyl]-3-methoxyprop-2-enoate (Azoxystrobin) (CAS No. '33'8) (provided for in subheading .92.28) FreeNo changeNo changeOn or before 12/31/

.

.

Mixtures of Cymoxanil and fumed dioxosilane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.96Mixtures of (1E)-2-(ethylcarbamoylamino)-N-methoxy-2-oxoethanimidoyl cyanide (Cymoxanil) (CAS No. '95'7), fumed dioxosilane (CAS No. '52'5), and application adjuvants (provided for in subheading .92.30) FreeNo changeNo changeOn or before 12/31/

.

.

Microthiol formulations

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.97Formulations of micronized sulfur (CAS No. '34'9) (provided for in subheading .92.30) FreeNo changeNo changeOn or before 12/31/

.

.

Formulations of thiencarbazone-methyl, Iodosulfuron-methyl-sodium, and dicamba

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.98Product mixtures containing methyl 4-[(3-methoxy-4-methyl-5-oxo-1,2,4-triazole-1-carbonyl)sulfamoyl]-5-methylthiophene-3-carboxylate (Thiencarbazone-methyl) (CAS No. '83'1); sodium;(5-iodo-2-methoxycarbonylphenyl)sulfonyl-[(4-methoxy-6-methyl-1,3,5-triazin-2-yl)carbamoyl]azanide (Iodosulfuron-methyl-sodium) (CAS No. '36'7) and 3,6-dichloro-2-methoxybenzoic acid (Dicamba) (CAS No.'00'9) (provided for in subheading .93.15) FreeNo changeNo changeOn or before 12/31/

.

.

Thiencarbazone-methyl, Isoxadifenethyl, and Tembotrione herbicides

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.23.99Methyl 4-[(3-methoxy-4-methyl-5-oxo-1,2,4-triazole-1-carbonyl)sulfamoyl]-5-methylthiophene-3-carboxylate (Thiencarbazone-methyl) (CAS No. '83'1), ethyl 5,5-diphenyl-4H-1,2-oxazole-3-carboxylate (Isoxadifen-ethyl) (CAS No. '33'0) and 2-[2-chloro-4-methylsulfonyl-3-(2,2,2-trifluoroethoxymethyl)benzoyl]cyclohexane-1,3-dione (Tembotrione) (CAS No. '84'2) (provided for in subheading .93.15) FreeNo changeNo changeOn or before 12/31/

.

.

Herbicides used on grasses

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.01 Product mixtures containing ethyl (2R)-2-[4-[(6-chloro-1,3-benzoxazol-2-yl)oxy]phenoxy]propanoate (Fenoxaprop-ethyl) (CAS No. '80'2) (provided for in subheading .93.15) FreeNo changeNo changeOn or before 12/31/

.

.

Thiencarbazone-methyl, Isoxaflutole, and Cyprosulfamide herbicides

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.02Product mixtures containing methyl 4-[(3-methoxy-4-methyl-5-oxo-1,2,4-triazole-1-carbonyl)sulfamoyl]-5-methylthiophene-3-carboxylate (Thiencarbazone-methyl) (CAS No. '83'1); (5-cyclopropyl-1,2-oxazol-4-yl)-[2-methylsulfonyl-4-(trifluoromethyl)phenyl]methanone (Isoxaflutole) (CAS No. '29'0) and N-[4-(cyclopropylcarbamoyl)phenyl]sulfonyl-2-methoxybenzamide (Cyprosulfamide) (CAS No. '31'8) (provided for in subheading .93.15) 5%No changeNo changeOn or before 12/31/

.

.

Thiencarbazone-methyl and Iodosulfuron-methylsodium herbicides

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.03Product mixtures containing methyl 4-[(3-methoxy-4-methyl-5-oxo-1,2,4-triazole-1-carbonyl)sulfamoyl]-5-methylthiophene-3-carboxylate (Thiencarbazone-methyl) (CAS No. '83'1) and sodium (5-iodo-2-methoxycarbonylphenyl)sulfonyl-[(4-methoxy-6-methyl-1,3,5-triazin-2-yl)carbamoyl]azanide (Iodosulfuron methylsodium) (CAS No. '36'7) (provided for in subheading .93.15) FreeNo changeNo changeOn or before 12/31/

.

.

Thiencarbazone-methyl and Mefenpyr-diethyl herbicides

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.04Product mixtures containing methyl 4-[(3-methoxy-4-methyl-5-oxo-1,2,4-triazole-1-carbonyl)sulfamoyl]-5-methylthiophene-3-carboxylate (Thiencarbazone-methyl) (CAS No. '83'1) and diethyl 1-(2,4-dichlorophenyl)-5-methyl-4H-pyrazole-3,5-dicarboxylate (Mefenpyr-diethyl) (CAS No. '91'9) (provided for in subheading .93.15) FreeNo changeNo changeOn or before 12/31/

.

.

Thifensulfuron-methyl and Tribenuron-methyl formulations

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.05Formulations of methyl 3-[(4-methoxy-6-methyl-1,3,5-triazin-2-yl) carbamoylsulfamoyl]thiophene-2-carboxylate (Thifensulfuron-methyl) (CAS No. '27'3) and methyl 2-[[(4-methoxy-6-methyl-1,3,5-triazin-2-yl)-methylcarbamoyl]sulfamoyl]benzoate (Tribenuron-methyl) (CAS No. '48'0) and application adjuvants (provided for in subheading .93.15) FreeNo changeNo changeOn or before 12/31/

.

.

Tribenuron-methyl formulations

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.06Formulations of methyl 2-[[(4-methoxy-6-methyl-1,3,5-triazin-2-yl)-methylcarbamoyl]sulfamoyl]benzoate (Tribenuron-methyl) (CAS No. '48'0) and application adjuvants (provided for in subheading .93.15) FreeNo changeNo changeOn or before 12/31/

.

.

Chlorsulfuron and metsulfuron-methyl formulations

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.07Formulations of 1-(2-chlorophenyl)sulfonyl-3-(4-methoxy-6-methyl-1,3,5-triazin-2-yl)urea (Chlorsulfuron) (CAS No. '72'3), methyl 2-[(4-methoxy-6-methyl-1,3,5-triazin-2-yl)carbamoylsulfamoyl] benzoate (Metsulfuron Methyl) (CAS No. '64'6) and application adjuvants (provided for in subheading .93.15) FreeNo changeNo changeOn or before 12/31/

.

.

Thifensulfuron-methyl and Fluroxypyr formulations

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.08Formulations of methyl 3-[(4-methoxy-6-methyl-1,3,5-triazin-2-yl) carbamoylsulfamoyl]thiophene-2-carboxylate (Thifensulfuron-methyl) (CAS No. '27'3), 2-(4-amino-3,5-dichloro-6-fluoropyridin-2-yl)oxyacetic acid (Fluroxypyr) (CAS No. '81'7) and application adjuvants (provided for in subheading .93.15) FreeNo changeNo changeOn or before 12/31/

.

.

Aciflurofen formulations

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.09Formulations of sodium;5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoate (Aciflurofen) (CAS No. '59'9) (provided for in subheading .93.15) FreeNo changeNo changeOn or before 12/31/

.

.

S-Metolachlor and Mestrione herbicides

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.10Formulations of 2-chloro-N-(2-ethyl-6-methylphenyl)-N-[(2S)-1-methoxypropan-2-yl]acetamide (S-Metolachlor) (CAS No. '12'9) and 4-amino-6-tert-butyl-3-methylsulfanyl-1,2,4-triazin-5-one (Mestrione) (CAS No. '64'9) (provided for in subheading .93.15) FreeNo changeNo changeOn or before 12/31/

.

.

Metribuzin formulations

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.11Formulations of 4-amino-6-tert-butyl-3-methylsulfanyl-1,2,4-triazin-5-one (Metribuzin) (CAS No. '64'9) (provided for in subheading .93.15) FreeNo changeNo changeOn or before 12/31/

.

.

Pendimethaline and Metribuzine formulations

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.12Formulations of 3,4-dimethyl-2,6-dinitro-N-pentan-3-ylaniline (Pendimethaline) (CAS No. '42'1) and 4-amino-6-tert-butyl-3-methylsulfanyl-1,2,4-triazin-5-one (Metribuzine) (CAS No. '64'9) (provided for in subheading .93.15) FreeNo changeNo changeOn or before 12/31/

.

.

Formulations of S-Metolachlor and Metribuzin

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.13Formulations of 2-chloro-N-(2-ethyl-6-methylphenyl)-N-[(2S)-1-methoxypropan-2-yl]acetamide (S-Metolachlor) (CAS No. '12'9) and 4-amino-6-tert-butyl-3-methylsulfanyl-1,2,4-triazin-5-one (Metribuzin) (CAS No. '64'9) (provided for in subheading .93.15) FreeNo changeNo changeOn or before 12/31/

.

.

Thifensulfuron-methyl and Tribenuron-methyl formulations

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.14Formulations of methyl 2-[[(4-methoxy-6-methyl-1,3,5-triazin-2-yl)-methylcarbamoyl] sulfamoyl]benzoate (Tribenuron-methyl) (CAS No. '48'0) and 3-[(4-methoxy-6-methyl-1,3,5-triazin-2-yl)carbamoylsulfamoyl] thiophene-2-carboxylic acid (Thifensulfuron) (CAS No. '67'1) and application adjuvants (provided for in subheading .93.15) FreeNo changeNo changeOn or before 12/31/

.

.

Metsulfuron-methyl formulations

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.15Formulations of methyl 2-[(4-methoxy-6-methyl-1,3,5-triazin-2-yl) carbamoylsulfamoyl]benzoate (Metsulfuron-methyl) (CAS No. '64'6) and application adjuvants (provided for in subheading .93.15) FreeNo changeNo changeOn or before 12/31/

.

.

Chlorimuron-ethyl formulations

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.16Formulations of ethyl 2-[(4-chloro-6-methoxypyrimidin-2-yl)carbamoylsulfamoyl] benzoate (Chlorimuron-ethyl) (CAS No. '32'4) and application adjuvants (provided for in subheading .93.15) FreeNo changeNo changeOn or before 12/31/

.

.

Mixtures of Bromoxynil octanoate and Bromoxynil heptanoate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.17Mixtures of 2,6-dibromo-4-cyanophenyl octanoate (Bromoxynil octanoate) (CAS No. '99'2) and 2,6-dibromo-4-cyanophenyl heptanoate (Bromoxynil heptanoate) (CAS No. '95'8) (provided for in subheading .93.15) FreeNo changeNo changeOn or before 12/31/

.

.

Sulfometuron-methyl and Metsulfuron-methyl formulations

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.18Formulations of methyl 2-[(4,6-dimethylpyrimidin-2-yl)carbamoylsulfamoyl] benzoate (Sulfometuron-methyl) (CAS No. '97'2) and methyl 2-[(4-methoxy-6-methyl-1,3,5-triazin-2-yl)carbamoylsulfamoyl] benzoate (Metsulfuron-methyl) (CAS No. '64'6) and application adjuvants (provided for in subheading .93.15) FreeNo changeNo changeOn or before 12/31/

.

.

Chlorimuron-ethyl and Tribenuron-methyl formulations

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.19Formulations of ethyl 2-[(4-chloro-6-methoxypyrimidin-2-yl)carbamoylsulfamoyl] benzoate (Chlorimuron-ethyl) (CAS No. '32'4) and methyl 2-[[(4-methoxy-6-methyl-1,3,5-triazin-2-yl)-methylcarbamoyl]sulfamoyl] benzoate (Tribenuron-methyl) (CAS No. '48'0) and application adjuvants (provided for in subheading .93.15) FreeNo changeNo changeOn or before 12/31/

.

.

Formulations containing Tiafenacil

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.20Formulations containing methyl 3-[2-[2-chloro-4-fluoro-5-[3-methyl-2,6-dioxo-4-(trifluoromethyl)pyrimidin-1-yl]phenyl] sulfanylpropanoylamino]propanoate (Tiafenacil) (CAS No. '29'9) (provided for in subheading .93.15) 0.9%No changeNo changeOn or before 12/31/

.

.

Diuron 80

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.21Formulated products containing mixtures of 3-(3,4-dichlorophenyl)-1,1-dimethylurea (CAS No. 330'54'1) and application adjuvants (provided for in subheading .93.15) FreeNo changeNo changeOn or before 12/31/

.

.

Flazasulfuron herbicides

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.22Formulations of 1-(4,6-dimethoxypyrimidin-2-yl)-3-[3-(trifluoromethyl)pyridin-2-yl]sulfonylurea (Flazasulfuron) (CAS No. '78'0) (provided for in subheading .93.15) FreeNo changeNo changeOn or before 12/31/

.

.

Thifensulfuron-methyl formulations

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.23Formulations of methyl 3-[(4-methoxy-6-methyl-1,3,5-triazin-2-yl) carbamoylsulfamoyl]thiophene-2-carboxylate (Thifensulfuron-methyl) (CAS No. '27'3) and application adjuvants (provided for in subheading .93.50) FreeNo changeNo changeOn or before 12/31/

.

.

Herbicide for farm and ranch use

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.24Formulations of (RS)-2-Chloro-N-(2-ethyl-6-methyl-phenyl)-N-(1-methoxypropan-2-yl)acetamide (S-metolachlor) (CAS No. '12'9) and ammonium (2RS)-2-amino-4-(methylphosphinato)butyric acid (Glufosinate) (CAS No. '82'2) (provided for in subheading .93.50) FreeNo changeNo changeOn or before 12/31/

.

.

Propanil formulations

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.25Formulations of N-(3,4-dichlorophenyl)propanamide (Propanil) (CAS No. 709'98'8) (provided for in subheading .93.50) FreeNo changeNo changeOn or before 12/31/

.

.

Thifensulfuron formulations

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.26Formulations of 3-[(4-methoxy-6-methyl-1,3,5-triazin-2-yl)carbamoylsulfamoyl] thiophene-2-carboxylic acid (Thifensulfuron) (CAS No. '67'1) and application adjuvants (provided for in subheading .93.50) FreeNo changeNo changeOn or before 12/31/

.

.

Tolpyralate and Nicosulfuron herbicides

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.27Formulations of (RS)-1-{1-ethyl-4-[4-mesyl-3-(2-methoxyethoxy)-o-toluoyl]pyrazol-5-yloxy}ethyl methyl carbonate (Tolpyralate) (CAS No. '67'5) and 2-[(4,6-dimethoxypyrimidin-2-yl)carbamoylsulfamoyl]-N,N-dimethylpyridine-3-carboxamide (Nicosulfuron) (CAS No. '09'4) (provided for in subheading .93.50) FreeNo changeNo changeOn or before 12/31/

.

.

Mixtures of magnesium salts and application adjuvants

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.28Mixtures of magnesium dinitrate (CAS No. '60'3), 5-chloro-2-methyl-1,2-thiazol-3-one (CAS No. '55'4), 2-methyl-1,2-thiazol-3-one (CAS No. '20'4), magnesium dichloride (CAS No. '30'3), and application adjuvants (provided for in subheading .94.50) FreeNo changeNo changeOn or before 12/31/

.

.

Nisin formulations

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.29Nisin preparations including 2.5 percent Nisin and 92 percent salt (CAS No. '45'5) (provided for in subheading .99.95) FreeNo changeNo changeOn or before 12/31/

.

.

Certain fixatives

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.30Dye fixative used in the textile industry containing benzenesulfonic acid, hydroxy-, sodium salt (1:1), polymer with formaldehyde and 4,4'-sulfonylbis(phenol) (CAS No. '81'0) (provided for in subheading .91.00) FreeNo changeNo changeOn or before 12/31/

.

.

Fuel oil additives: cold flow improvers containing poly(ethylene-co-ethenyl acetate)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.31Mixtures containing poly(ethylene-co-ethenyl acetate) (CAS No. '78'8) used as a cold flow improver for fuel oils (provided for in subheading .90.00) FreeNo changeNo changeOn or before 12/31/

.

.

Fuel oil additives: cold flow improvers containing fumarate vinyl acetate co-polymer

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.32Mixtures containing fumarate vinyl acetate co-polymer (CAS No. '13'2) used as a cold flow improver for fuel oils (provided for in subheading .90.00) FreeNo changeNo changeOn or before 12/31/

.

.

Crude oil additives: cold flow improvers containing fumarate vinyl acetate copolymer

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.33Mixtures containing fumarate vinyl acetate copolymer (CAS No. '15'4 or '14'3) used as a cold flow improver for crude oil (provided for in subheading .90.00) FreeNo changeNo changeOn or before 12/31/

.

.

Pour point depressants

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.34Mixtures containing hydrophobic acrylic polymer (CAS No. '57'8) used as a pour point depressant for crude oil (provided for in subheading .90.00) FreeNo changeNo changeOn or before 12/31/

.

.

Fuel oil additives: cold flow improvers containing poly (ethylene-co-ethenyl acetate and vinyl 2-ethyl hexanoate)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.35Mixtures containing poly (ethylene-co-ethenyl acetate and vinyl 2-ethyl hexanoate) (CAS No. '75'4) used as a cold flow improver for fuel oil (provided for in subheading .90.00) FreeNo changeNo changeOn or before 12/31/

.

.

Poly(isobutylene) hydroformylation products

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.36Mixtures consisting of poly(isobutylene) hydroformylation products, reaction products with ammonia (CAS No. '30'3), used in the production of gasoline detergent additive packages (provided for in subheading .90.00) 5%No changeNo changeOn or before 12/31/

.

.

Input for rubber products

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.37Mixtures of 3-(3,4-dichlorophenyl)-1,1-dimethylurea (CAS No. 330'54'1) with acrylate rubber (provided for in subheading .10.10) FreeNo changeNo changeOn or before 12/31/

.

.

Mixtures of oligomers as general antioxidants for rubber tires

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.38Mixtures of oligomers of 2,2,4-trimethyl-1,2-dihydroquinoline (CAS Nos. 147'47'7 and '96'1) as general antioxidants for rubber tires (provided for in subheading .31.00) 4.4%No changeNo changeOn or before 12/31/

.

.

Benzene, 2,4-diisocyanato-1,3,5-tris(1-methylethyl)-, homopolymer

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.39Benzene, 2,4-diisocyanato-1,3,5-tris(1-methylethyl)-, homopolymer (CAS No. '44'8) (provided for in subheading .39.60) FreeNo changeNo changeOn or before 12/31/

.

.

Aromatic amine antioxidants

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.40Aromatic amine liquid antioxidants for various polymers consisting of benzenamine, N-phenyl-, reaction products with 2,4,4-trimethylpentene (CAS No. '46'1) (provided for in subheading .39.60) FreeNo changeNo changeOn or before 12/31/

.

.

Antioxidant blends

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.41Antioxidant blends for polymers consisting of tetrakismethylene (3, 5-di-t-butyl-4-hydroxyhydrocinnamate) methane (CAS No. '19'8) and tris (2, 4-di-t-butylphenyl) phosphite (CAS No. '04'4) (provided for in subheading .39.60) FreeNo changeNo changeOn or before 12/31/

.

.

Antioxidant blends to protect polymers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.42Antioxidant blends for polymers consisting of N, N'-hexamethylene bis[3-(3,5-di-t-butyl-4-hydroxyphenyl)propionamide] (CAS No. '74'7) and tris (2, 4-di-t-butylphenyl) phosphite (CAS No. '04'4) (provided for in subheading .39.60) FreeNo changeNo changeOn or before 12/31/

.

.

Synthetic hydrotalcite coated with fatty acid and magnesium stearate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.43Polyvinyl chloride stabilizers consisting of magnesium aluminum hydroxide carbonate (synthetic hydrotalcite) (CAS No. '59'9) coated with fatty acids (CAS No. '03'5) and magnesium stearate (CAS No. '63'9) (provided for in subheading .39.90) 1.7%No changeNo changeOn or before 12/31/

.

.

Silica scorch retarders and polymerization inhibitors

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.44Mixtures of precipitated silica gel (CAS No. '00'8) and (4-hydroxy-2,2,6,6-tetramethyl-1-piperidinyl)oxidanyl (CAS No. '96'2) of a kind used as polymerization inhibitors (provided for in subheading .39.90) FreeNo changeNo changeOn or before 12/31/

.

.

Synthetic hydrotalcite

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.45Magnesium aluminum hydroxide carbonate (synthetic hydrotalcite) (CAS No. '59'9) coated with a vegetable-based (palm oil) stearic acid (provided for in subheading .39.90) 1.6%No changeNo changeOn or before 12/31/

.

.

Light stabilizers for construction products

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.46Hindered amine light stabilizers for polypropylene, polyvinyl chloride and other similar goods, the foregoing consisting of 1,6-hexanediamine, N,N'-bis(2,2,6,6-tetramethyl-4-piperidinyl)-, polymer with 2,4,6-trichloro-1,3,5-triazine, reaction products with N-butyl-1-butanamine and N-butyl-2,2,6,6-tetramethyl-4-piperidinamine (CAS No. '64'7) (provided for in subheading .39.90) FreeNo changeNo changeOn or before 12/31/

.

.

Light stabilizer for plastics

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.47Light stabilizer for plastics containing a mixture of (2,2,6,6-tetramethy, 4-piperidinyl) polymer in 50 percent polypropylene (CAS No. '45'8); 2,2,6,6-tetramethylpiperidin-4-yl) octadecanoate (CAS No. '06'0) and 2,2,6,6-tetramethylpiperidin-4-ol (CAS No. '88'5) (provided for in subheading .39.90) FreeNo changeNo changeOn or before 12/31/

.

.

Preparations of bis(2,4'dichlorobenzoyl) peroxide 50 percent paste

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.48Preparations each used as an initiator (radical source) in the crosslinking of polymers consisting of bis(2,4-dichlorobenzoyl)peroxide (CAS No. 133'14'2) and silicone oil (provided for in subheading .90.50) FreeNo changeNo changeOn or before 12/31/

.

.

Distilled tall oils

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.49Distilled tall oils containing more than 2 percent by weight rosin (CAS No. '26'4) (provided for in subheading .13.00) FreeNo changeNo changeOn or before 12/31/

.

.

Pyridine, alkyl derivatives

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.50Pyridine, alkyl derivatives (CAS No. '11'7) (provided for in subheading .99.28) FreeNo changeNo changeOn or before 12/31/

.

.

Polyisocyanate crosslinking agents

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.51Polyisocyanate crosslinking agent tris(4-isocyanatophenoxy)-sulfanylidene-λ5-phosphane (CAS No. '51'3) (provided for in subheading .99.28) FreeNo changeNo changeOn or before 12/31/

.

.

Bonding agent mixtures

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.52Mixture of phenol;propane-1-sulfonic acid (CAS No. '94'9) and 1,3-diisocyanato-2-methylbenzene;2,4-diisocyanato-1-methylbenzene (CAS No. '61'3) (provided for in subheading .99.28) FreeNo changeNo changeOn or before 12/31/

.

.

Liquid, chemically modified amine complex of boron trifluoride

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.53Liquid, chemically modified amine complex of (benzylamine)trifluoroboron (CAS No. 696'99'1) (provided for in subheading .99.28) FreeNo changeNo changeOn or before 12/31/

.

.

Phthalocyanine derivative

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.541-Octadecanaminium, N,N-dimethyl-N-octadecyl-, (Sp-4-2)-[29H,31H-phthalocyanine-2-sulfonato(3-)-κN29, κN30, κN31, κN32]cuprate(1-) (CAS No. '63'9) (provided for in subheading .99.28)FreeNo changeNo changeOn or before 12/31/

.

.

Mixtures of Cocamidopropyl betaine, glycol distearate, Laureth-4, and water

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.55Mixtures of 2-[3-(dodecanoylamino)propyl-dimethylazaniumyl]acetate (Cocamidopropyl betaine) (CAS No. '40'0); fatty acids, C16'18, esters with ethylene glycol (glycol distearate) (CAS No. '31'1); alcohols C12'14, ethoxylated (Laureth-4) (CAS No. '50'9) and oxidane (water) (CAS No. '18'5) (provided for in subheading .99.41) FreeNo changeNo changeOn or before 12/31/

.

.

Mixtures of tall oil mono-, di-, and triglycerides

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.56Mixtures of tall oil mono-, di-, and triglycerides of a kind used for fuel additives (CAS No. '02'6) (provided for in subheading .99.41) FreeNo changeNo changeOn or before 12/31/

.

.

Tallow-bis(2-hydroxyethyl) amines

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.57Mixtures of fatty substances of animal origin containing 50 percent by weight of 2-(2-hydroxyethylamino)ethanol on a polyethylene carrier (provided for in subheading .99.41) FreeNo changeNo changeOn or before 12/31/

.

.

Additive mixtures for metalworking fluids

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.58Additive mixtures for metalworking fluids of 2-[dimethyl(propyl)azaniumyl]ethyl-[2-[2-[2-[2-[2-[2-[2-methoxyethyl(dimethyl)azaniumyl]ethyl-dimethylazaniumyl]ethoxy]ethyl-dimethylazaniumyl]ethyl-dimethylazaniumyl]ethoxy]ethyl]-dimethylazanium;hexachloride (CAS No. '24'8) (provided for in subheading .99.55) FreeNo changeNo changeOn or before 12/31/

.

.

Naphthenic acids

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.59Naphthenic acids composed of 3-(3-ethylcyclopentyl)propanoic acid (CAS No. '24'5) having an acidic fraction greater than 70 percent (provided for in subheading .99.75) FreeNo changeNo changeOn or before 12/31/

.

.

Hydroxytyrosol powders

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.60Mixtures containing (2R,3S,4R,5R)-2,3,4,5,6-pentahydroxyhexanal (CAS No. '36'6 (less than 90 percent by weight)) and 4-(2-hydroxyethyl)benzene-1,2-diol (CAS No. '60'1 (less than 25 percent by weight)) (provided for in subheading .99.92) FreeNo changeNo changeOn or before 12/31/

.

.

Secondary alcohol ethoxylates

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.61Mixtures of C12'14-secondary ethoxylated alcohols with an average of less than 5 ethylene oxide monomer units (CAS No. '50'6) (provided for in subheading .99.92) 2.8%No changeNo changeOn or before 12/31/

.

.

Ethylene glycol dimerate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.62Mixtures containing fatty acid polymer of a kind used as fuel additives (fatty acids, C18-unsaturated, dimers, polymers with ethylene glycol) (CAS No. '28'0) (provided for in subheading .99.92)FreeNo changeNo changeOn or before 12/31/

.

.

Two-part liquid silicone kits

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.63Two-part liquid silicone kits (parts A and B) containing 58 to 70 percent by weight aluminum oxide (CAS No. '28'1) treated with tetrapropyl silicate (CAS No. 682'01'9), 10 to 20 percent by weight ethenyl-[ethenyl(dimethyl)silyl]oxy-dimethylsilane (CAS No. '19'2), 5 to 15 percent by weight [dimethyl(trimethylsilyloxy)silyl]oxy-ethenyl-methyl-trimethylsilyloxysilane (CAS No. '94'1), 5 to 15 percent by weight iron oxide (CAS No. '37'1), 1 to 3 percent by weight bis(dimethylsilyloxy)-dimethylsilane (CAS No. '21'9) and 1 to 3 percent by weight silica, [(ethenyldimethylsilyl)oxy]- and [(trimethylsilyl)oxy]-modified (CAS No. '89'6) (provided for in subheading .99.92)FreeNo changeNo changeOn or before 12/31/

.

.

Hydrophobic precipitated silica

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.64Siloxanes and silicones, di-methyl, reaction products with silica (CAS No. '90'7) (provided for in subheading .99.92)FreeNo changeNo changeOn or before 12/31/

.

.

Silane, trimethoxyoctyl-, hydrolysis products

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.65Dioxosilane; trimethoxy(octyl)silane (CAS No. '60'9) (provided for in subheading .99.92)FreeNo changeNo changeOn or before 12/31/

.

.

1,1,1-Trimethyl-N-(trimethylsilyl)silanamine hydrolysis products

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.661,1,1-Trimethyl-N-(trimethylsilyl)silanamine hydrolysis products with silica and 3-(triethoxysilyl)-1-propanamine (CAS No. '44'3) (provided for in subheading .99.92)FreeNo changeNo changeOn or before 12/31/

.

.

Waterborne epoxy curing agents

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.67Waterborne epoxy curing agents based on cycloaliphatic amine technology containing (3-aminimethyl-3,5,5-trimethylcyclohexylamine) (CAS No. '2) (provided for in subheading .99.92)FreeNo changeNo changeOn or before 12/31/

.

.

Preparations based on 1-phenylicosane-1,3-dione

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.68Preparations based on 1-phenylicosane-1,3-dione (CAS No. '52'9) (provided for in subheading .99.92)FreeNo changeNo changeOn or before 12/31/

.

.

Mixtures of 2-Mercaptopropionic acid, methyl ester, O-ethyl dithiocarbonate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.69Mixtures of methyl 2-ethoxycarbothioylsulfanylpropanoate (CAS No. '23'1); heptane (CAS No. 142'82'5) and methanedithione (CAS No. 75'15'0) (provided for in subheading .99.92)FreeNo changeNo changeOn or before 12/31/

.

.

Epoxy curing agents

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.70Epoxy curing agent mixtures of linseed oil polymer with bisphenol A, bisphenol A diglycidyl ether, diethylenetriamine, formaldehyde, glycidyl phenyl ether and pentaethylenehexamine (CAS No. '81'1) (provided for in subheading .99.92)FreeNo changeNo changeOn or before 12/31/

.

.

Aliphatic amine curing agents

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.71[3-(Aminomethyl)phenyl]methanamine (CAS No. '55'0) (provided for in subheading .99.92)FreeNo changeNo changeOn or before 12/31/

.

.

Non-halogenated flame retardants

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.72Non-halogenated flame retardants based on organic phosphinates aluminum;diethylphosphinate (CAS No. '38'8) phosphonic acid, aluminum salt (3:2) (CAS No. '23'1) (provided for in subheading .99.92)FreeNo changeNo changeOn or before 12/31/

.

.

Ligaphob N 90

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.73Fatty acids, C16'18 and C18'unsaturated, sodium salts (CAS No. '26'0) (provided for in subheading .99.92)FreeNo changeNo changeOn or before 12/31/

.

.

Organomodified siloxane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.74Mixtures of poly[oxy(methyl-1,2-ethanediyl)], α-butyl-ω-hydroxy- (CAS No. '13'8); polysiloxanes, di-Me, hydroxy-terminated, ethoxylated propoxylated (CAS No. '23'7); and oxirane, 2-methyl-, polymer with oxirane (CAS No. '11'6) (provided for in subheading .99.92)FreeNo changeNo changeOn or before 12/31/

.

.

Methyl palmitate-stearate, hydrogenated

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.75Fatty acids, C16'18, methyl esters (methyl palmitate-stearate, hydrogenated) (CAS No. '21'6) (provided for in subheading .99.92)FreeNo changeNo changeOn or before 12/31/

.

.

Olfine E

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.76Mixtures of ethane-1,2-diol;2,4,7,9-tetramethyldec-5-yne-4,7-diol (CAS No. '85'1) (provided for in subheading .99.92)1%No changeNo changeOn or before 12/31/

.

.

Certain non-halogenated flame retardants

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.77Non-halogenated flame retardants based on organic phosphinates aluminum;diethylphosphinate (CAS No. '38'8) phosphoric acid;1,3,5-triazine-2,4,6-triamine (CAS No. '84'4) (provided for in subheading .99.92)FreeNo changeNo changeOn or before 12/31/

.

.

Flame retardants

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.78Non-halogenated flame retardant based on organic phosphinates aluminum;diethylphosphinate (CAS No. '38'8) phosphoric acid;1,3,5-triazine-2,4,6-triamine (CAS No. '84'4) boron zinc oxide (CAS No. '90'7) (provided for in subheading .99.92)FreeNo changeNo changeOn or before 12/31/

.

.

Preparations based on acetyl hexapeptide-8 and pentapeptide-18

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.79Mixtures of propane-1,2,3-triol (CAS No. 56'81'5); (4S)-4-acetamido-5-[[(2S)-1-[[(2S)-1-[[(2S)-5-amino-1-[[(2S)-1-[[(2S)-1-amino-5-(diaminomethylideneamino)-1-oxopentan-2-yl]amino]-5-(diaminomethylideneamino)-1-oxopentan-2-yl]amino]-1,5-dioxopentan-2-yl]amino]-4-methylsulfanyl-1-oxobutan-2-yl]amino]-4-carboxy-1-oxobutan-2-yl]amino]-5-oxopentanoic acid (CAS No. '22'9); L-tyrosyl-D-alanylglycyl-L-phenylalanyl-L-leucine (CAS No. '01'5); 2-hydroxypropane-1,2,3-tricarboxylic acid hydrate (CAS No. '29'1); octane-1,2-diol (CAS No. -86-8) and water (CAS No. '18'5) (provided for in subheading .99.92)FreeNo changeNo changeOn or before 12/31/

.

.

Lithium silicon oxide

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.80Lithium poly-silicate (lithium silicon oxide) in dark gray powdered form (CAS No. '14'4) (provided for in subheading .99.92)3.9%No changeNo changeOn or before 12/31/

.

.

Branched olefin from propylene polymerization

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.81Branched olefin from propylene polymerization (12-[(2S,3R)-3-octyloxiran-2-yl]dodecanoic acid) (CAS No. '07'0) (provided for in subheading .10.00), the foregoing other than polypropylene in pellet form, containing 1 percent or more but not over 10 percent by weight of mineral filler (talc) and 10 percent or more but not over 30 percent by weight of carbon powderFreeNo changeNo changeOn or before 12/31/

.

.

Polypropylene pellets

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.82Polypropylene in pellet form, containing 1 percent or more but not over 10 percent by weight of mineral filler (talc) and 10 percent or more but not over 30 percent by weight of carbon powder (CAS No. '07'0) (provided for in subheading .10.00)FreeNo changeNo changeOn or before 12/31/

.

.

Propylene-ethylene copolymer

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.83Poly(propylene-co-ethylene) (CAS No. '79'1) (provided for in subheading .30.00), the foregoing other than ethylene-propylene copolymers containing 50 to 75 percent by weight of propylene 4.9%No changeNo changeOn or before 12/31/

.

.

Ethylene-propylene copolymers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.84Ethylene-propylene copolymers, containing 50 to 75 percent by weight of propylene (CAS No. '79'1) (provided for in subheading .30.00)3.3%No changeNo changeOn or before 12/31/

.

.

Benzene alkylated with polypropylene

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.85Benzene, polypropylene derivatives (CAS No. '77'6) (provided for in subheading .90.00)1.3%No changeNo changeOn or before 12/31/

.

.

Chlorinated polyolefin

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.86Chlorinated polyolefin (1-butene, polymer with ethene and 1-propene, chloro- and tetrahydro-2,5-dioxo-3-furanyl-terminated) (CAS No. '07'3) (provided for in subheading .90.00)FreeNo changeNo changeOn or before 12/31/

.

.

Adsorbent resin

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.87Poly(divinylbenzene-co-ethylstyrene) (CAS No. '77'0) (provided for in subheading .90.50) FreeNo changeNo changeOn or before 12/31/

.

.

Vinyl chloride-hydroxypropyl acrylate copolymer

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.882-Hydroxypropyl prop-2-enoate (acrylate), oxiran-2-ylmethyl 2-methylprop-2-enoate (glycidyl methacrylate), vinyl chloride copolymer (CAS No. '75'6) (provided for in subheading .40.00)FreeNo changeNo changeOn or before 12/31/

.

.

Vinyl chloride ethylene copolymer with hydrophic properties

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.89Mixtures containing by weight less than 70 percent of ethylene-vinyl chloride copolymer (CAS No. '78'9) (provided for in subheading .40.00)FreeNo changeNo changeOn or before 12/31/

.

.

Fluids with boiling points above 170 °C

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.901-Propene, 1,1,2,3,3,3-hexafluoro-, oxidized, polymerized (CAS '67'9) (provided for in subheading .69.50), with boiling point above 170 °CFreeNo changeNo changeOn or before 12/31/

.

.

Formulations of functionalized perfluoropolyether

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.91Ethene, 1,1,2,2-tetrafluoro-, oxidized, polymerized, reduced, fluorinated, ethyl esters, reduced (CAS No. '82'9) (provided for in subheading .69.50)FreeNo changeNo changeOn or before 12/31/

.

.

Perfluoropolyether-urethane acrylate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.92Perfluoropolyether-urethane acrylate (2-propenoic acid, 2-hydroxyethyl ester, reaction products with 5-isocyanato-1-(isocyanatomethyl)-1,3,3-trimethylcyclohexane trimer and reduced Me esters of reduced polymerized, oxidized tetrafluoroethylene) (CAS No. '08'1) present in a quantity comprising 60 percent or more but less than 70 percent by weight, the foregoing dissolved in 0.5 percent or more but less than 1 percent by weight of propan-2-ol (isopropyl alcohol) (CAS No. 67'63'0), 15 percent or more but less than 20 percent by weight of ethyl acetate (CAS No.141'78'6) and 10 percent or more but less than 15 percent by weight of butyl acetate (CAS No.123'86'4) (provided for in subheading .69.50)FreeNo changeNo changeOn or before 12/31/

.

.

PVDF homopolymer/PVDF/CTFE copolymer mixtures

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.93Mixtures of ethene, 1,1-difluoro-, homopolymer (CAS No. '79'9) and ethene, 1-chloro-1,2,2-trifluoro-, polymer with 1,1-difluoroethene (CAS No. '75'7) (provided for in subheading .69.50)FreeNo changeNo changeOn or before 12/31/

.

.

Chemically modified PVDF

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.94Chemically modified ethene, 1,1-difluoro-, homopolymer (CAS No. '79'9) (provided for in subheading .69.50)FreeNo changeNo changeOn or before 12/31/

.

.

Fluoropolymer, fluoroethylene-alkyl vinylether alternative copolymers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.95Chlorotrifluoroethylene-cyclohexyl vinyl ether-hydroxybutyl vinyl ether copolymer in flake or powder form, having a glass transition temperature of 51 °C (CAS No. '13'2) (provided for in subheading .69.50)FreeNo changeNo changeOn or before 12/31/

.

.

Copolymer of vinyl acetate and higher vinyl esters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.96Mixtures containing 50 percent by weight poly(vinyl acetate-co-vinyl laurate) (CAS No. '30'3) and 50 percent by weight bis(2-ethylhexyl) adipate (CAS No. 103'23'1) (provided for in subheading .19.00)FreeNo changeNo changeOn or before 12/31/

.

.

Food-grade vinyl acetate copolymer

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.97Dodecanoic acid, ethenyl ester, polymer with ethenyl acetate (CAS No. '30'3) (provided for in subheading .19.00)FreeNo changeNo changeOn or before 12/31/

.

.

Vinyl chloride ethylene with enhanced properties

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.98Mixtures containing by weight less than 75 percent of ethylene-vinyl acetate-vinyl chloride copolymer (CAS No. '46'5) (provided for in subheading .29.00)FreeNo changeNo changeOn or before 12/31/

.

.

Vinyl acetate ethylene copolymer with enhanced properties

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.24.99Mixtures containing not more than 75 percent by weight of poly(ethylene-co-ethenyl acetate) (CAS No. '78'8), other than in aqueous dispersion (provided for in subheading .29.00)FreeNo changeNo changeOn or before 12/31/

.

.

Food-grade polyvinyl acetate homopolymers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.01Dodecanoic acid, ethenyl ester, polymer with ethenyl acetate (CAS No. '30'3) (provided for in subheading .29.00)FreeNo changeNo changeOn or before 12/31/

.

.

Acrylic acid/vinylsulphonate random copolymers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.02Acrylic acid-sodium vinylsulfonate copolymers, sodium persulfate initiated, reaction product with tetrasodium vinylidene diphosphonic acid (CAS No. '50'7) (provided for in subheading .91.50) FreeNo changeNo changeOn or before 12/31/

.

.

Poly(methyl methacrylate) microspheres

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.03Poly(methyl methacrylate) granular or spherical micro-spheres, each with mean particle size of 1 to 25 µm (CAS No. '14'7) (provided for in subheading .10.00)FreeNo changeNo changeOn or before 12/31/

.

.

Methyl methacrylate crosspolymer microspheres

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.04Composites of methyl methacrylate crosspolymer (methyl 2-methylprop-2-enoate;2-(2-methylprop-2-enoyloxy)ethyl 2-methylprop-2-enoate) (CAS No. '71'3), entirely spherical micro-spheres with mean particle size of 1 to 25 µm and containing 7 to 10 percent by weight of dicalcium phosphate (CAS No. '93'9) (provided for in subheading .10.00)FreeNo changeNo changeOn or before 12/31/

.

.

Styrene acrylate copolymer with enhanced properties

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.05Mixtures containing less than 65 percent by weight of butyl prop-2-enoate;styrene (CAS No. '47'9) (provided for in subheading .90.50)FreeNo changeNo changeOn or before 12/31/

.

.

Copolymer for dental use

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.06Reacted copolymer of itaconic and acrylic acids, containing by weight over 90 percent 2-propenoic acid polymer with methylenebutanedioic acid, and also containing ethyl acetate and tetrahydrofuran (CAS No. '33'8) (provided for in subheading .90.50)FreeNo changeNo changeOn or before 12/31/

.

.

Vinyl phosphonic acid, acrylic acid copolymer, 20 percent solution in water

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.072-Propenoic acid, polymer with p-ethenylphosphonic acid, 20 percent solution in water (CAS No. '88'5) (provided for in subheading .90.50)FreeNo changeNo changeOn or before 12/31/

.

.

Polyacrylate 33

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.08Mixtures of polyacrylate 33 (methyl methacrylate, polymers with ethyl acrylate, polyethylene glycol methacrylate C16'22-alkyl ethers and polyethylene-polypropylene glycol methacrylate 2-(6,6-dimethylbicyclo[3.1.1]hept-2-en-2-yl)ethyl ether) (CAS No. '16'5) and alcohols, C10'16, ethoxylated, sulfates, ammonium salts (CAS No. '19'0) (provided for in subheading .90.50)FreeNo changeNo changeOn or before 12/31/

.

.

AA/AMPS copolymer

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.09Acrylic acid-2-acrylamide-2-methyl propanesulfonic acid copolymer (prop-2-enoic acid;2-(prop-2-enoylamino)butane-2-sulfonic acid) (CAS No. '75'4) in granule form, with a particle size between 250 and 850 µm (provided for in subheading .90.50)FreeNo changeNo changeOn or before 12/31/

.

.

Flocculant dry polyacrylamides

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.10Flocculant dry polyacrylamides (prop-2-enamide) (CAS No. '05'8) (provided for in subheading .90.50)FreeNo changeNo changeOn or before 12/31/

.

.

Sorbitol, propylene oxide, ethylene oxide polymer

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.11Oxirane, 2-methyl-, polymer with oxirane, ether with D-glucitol (6:1) (CAS No. '05'9) (provided for in subheading .20.00)FreeNo changeNo changeOn or before 12/31/

.

.

Trimethoxysilylpropylcarbamate-terminated polyether

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.12Poly[oxy(methyl-1,2-ethanediyl)], α-(((3-(trimethoxysilyl)propyl)amino)carbonyl)-ω-((((3-(trimethoxysilyl)propyl)amino)carbonyl)oxy)- (CAS No. '12'5) (provided for in subheading .20.00)FreeNo changeNo changeOn or before 12/31/

.

.

Dimethoxy(methyl)silylmethylcarbamate-terminated polyether

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.13Poly(oxy(methyl-1,2-ethanediyl)), α-((((dimethoxymethylsilyl) methyl)amino)carbonyl)-ω-(((((dimethoxymethylsilyl) methyl)amino)carbonyl)oxy)-(CAS No. '18'5) (provided for in subheading .20.00)FreeNo changeNo changeOn or before 12/31/

.

.

Curing agent is used in two- or three-parts epoxy systems

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.14Polyoxypropylen glycol diamine ((3S,4S)-pyrrolidine-3,4-diol) (CAS No. '10'0) (provided for in subheading .20.00)FreeNo changeNo changeOn or before 12/31/

.

.

Polyethylene glycol 450

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.15Poly(oxy-1,2-ethanediyl),α-hydro-ω-hydroxy-ethane-1,2-diol, ethoxylated, PEG 450 (CAS No. '68'3) (provided for in subheading .20.00)FreeNo changeNo changeOn or before 12/31/

.

.

Medicinal intermediate for investigational use

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.16Poly(oxy-1,2-ethandiyl), α-[[(2,5-dioxo-1-pyrrolidinyl) oxy]carbonyl]-ω-[[(2,5-dioxo-1-pyrrolinyl)oxy]carbonyl]oxy-(di-NHS PEG40K) (CAS No. '06'8) (provided for in subheading .20.00)FreeNo changeNo changeOn or before 12/31/

.

.

Pegcetacoplan

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.17Poly(oxy-1,2-ethanediyl), α-hydro-ω-hydroxy-, 15,15'-diester with N-acetyl-L-isoleucyl-L-cysteinyl-L-valyl-1-methyl-L-tryptophyl-L-glutaminyl-L-α-aspartyl-L-tryptophylglycyl-L-alanyl-L-histidyl-L-arginyl-L-cysteinyl-L-threonyl-2-[2-(2-aminoethoxy)ethoxy]acetyl-N6-carboxy-L-lysinamide cyclic (2'12)-(disulfide) (Pegcetacoplan) (CAS No. '69'6) (provided for in subheading .20.00)5.9%No changeNo changeOn or before 12/31/

.

.

Aqueous solutions of carboxylic acid-copolymer-salt in water

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.18Aqueous solutions containing by weight more than 35 percent of 2,5-furandione, polymer with α-[4-(ethenyloxy)butyl]-ω-hydroxypoly(oxy-1,2-ethanediyl), sodium salt (CAS No. '55'0) (provided for in subheading .20.00)3%No changeNo changeOn or before 12/31/

.

.

Aqueous solutions of a modified polymer bearing hydrophilic and hydrophobic groups

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.19Aqueous solutions containing by weight more than 40 percent of 2,5-furandione, polymer with ethenylbenzene, hydrolyzed, 3-(dimethylamino)propyl imide, imide with polyethylene-polypropylene glycol 2-aminopropyl me ether, 2,2'-(1,2-diazenediyl)bis(2-methylbutanenitrile)-initiated (CAS No. '13'5) (provided for in subheading .20.00) FreeNo changeNo changeOn or before 12/31/

.

.

Dimethylamine/epichlorohydrin/ethylenediamine copolymer

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.201,2-Ethanediamine, polymer with 2-(chloromethyl)oxirane and N-methylmethanamine (CAS No. '79'1) (provided for in subheading .30.00)FreeNo changeNo changeOn or before 12/31/

.

.

Linear hydroxyl-terminated aliphatic polycarb diol

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.21Poly(dimethyl carbonate-co-1,6-hexanediol) (CAS No. '00'2) (provided for in subheading .40.00)FreeNo changeNo changeOn or before 12/31/

.

.

Short hollow PET fibers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.22Hollow fibers of poly(ethylene terephthalate) (CAS No. '59'9), having a viscosity number of 78 ml/g or higher, each fiber measuring 0.5 mm or more but not more than 5 mm in length (provided for in subheading .61.00)FreeNo changeNo changeOn or before 12/31/

.

.

Polytetrahydrofuran

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.23Polytetrahydrofuran (CAS No. '06'1) (provided for in subheading .99.50)FreeNo changeNo changeOn or before 12/31/

.

.

Crystalline polyesters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.241,4-Benzenedicarboxylic acid, 1,4-dimethyl ester, polymer with 1,4-butanediol and α-hydro-ω-hydroxypoly(oxy-1,4- butanediyl) (CAS No. '71'1) (provided for in subheading .99.50)FreeNo changeNo changeOn or before 12/31/

.

.

Liquid crystal polymers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.251,4-Benzenedicarboxylic acid, polymer with 1,4-butanediol and α-hydro-ω-hydroxypoly(oxy-1,4-butanediyl) (CAS No. '12'5) (provided for in subheading .99.50)FreeNo changeNo changeOn or before 12/31/

.

.

Branched polyesters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.261,3-Benzenedicarboxylic acid, polymer with 1,3-dihydro-1,3-dioxo-5-isobenzofurancarboxylic acid, 1,4-dimethyl 1,4-benzenedicarboxylate, 2,2-dimethyl-1,3-propanediol and 1,2-ethanediol (CAS No. '22'3) (provided for in subheading .99.50)FreeNo changeNo changeOn or before 12/31/

.

.

High molecular weight co-polyester

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.271,4-Benzenedicarboxylic acid, 1,4-dimethyl ester, polymer with 1,4-butanediol and tricyclodecanedimethanol (CAS No. '22'6) (provided for in subheading .99.50)FreeNo changeNo changeOn or before 12/31/

.

.

High molecular weight co-polyester

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.281,3-Benzenedicarboxylic acid polymer with 1,4-benzenedicarboxylic acid, dimethyl ester, 1,4-cyclohexanedimethanol, 2,2-dimethyl-1,3-propanediol and 1,2-ethanediol (CAS No. '60'4) (provided for in subheading .99.50)FreeNo changeNo changeOn or before 12/31/

.

.

Polyester-polyamide dispersants

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.29Dodecanoic acid, reaction products with ethylenimine-2-oxepanone polymer (CAS No. '99'2) (provided for in subheading .99.50)FreeNo changeNo changeOn or before 12/31/

.

.

Nylon-12 micro-spheres

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.30Nylon-12, entirely spherical micro-spheres with mean particle size of 1 to 25 µm (CAS No. '16'4) (provided for in subheading .10.00)FreeNo changeNo changeOn or before 12/31/

.

.

Short nylon-66 fibers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.31Nylon 66 (CAS No. '17'2) fiber, measuring 3.3 decitex or more but not more than 22.2 decitex and having a fiber length each measuring 0.5 mm or more but not over 2 mm (provided for in subheading .10.00)FreeNo changeNo changeOn or before 12/31/

.

.

Short nylon 6 fibers, colored

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.32Nylon 6 (CAS No. '54'4) fibers, colored with pigments, measuring approximately 5.5 or more but not more than 22.2 decitex and having a fiber length each measuring 1 mm or more but not over 5 mm (provided for in subheading .10.00)FreeNo changeNo changeOn or before 12/31/

.

.

Short triangular nylon 6 fibers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.33Triangular nylon 6 (CAS No. '54'4) fibers, measuring 2 or more but not more than 5 decitex and having a fiber length each measuring 0.5 mm or more but not over 2 mm (provided for in subheading .10.00)FreeNo changeNo changeOn or before 12/31/

.

.

Short star-shaped nylon 6 fibers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.34Star-shaped nylon 6 (CAS No. '54'4) fibers, measuring 50 or more but not more than 200 decitex and having a fiber length each measuring 0.5 mm or more but not over 5 mm (provided for in subheading .10.00)FreeNo changeNo changeOn or before 12/31/

.

.

Short heart-shaped nylon 6 fibers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.35Heart-shaped nylon 6 (CAS No. '54'4) fibers, measuring 150 decitex and having a fiber length each measuring 0.5 mm or more but not over 2 mm (provided for in subheading .10.00)FreeNo changeNo changeOn or before 12/31/

.

.

PA510 polymer compounds

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.36Mixtures containing poly(imino-1,5-pentanediylimino(1,10-dioxo-1,10-decanediyl)) PA510 (CAS No. '19'2) (provided for in subheading .90.70)FreeNo changeNo changeOn or before 12/31/

.

.

MXD6 polymer compounds

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.37Compounds in which hexanedioic acid, polymer with 1,3-benzenedimethanamine (MXD6) (CAS No. '70'1) is the predominant polymer resin (provided for in subheading .90.70)2.2%No changeNo changeOn or before 12/31/

.

.

PA10T polymer compounds

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.38Compounds in which poly(iminocarbonyl-1,4-phenylenecarbonylimino-1,10-decanediyl) (PA10T) (CAS No. '74'7) is the predominant polymer resin (provided for in subheading .90.70)FreeNo changeNo changeOn or before 12/31/

.

.

PA10T/10I polymer compounds

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.39Compounds in which poly(iminocarbonyl-1,4-phenylenecarbonylimino-1,10-decanediyl)-co-(iminocarbonyl-1,3-phenylenecarbonylimino-1,10-decanediyl) (PA10T/10I) (CAS No. '15'4) is the predominant polymer resin (provided for in subheading .90.70)FreeNo changeNo changeOn or before 12/31/

.

.

Polyurethane aqueous resins

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.40Butane-1,4-diol;1,6-diisocyanatohexane;hexanedioic acid;5-isocyanato-1-(isocyanatomethyl)-1,3,3-trimethylcyclohexane (CAS No. '19'0) (provided for in subheading .50.20)FreeNo changeNo changeOn or before 12/31/

.

.

Aqueous resin

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.41Hexanedioic acid, polymer with 1,4-butanediol, 1,6-diisocyanatohexane, 1,6-hexanediol and 5-isocyanato-1-(isocyanatomethyl)-1,3,3-trimethylcyclohexane (CAS No. '62'1) (provided for in subheading .50.20)FreeNo changeNo changeOn or before 12/31/

.

.

Aliphatic polyisocyanate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.421,2,3-Propanetriol, polymer with 2,4-diisocyanato-1-methylbenzene, 2-ethyl-2-(hydroxymethyl)-1,3-propanediol, methyloxirane and oxirane (CAS No. '00'5) (provided for in subheading .50.50)FreeNo changeNo changeOn or before 12/31/

.

.

IPDI and HDI based aliphatic polyisocyanate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.43Poly[oxy(methyl-1,2-ethanediyl)], α-hydro-ω-hydroxy-, polymer with 1,6-diisocyanatohexane (CAS No. '90'2) and cyclohexane, 5-isocyanato-1-(isocyanatomethyl)-1,3,3-trimethyl-, (CAS No. '05'0) (provided for in subheading .50.50)FreeNo changeNo changeOn or before 12/31/

.

.

HDI/Trimethylol hexyllactone crosspolymer micro-spheres

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.44Hexamethylene diisocyanate (HDI)/trimethylol hexyllactone crosspolymer (1,6-diisocyanatohexane;2-ethyl-2-(hydroxymethyl)propane-1,3-diol;oxepan-2-one) (CAS No. '76'2), entirely spherical micro-spheres with mean particle size of 1 to 25 µm and coated with 1 to 3 percent by weight of silica (CAS No. '86'9) (provided for in subheading .50.50)FreeNo changeNo changeOn or before 12/31/

.

.

HDI/PPG/Polycaprolactone crosspolymer micro-spheres

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.452-Oxepanone, polymer with 1,6-diisocyanatohexane, 2-ethyl-2-(hydroxymethyl)-1,3-propanediol and α-hydro-ω-hydroxy[poly[oxy(methyl-1,2-ethanediyl)]] ether with D-glucitol (6:1) (CAS No. '95'3), entirely spherical micro-spheres with mean particle size of 3 to 25 µm (provided for in subheading .50.50)FreeNo changeNo changeOn or before 12/31/

.

.

Aromatic isocyanate prepolymer

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.46Isocyanic acid, polymethylenepolyphenylene ester, polymer with 2-methyloxirane and oxirane (CAS No. '05'6) (provided for in subheading .50.50)FreeNo changeNo changeOn or before 12/31/

.

.

Blocked polyisocyanate containing solvent

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.47Phenol, 4,4'-(1-methylethylidene)bis-, polymer with 1,3-diisocyanatomethylbenzene, 1,1'-methylenebis[4-isocyanatobenzene], 2-methyloxirane and 2-methyloxirane polymer with oxirane ether with 1,2,3-propanetriol (3:1), Me Et ketone oxime-blocked (CAS No. '42'9) (provided for in subheading .50.50)FreeNo changeNo changeOn or before 12/31/

.

.

Polyisocyanate adduct for powder coatings

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.481,3-Bis((5-isocyanato-1,3,3-trimethylcyclohexyl)methyl)-1,3-diazetidine-2,4-dione;butane-1,4-diol (CAS No. '34'3) (provided for in subheading .50.50)FreeNo changeNo changeOn or before 12/31/

.

.

Blocked polyisocyanate for use in can and coil applications

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.49Isocyanato-1-(isocyanatomethyl)-1,3,3-trimethylcyclohexane (Isophorone diisocyanante), homopolymer, methyl ethyl ketone oxime-blocked (CAS No. '26'9) (provided for in subheading .50.50)FreeNo changeNo changeOn or before 12/31/

.

.

Polydimethylsiloxane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.50Polydimethylsiloxane (Dimethyl-bis(trimethylsilyloxy)silane) (CAS No. '62'9) (provided for in heading .00.00)FreeNo changeNo changeOn or before 12/31/

.

.

Silicone resins

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.51Siloxanes and silicones, di-Me, polymers with Me PH silsesquioxanes (CAS No. '81'3) (provided for in heading .00.00)FreeNo changeNo changeOn or before 12/31/

.

.

Methoxyfunctional methyl-phenyl polysiloxane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.52Siloxanes and silicones, di-Me, polymers with PH silsesquioxanes, butoxy- and methoxy-terminated (CAS No. '72'5) (provided for in heading .00.00)FreeNo changeNo changeOn or before 12/31/

.

.

Hydrogenpolysiloxane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.53Dimethyl-[methyl(trimethylsilyloxy)silyl]oxy-trimethylsilyloxysilane (CAS No. '59'2) (provided for in heading .00.00)FreeNo changeNo changeOn or before 12/31/

.

.

Methyl silicone resins

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.54Siloxanes and silicones, di-Me, polymers with Me silsesquioxanes, ethoxy-terminated (CAS No. '66'5) (provided for in heading .00.00)FreeNo changeNo changeOn or before 12/31/

.

.

Trimethylsiloxysilicate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.55Trihydroxy(trimethylsilyloxy)silane (CAS No. '01'5) (provided for in heading .00.00)FreeNo changeNo changeOn or before 12/31/

.

.

Epoxy functional polydimethylsiloxane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.56Methoxy-methyl-[3-[3-(oxiran-2-yl)propoxy]propyl]-trimethylsilyloxysilane (CAS No. '71'1) (provided for in heading .00.00)FreeNo changeNo changeOn or before 12/31/

.

.

Polymethylhydrogensiloxane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.57Poly(methylhydrosiloxane) (CAS No. '57'2) (provided for in heading .00.00)FreeNo changeNo changeOn or before 12/31/

.

.

Vinyl terminated siloxanes

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.58Siloxanes and silicones, di-Me, vinyl group-terminated (ethenyl-[ethenyl(dimethyl)silyl]oxy-dimethylsilane) (CAS No. '19'2) (provided for in heading .00.00)FreeNo changeNo changeOn or before 12/31/

.

.

Silicone hybrid resin (solvent free)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.59Mixtures containing 85 percent or more by weight of silsesquioxanes, Me Ph, methoxy-terminated, polymers with epichlorohydrin, 4,4'-(1-methylethylidene)bis[cyclohexanol] and trimethyl (CAS No. '42'4) and 10 percent or less by weight cyclohexanol, 4,4'-(1-methylethylidene)bis-, polymer with 2-(chloromethyl)oxirane (CAS No. '72'3) (provided for in heading .00.00) FreeNo changeNo changeOn or before 12/31/

.

.

Hydrogenated polycyclopentadiene resin

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.60Hydrogenated polycyclopentadiene resin (1,3-Cyclopentadiene homopolymer, hydrogenated) (CAS No. '00'3) (provided for in subheading .10.00)FreeNo changeNo changeOn or before 12/31/

.

.

Water dispersable HDI based polyisocyanate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.61Hexane,1,6-diisocyanato-, homopolymer (CAS No. '81'2) and cyclohexane,5-isocyanato-1-(isocyanatomethyl)-1,3,3-trimethyl-,homopolymer (CAS No. '05'0) (provided for in subheading .90.25)FreeNo changeNo changeOn or before 12/31/

.

.

Cyanate ester resins for high-end electronic, aerospace, and industrial applications

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.62Cyanic acid, C,C'-[(1-methylethylidene)di-4,1-phenylene] ester, homopolymer (CAS No. '66'1) (provided for in subheading .90.45)FreeNo changeNo changeOn or before 12/31/

.

.

Polyethyleneimine, component used in manufacturing medical devices

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.63Polyethylenimine (CAS No. '98'6), of a kind used as a component for further manufacturing into a finished medical device (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Polyhexanide

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.64Poly (hexamethylenebiguanide) hydrochloride (Polyhexanide) (CAS No. '58'0) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Ethylene-norbornene copolymer

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.65Poly(ethylene-ran-(2-norbornene)), substantially amorphous, having a glass transition temperature less than 145 °C (CAS No. '43'2) (provided for in subheading .90.90)FreeNo changeNo changeOn or before 12/31/

.

.

Cellulose powder

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.66Cellulose entirely spherical micro-spheres, each with mean particle size of 1 to 25 µm (CAS No. '34'6) (provided for in subheading .90.00) FreeNo changeNo changeOn or before 12/31/

.

.

Polymaltotriose

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.67Poly[6)-α-D-glucopyranosyl-(1->4)-α-D-glucopyranosyl-(1->4)-α-D-glucopyranosyl-(1->] (Polymaltotriose) (CAS No. '02'7) (provided for in subheading .90.20)1.3%No changeNo changeOn or before 12/31/

.

.

Chitosan

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.68Chitosan (methyl N-[(2S,3R,4R,5S,6R)-5-[(2S,3R,4R,5S,6R)-3-amino-5-[(2S,3R,4R,5S,6R)-3-amino-5-[(2S,3R,4R,5S,6R)-3-amino-5-[(2S,3R,4R,5S,6R)-3-amino-5-[(2S,3R,4R,5S,6R)-3-amino-5-[(2S,3R,4R,5S,6R)-3-amino-4,5-dihydroxy-6-(hydroxymethyl)oxan-2-yl]oxy-4-hydroxy-6-(hydroxymethyl)oxan-2-yl]oxy-4-hydroxy-6-(hydroxymethyl)oxan-2-yl]oxy-4-hydroxy-6-(hydroxymethyl)oxan-2-yl]oxy-4-hydroxy-6-(hydroxymethyl)oxan-2-yl]oxy-4-hydroxy-6-(hydroxymethyl)oxan-2-yl]oxy-2-[(2R,3S,4R,5R,6S)-5-amino-6-[(2R,3S,4R,5R,6R)-5-amino-4,6-dihydroxy-2-(hydroxymethyl)oxan-3-yl]oxy-4-hydroxy-2-(hydroxymethyl)oxan-3-yl]oxy-4-hydroxy-6-(hydroxymethyl)oxan-3-yl]carbamate) (CAS No. '76'4) (provided for in subheading .90.20)FreeNo changeNo changeOn or before 12/31/

.

.

Plastic drinking straws

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.69Drinking straws of plastics, each measuring 8 mm or more in outside diameter and 20 cm or more in length (provided for in subheading .32.00)FreeNo changeNo changeOn or before 12/31/

.

.

Garden hoses

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.70Garden hoses of plastics, constructed with a grade 304 stainless steel interlocking spiral band outer shell, flexible polyvinyl chloride (PVC) inner hose, having aluminum fittings with rubber grips, weighing not more than 2.8 kg, the foregoing whether or not presented with nozzle (provided for in subheading .39.00)FreeNo changeNo changeOn or before 12/31/

.

.

Plastic fittings of perfluoroalkoxy

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.71Plastic fittings of perfluoroalkoxy (PFA), of a kind used principally with machines and apparatus for the manufacture of semiconductors and flat panel displays of heading (provided for in subheading .40.00, .90.99 or .50.00)FreeNo changeNo changeOn or before 12/31/

.

.

Low density polyethylene (LDPE) sheeting

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.72Low density sheeting of polyethylene, measuring in width 3,810 mm, gauge 0.15 mm and length 2,000 meters, translucent solid with waxy color as presented (provided for in subheading .10.00)3.1%No changeNo changeOn or before 12/31/

.

.

Biaxially oriented dielectric polypropylene film

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.73Biaxially oriented dielectric polypropylene film, produced from solvent-washed low ash content (less than 50 ppm) polymer resin (CAS No. '07'0) (provided for in subheading .20.00)FreeNo changeNo changeOn or before 12/31/

.

.

Biaxially oriented polypropylene (BOPP) capacitor-grade film

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.74Transparent coextruded biaxially oriented polypropylene film, capacitor-grade, presented in rolls of a width not exceeding 790 mm and of a thickness not exceeding 15 μm (provided for in subheading .20.00)FreeNo changeNo changeOn or before 12/31/

.

.

Polyester capacitor-grade film

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.75Transparent coextruded biaxially oriented polyester film, capacitor-grade, presented in roll form, of a width not exceeding 790 mm and of a thickness not exceeding 15 μm (provided for in subheading .62.00)FreeNo changeNo changeOn or before 12/31/

.

.

Acid form membranes

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.76Membranes of short side chain (Poly(tetrafluoroethylene-co-perfluoro(3-oxa-4-pentenesulfonic acid)) (CAS No. '25'2) (provided for in subheading .99.20)4.1%No changeNo changeOn or before 12/31/

.

.

Melamine resin foam

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.77Foam of thermoset melamine resin, measuring 1,250 mm or more in width, 500 mm in height and 1,300 mm or more but not more than 3,100 mm in length, with a density not less than 4 and not more than 11 kg/m³ per EN ISO 845 specimen size 250 mm³ (provided for in subheading .19.00)5.4%No changeNo changeOn or before 12/31/

.

.

Infant bathtubs and basins, of plastics

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.78Infant bathtubs and washbasins of plastics, each measuring not over 70 cm in length, 48 cm in width and 29 cm in height (provided for in subheading .10.00)3.4%No changeNo changeOn or before 12/31/

.

.

Boxes, cases, crates, and similar articles of plastics

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.79Boxes, cases, crates and similar articles of plastics (provided for in subheading .10.90), the foregoing specially shaped or fitted for the conveyance of lithography machines, apparatus or parts thereof for the manufacture of semiconductor devices or of electronic integrated circuits of subheading .20.00 or .90.00 FreeNo changeNo changeOn or before 12/31/

.

.

Nozzles, black, of polypropylene

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.80Nozzles of polypropylene, black in color, each measuring 4.5 mm in inside diameter, with an outer diameter of 29 mm and a height of 39.2 mm (provided for in subheading .10.90)FreeNo changeNo changeOn or before 12/31/

.

.

Tip/cap combinations of polyethylene

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.81Tips of low density polyethylene, each measuring 19.1 mm in height, with outer diameter of 18.4 mm, of a capacity of 20 ml and weighing not over 0.9 g; each such tip attached to a cap of high density polyethylene, measuring 16.2 mm, with outer diameter of 18.4 mm and weighing not over 1.3 g (provided for in subheading .10.90)FreeNo changeNo changeOn or before 12/31/

.

.

Bottles made of LDPE

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.82Bottles of low density polyethylene, each measuring 56 mm in height, having an outer diameter of 27 mm, with a bottle neck having an outer diameter of 16.2 mm, of a capacity of 20 ml, weighing not over 4 g (provided for in subheading .30.00)FreeNo changeNo changeOn or before 12/31/

.

.

Plastic nasal irrigator caps for neti pots

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.83Nasal irrigator caps of plastics, designed for use on ceramic neti pots (provided for in subheading .50.00)FreeNo changeNo changeOn or before 12/31/

.

.

Toy character bottle toppers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.84Three-dimensional (3D) toy character bottle toppers of plastics, each consisting of a threaded bottle cap, a straw-like sipper and a 3D children's toy character from children's movies or television programs, having a diameter of at least 32 mm (provided for in subheading .50.00)2.8%No changeNo changeOn or before 12/31/

.

.

Melamine platters, other than those presented in sets

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.85Melamine platters, other than those presented in sets (provided for in subheading .10.20)FreeNo changeNo changeOn or before 12/31/

.

.

Melamine plates, other than those presented in sets

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.86Melamine plates, other than those presented in sets (provided for in subheading .10.20)0.8%No changeNo changeOn or before 12/31/

.

.

Melamine bowls not presented in sets

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.87Melamine bowls, not presented in sets (provided for in subheading .10.20)0.8%No changeNo changeOn or before 12/31/

.

.

Melamine trays not presented in sets

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.88Melamine trays, the foregoing other than those presented in sets (provided for in subheading .10.30)FreeNo changeNo changeOn or before 12/31/

.

.

Plastic measuring cups and spoons in sets

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.89Measuring cups, spoons, or combinations thereof, the foregoing of plastics, designed for table or kitchen use to measure ingredients, such goods presented in sets each containing from 4 to 12 pieces (provided for in subheading .10.40)FreeNo changeNo changeOn or before 12/31/

.

.

Liquid measuring cups

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.90Household kitchen measuring tools, of plastics, designed to be used for liquid ingredients, such goods with measuring size not exceeding 1 liter (provided for in subheading .10.40)FreeNo changeNo changeOn or before 12/31/

.

.

Self-anchoring beverage containers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.91Self-anchoring beverage containers of plastics, each with a base made from orange silicone, such base measuring no more than 60.4 mm (provided for in subheading .10.40)FreeNo changeNo changeOn or before 12/31/

.

.

PVC infant bathtub mats

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.92Polyvinylchloride (PVC) infant bathtub mats, whale-shaped, each with non-slip surface, drainage-allowing perforations and suction cups on the bottom surface, of a length less than 76.2 cm and not over 39.4 cm in width (provided for in subheading .90.10) FreeNo changeNo changeOn or before 12/31/

.

.

Reversible playmats

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.93Printed, cushioned mats, each with core of polyurethane foam and outer layer of thermoplastic polyurethane film, measuring approximately 218.4 cm by 132.1 cm and 11.5 mm in thickness when unrolled (provided for in subheading .90.10)FreeNo changeNo changeOn or before 12/31/

.

.

Craft mats

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.94Craft mats of plastics, made of self-healing polyvinyl chloride designed to protect work surfaces and to withstand multiple cuts and scoring while providing linear and angular dimensioning guidelines for cutting projects (provided for in subheading .90.56)FreeNo changeNo changeOn or before 12/31/

.

.

Hangers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.95Molded plastic hangers of a width not exceeding 6.35 mm, coated or covered with a velvet-like, textile flocking material and incorporating a metal hook (provided for in subheading .90.56)FreeNo changeNo changeOn or before 12/31/

.

.

Infant bath rinsing cups

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.96Infant bath rinsing cups, of polypropylene plastics, each with interior fins and with a soft thermoplastic rubber lip designed to keep water from infant's forehead; not containing bisphenol A (BPA), polyvinyl chloride (PVC) and phthalate (provided for in subheading .90.56)FreeNo changeNo changeOn or before 12/31/

.

.

Bathtub spout covers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.97Whale-shaped adjustable bathtub spout covers, of thermoplastic materials (provided for in subheading .90.56)FreeNo changeNo changeOn or before 12/31/

.

.

Infant teethers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.98Infant teethers of silicone, each measuring not over 10 cm by 10 cm, weighing over 0.05 kg and containing a silicone-encased disk of stainless steel (provided for in subheading .90.56)FreeNo changeNo changeOn or before 12/31/

.

.

Lighted dog fetch toys

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.25.99Molded balls of thermoplastic rubber, with encased light-emitting diode (LED) lights, each battery-operated, measuring 64 mm in diameter, with a hardness of 40 Shore A per ASTM D (provided for in subheading .90.56)FreeNo changeNo changeOn or before 12/31/

.

.

Certain thermoplastic nylon 3-gang switch wallplates

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.01Thermoplastic nylon 3-gang switch wallplates, each measuring approximately 17.14 cm by 12.4 cm (provided for in subheading .90.00)FreeNo changeNo changeOn or before 12/31/

.

.

Manual plastic disposable cutlery dispensers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.02Dispensers designed to contain and release pieces of disposable cutlery of plastics, manually operated, each dispenser with press lever single-dispensing operation and designed to hold banded cartridges of same-branded (only) disposable cutlery, such dispensers designed to be wall mounted (provided for in subheading .90.00)FreeNo changeNo changeOn or before 12/31/

.

.

Ear bulb syringes of clear silicone

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.03Ear bulb syringes, each with tip and bulb of clear silicone and with polystyrene ring connector (provided for in subheading .90.21)FreeNo changeNo changeOn or before 12/31/

.

.

PVC inflatable pillows

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.04Inflatable travel pillows of flexible polyvinyl chloride, the exterior of which may be flocked, each with a valve for inflation, such pillows measuring between 60 cm and 70 cm in length and 15 cm to 25 cm in width and weighing between 150 g and 190 g, the foregoing presented with an attached nylon flat cord measuring between 75 cm to 80 cm in length and 1 cm to 1.5 cm in width, and which may each have a cover of polyester (provided for in subheading .90.75)FreeNo changeNo changeOn or before 12/31/

.

.

Self-inflatable queen air mattresses

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.05Pneumatic air mattresses of polyvinyl chloride, each with a flocked surface and built-in 120 V electric pump, measuring approximately 205.7 cm by 157.5 cm by 54.6 cm, weighing 11.3 kg and valued $34 or more but not over $40 (provided for in subheading .90.75)FreeNo changeNo changeOn or before 12/31/

.

.

Plastic clip fasteners

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.06Fasteners of nylon or of polypropylene, with a filament length of 2.5 mm or more but not over 127 mm, presented on clips each holding the quantity of 25, 50, 100 or 120 pieces, suitable for use in a mechanical attaching device (provided for in subheading .90.85)3.6%No changeNo changeOn or before 12/31/

.

.

Self-venting spouts for diesel exhaust fluid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.07Self-venting spouts or nozzles, threaded for connection to plastic containers on one end and fitted for connection to diesel exhaust fluid (DEF) tanks of diesel motor vehicles on the other, the foregoing presented without the containers (provided for in subheading .90.99)FreeNo changeNo changeOn or before 12/31/

.

.

Plastic pet carriers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.08Carrying cases of hard plastics, each with handle and door of plastics and with no door of metal, the foregoing designed for use for reptiles or amphibians and not for the housing or transport of mammals, measuring not over 381 mm on any side (provided for in subheading .90.99)FreeNo changeNo changeOn or before 12/31/

.

.

Plastic mixing tips

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.09Plastic mixing tips, each consisting of a mixer housing, mixing elements and a retaining ring, each designed for use as a disposable mixing tip for two-part chemistries in the dental industry (provided for in subheading .90.99)FreeNo changeNo changeOn or before 12/31/

.

.

Cable ties of plastics

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.10Cable ties of nylon, measuring 20 cm or more but not more than 61 cm in length, sold in packs each containing not over 100 pieces and valued not over $1 per pack (provided for in subheading .90.99)3.8%No changeNo changeOn or before 12/31/

.

.

Flexible camera mountings

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.11Camera mounts of plastics, each with an elongated, segmented plastic neck composed of 6 to 8 ball joints, incorporating a base that clips into other types of mounts, engineered to mount cameras of subheading .80.40 (provided for in subheading .90.99)FreeNo changeNo changeOn or before 12/31/

.

.

Three-piece camera mount sets

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.12Sets each containing three camera mounts of plastics, such mounts designed for cameras of subheading .80.40; with each set containing one mount incorporating an adjustable head-strap designed to encircle the forehead, one mount buoyant in water incorporating a handle designed to allow a user to grip with the hand and one mount in the form of a clip (provided for in subheading .90.99)FreeNo changeNo changeOn or before 12/31/

.

.

Magnetic swivel clips for cameras

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.13Camera mounts of plastics, designed to hold cameras of subheading .80.40, each mount incorporating a clip and magnetic base, capable of rotating the camera 360 degrees on a plane (provided for in subheading .90.99) FreeNo changeNo changeOn or before 12/31/

.

.

Helmet camera mounts

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.14Camera mounts of plastics, each designed to attach camera of subheading .80.40 securely onto the front or side of a helmet (provided for in subheading .90.99) FreeNo changeNo changeOn or before 12/31/

.

.

Short extension poles for use with cameras

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.15Extension poles of plastics, designed for use with cameras of subheading .80.40; such poles not buoyant in water, each having an adjustable length greater than 11 cm and less than 23 cm and incorporating a collapsible tripod handle (provided for in subheading .90.99) FreeNo changeNo changeOn or before 12/31/

.

.

Long extension poles for cameras

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.16Extension poles of plastics, designed for use with cameras of subheading .80.40; such poles not buoyant in water and without folding extension arms, each pole having an adjustable length between 23 cm and 56 cm and incorporating a collapsible tripod handle (provided for in subheading .90.99)FreeNo changeNo changeOn or before 12/31/

.

.

Swivel mounts for cameras

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.17Camera mounts of plastics, designed to hold cameras of subheading .80.40, each mount containing a ball joint and capable of swiveling the camera 360 degrees without detaching the mount (provided for in subheading .90.99) FreeNo changeNo changeOn or before 12/31/

.

.

Tripod camera mounts

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.18Camera mounts of plastics, each designed to attach a camera of subheading .80.40 securely onto a tripod (provided for in subheading .90.99) FreeNo changeNo changeOn or before 12/31/

.

.

Bulk hydraulic hoses

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.19Bulk hoses of vulcanized rubber, reinforced with metal, without fittings, designed for hydraulic use (provided for in subheading .21.00)1.6%No changeNo changeOn or before 12/31/

.

.

Brake hydraulic hoses

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.20Brake hoses, with fittings, for the vehicles of subheading .20 or headings , , , or , such hoses reinforced or otherwise combined only with textile materials (provided for in subheading .32.00)FreeNo changeNo changeOn or before 12/31/

.

.

Bulk fabric/metal-reinforced rubber hoses

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.21Hoses of vulcanized rubber (other than hard rubber), reinforced with both textile materials and metal, without fittings, presented in bulk and designed for hydraulic use (provided for in subheading .41.00)FreeNo changeNo changeOn or before 12/31/

.

.

Disposable gloves

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.22Seamless disposable gloves of vulcanized rubber other than hard rubber, designed for household use, such gloves other than surgical or medical gloves (provided for in subheading .19.10)1.5%No changeNo changeOn or before 12/31/

.

.

Reusable gloves

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.23Household reusable seamless gloves, of vulcanized rubber other than hard rubber (provided for in subheading .19.10)1.2%No changeNo changeOn or before 12/31/

.

.

Dog and cat apparel

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.24Articles of pet apparel, excluding life jackets for pets and pet apparel with attached or built-in collars or harnesses; such articles put up for retail sale (provided for in subheading .00.60)1%No changeNo changeOn or before 12/31/

.

.

Polycarbonate vanity cases

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.25Hard-sided polycarbonate vanity cases with zipper closure, such cases measuring 13 cm (including hinge) in width, 18.2 cm (including top ring) in height, at least 7 cm but not over 7.6 cm deep, each case weighing 167.26 grams or more but not over 184.27 grams (provided for in subheading .12.21)FreeNo changeNo changeOn or before 12/31/

.

.

Aluminum vanity cases

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.26Hard-sided vanity cases of aluminum, such cases with latch closure and measuring 13.8 cm in width (including hinge and latch), 18.2 cm in height (including top ring) and at least 7.5 cm but not over 7.6 cm in depth; the foregoing weighing at least 240.97 grams but not over 297.67 grams each (provided for in subheading .19.00)FreeNo changeNo changeOn or before 12/31/

.

.

Suitcases with outer surface of aluminum with built-in zipper locks

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.27Suitcases with outer surface of aluminum, with 4 wheels, at least 1 handle, with built-in zipper locks of a type compliant with standards of the Transportation Security Administration keyed for opening with a universal master tool made and patented in the United States, the first side of the locks measuring 3.73 cm or more but not over 17.78 cm, the second side of the locks measuring 1.77 cm or more but not over 7.72 cm and the third side of the locks measuring 1.06 cm or more but not over 3.97 cm (provided for in subheading .19.00)FreeNo changeNo changeOn or before 12/31/

.

.

Drawstring backpacks with zippered pocket

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.28Drawstring backpacks of 210D polyester and polyurethane blend man-made fabric, such backpacks measuring 33 cm in width and having a 3 mm polypropylene cord cinch closure with such cord knotted at the base of the bag via polypropylene webbing loops that measure 1.9 cm in width and are sewn into the side seam; the foregoing backpacks with a front diagonal pocket that measures 23 cm in width and has a closure that incorporates a zipper of nylon teeth and polyester tape that is 3.175 cm in width (provided for in subheading .92.31)FreeNo changeNo changeOn or before 12/31/

.

.

Laminated recycled reusable shopping tote bags

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.29Shopping tote bags made from laminated 100 percent recycled PET fabric made from recycled plastic bottles, each bag having a width of 38.1 cm and shoulder straps with a length of 59.69 cm (provided for in subheading .92.31), the foregoing other than goods described in heading .12.39 or .12..7%No changeNo changeOn or before 12/31/

.

.

Tote bags of paper yarn

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.30Tote bags of paper yarn, with or without closure, the foregoing with shoulder straps and with at least one side measuring more than 30.48 cm in length, designed for carrying personal effects (provided for in subheading .92.33)FreeNo changeNo changeOn or before 12/31/

.

.

Reusable shopping style tote bags

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.31Reusable shopping-style tote bags of plastic, each with handles, load capacity not over 13.61 kg and measuring at least 43.18 cm but not over 63.5 cm in width, at least 38.1 cm but not over 50.8 cm in height and 19.94 cm but not over 23.5 cm in depth (provided for in subheading .92.45), the foregoing other than of woven man-made fiber fabric visibly coated on the outer surface with plastics6.9%No changeNo changeOn or before 12/31/

.

.

Waterproof tote bags

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.32Waterproof tote bags of woven man-made fiber fabric visibly coated on the outer surface with plastics, each bag with welded seams, two or more adjustable handles, a reinforced bottom, and with a toothless plastic fully watertight zipper on both the primary compartment and the side pocket (provided for in subheading .92.45)FreeNo changeNo changeOn or before 12/31/

.

.

Waterproof duffle bags

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.33Waterproof duffle bags of woven man-made fiber fabric visibly coated on the outer surface with plastics, each with welded seams, a toothless plastic fully watertight zipper, a reinforced bottom and a separate watertight zippered compartment at the bottom (provided for in subheading .92.45)FreeNo changeNo changeOn or before 12/31/

.

.

Waterproof zippered bags, without handles, of plastic sheeting

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.34Waterproof bags of clear thermoplastic polyurethane (TPU) film and woven man-made fiber fabric visibly coated on the outer surface with plastics, each with welded seams and incorporating a toothless plastic fully watertight zipper closure; such bags measuring not over 26.2 cm wide, 27.0 cm high and 8.2 cm deep (provided for in subheading .92.45), the foregoing without handlesFreeNo changeNo changeOn or before 12/31/

.

.

Waterproof backpacks

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.35Waterproof backpacks of woven man-made fiber fabric visibly coated on the outer surface with plastics, each with welded seams, a toothless plastic fully watertight zipper and a reinforced bottom, the foregoing not presented with a detachable front pouch having its own shoulder strap (provided for in subheading .92.45)FreeNo changeNo changeOn or before 12/31/

.

.

Waterproof waist packs

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.36Waterproof waist packs of woven man-made fiber fabric visibly coated on the outer surface with plastics, each with welded seams and toothless plastic fully watertight zipper and adjustable waist strap (provided for in subheading .92.45)FreeNo changeNo changeOn or before 12/31/

.

.

Guitar cases

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.37Guitar cases, each having a guitar-shaped (not rectangular) exterior, a polyester plush interior lining and a single carrying handle, such handle with a covering of a kind known as Tolex; the foregoing cases made from plywood covered with sheeting of plastics and incorporating 4 or 5 metal locking clasps and valued over $40 but not over $60 each (provided for in subheading .92.50)FreeNo changeNo changeOn or before 12/31/

.

.

Jewelry boxes

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.38Jewelry boxes constructed of medium density fiberboard (MDF) covered with sheeting of plastics on the outer surface, each box with an embossed design covering more than 50 percent of the exterior and incorporating one exterior window through which the jewelry can be viewed, the foregoing with compartmentalized interior sections lined with velvet (provided for in subheading .92.97)FreeNo changeNo changeOn or before 12/31/

.

.

Silicone rubber camera cases with straps

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.39Camera cases of silicone rubber, designed to hold cameras of subheading .80.40, each case containing openings for the operation of the camera and an adjustable nylon strap and measuring not more than 52 mm in height, 76 mm in width and 29 mm in depth (provided for in subheading .99.90)FreeNo changeNo changeOn or before 12/31/

.

.

Leather gloves with flip mitts for hunting

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.40Full-fingered gloves, each with a palm side of leather and a back side comprising a camouflage-printed knitted fabric wholly of polyester and laminated to expanded polytetrafluoroethylene (EPTFE), such gloves with insulation comprising 40 percent by weight of synthetic microfiber and 60 percent by weight of duck down; each having a mitt sewn to the back of the glove as a flap, with leather tips for each finger and thumb designed to improve grip, such mitt designed to cover the fingers for additional warmth; the foregoing gloves designed for use in the sport of hunting (provided for in subheading .21.80)FreeNo changeNo changeOn or before 12/31/

.

.

Men's leather gloves valued at $18 or more per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.41Men's full-fingered gloves with a palm side of leather and a backside of woven fabric comprising 89 percent or more but not over 95 percent by weight of man-made fibers and 5 percent or more but not over 11 percent by weight of elastomeric fibers, such fabric fully lined with a waterproof membrane; such gloves stuffed with synthetic microfiber for thermal insulation, with elasticized wrist and valued at $18 or more/pr; the foregoing other than gloves specially designed for use in sports (provided for in subheading .29.30)FreeNo changeNo changeOn or before 12/31/

.

.

Belts of calf skin

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.42Belts of calf skin (provided for in subheading .10.00)FreeNo changeNo changeOn or before 12/31/

.

.

Bamboo engineered flooring: 12.5'12.9 mm thick

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.43Plywood flooring with a face ply of bamboo (Phyllostachys pubescens), such face ply measuring less than 4 mm in thickness; each flooring panel measuring at least 12.5 mm but not over 12.9 mm in thickness and at least 125.0 mm but not over 230.6 mm in width (provided for in subheading .10.05)FreeNo changeNo changeOn or before 12/31/

.

.

Bamboo engineered flooring: 14.1'14.5 mm thick

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.44Plywood flooring with a face ply of bamboo (Phyllostachys pubescens), such face ply measuring less than 4 mm in thickness; each flooring panel measuring at least 14.1 mm but not over 14.5 mm in thickness and at least 125.0 mm but not over 230.6 mm in width (provided for in subheading .10.05)FreeNo changeNo changeOn or before 12/31/

.

.

Bamboo engineered flooring: 15.7'16.1 mm thick

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.45Plywood flooring with a face ply of bamboo (Phyllostachys pubescens), such face ply measuring less than 4 mm; each flooring panel measuring at least 15.7 mm but not over 16.1 mm in thickness and at least 125.0 mm but not over 230.6 mm in width (provided for in subheading .10.05)FreeNo changeNo changeOn or before 12/31/

.

.

Strand bamboo flooring: 12.5'12.9 mm thick

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.46Strand bamboo (Phyllostachys pubescens) flooring, tongued and grooved, continuously shaped along any of its ends, surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply, such flooring measuring at least 12.5 mm but not over 12.9 mm in thickness and at least 126.8 mm but not over 127.2 mm in width (provided for in subheading .91.90)FreeNo changeNo changeOn or before 12/31/

.

.

Strand bamboo flooring: 14.1'14.5 mm thick

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.47Strand bamboo (Phyllostachys pubescens) flooring, tongued and grooved, continuously shaped along any of its ends, surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply, such flooring measuring at least 14.1 mm but not over 14.5 mm in thickness and at least 126.8 mm but not over 127.2 mm in width (provided for in subheading .91.90)FreeNo changeNo changeOn or before 12/31/

.

.

Strand bamboo flooring: 10.9'11.3 mm thick

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.48Strand bamboo (Phyllostachys pubescens) flooring, tongued and grooved, continuously shaped along any of its ends, surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply, such flooring measuring at least 10.9 mm but not over 11.3 mm in thickness and at least 126.8 mm but not over 127.2 mm in width (provided for in subheading .91.90)FreeNo changeNo changeOn or before 12/31/

.

.

Chopsticks made of bamboo

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.49Bamboo chopsticks (provided for in subheading .12.00)0.7%No changeNo changeOn or before 12/31/

.

.

Drying racks of wood

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.50Drying racks of wood designed to mount on the wall and fold up accordion style, the foregoing used for drying delicate clothing (provided for in subheading .90.80)FreeNo changeNo changeOn or before 12/31/

.

.

Bamboo skewers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.51Skewers or sticks made of bamboo, the foregoing not over 31 cm in length (provided for in subheading .91.60)FreeNo changeNo changeOn or before 12/31/

.

.

Wood blinds with louvered slats

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.52Wood blinds with louvered boards (provided for in subheading .99.40)FreeNo changeNo changeOn or before 12/31/

.

.

100 percent cotton woven crimped unbleached fabric

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.53Woven fabrics wholly of cotton, unbleached, crimped, with yarn number between 43 and 68, presented folded into 3 layers, measuring less than 84 cm wide before folding and less than 28 cm wide after folding; weighing less than 25 g/m2 before folding and less than 75 g/m2 after folding (measuring 3 layers at once); piece length less than 76 cm; put up layered on rolls of up to 200 pieces per roll, with edges not attached in any way, such fabric easily unfolded (provided for in subheading .11.40)FreeNo changeNo changeOn or before 12/31/

.

.

Woven fabrics of cotton, containing 85 percent or more by weight of cotton, not more than 200 grams per square meter

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.54Woven fabrics of cotton, containing 85 percent or more by weight of cotton, weighing not more than 200 g/m2, unbleached, satin weave or twill weave, 256 cm or greater in width; such fabrics having a thread count exceeding 200 or an average yarn number exceeding 68 (provided for in subheading .19.20)FreeNo changeNo changeOn or before 12/31/

.

.

100 percent cotton woven bleached fabric pieces, open weave

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.56Fabrics wholly of cotton, bleached, open weave, average yarn number between 43 and 68 metric, weighing less than 60 g/m2; presented folded in layers ranging in number from 2 to 16 layers, in pieces on rolls or stacked in a box, or on bolts, or continuous length on large rolls; measuring 89 cm to 92 cm in width before folding, folded widths between 22 cm and 42 cm in width, lengths vary depending upon packaging but ranging from 22 cm to 950 m (provided for in subheading .21.40)FreeNo changeNo changeOn or before 12/31/

.

.

Incontinence underpad fabrics of cotton

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.57Woven fabrics wholly of cotton, bleached, twill weave, of single ply yarns, weighing between 132 and 140 g/m2, measuring 182 to 194 cm in width, with 286 and 304 decitex in the warp and between 358 and 380 decitex in the filling, with 25 to 27 yarns per cm in the warp and 16 to 18 yarns per cm in the filling (provided for in subheading .29.20)FreeNo changeNo changeOn or before 12/31/

.

.

Woven fabrics of cotton with an average yarn number between 55 and 60

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.58Woven fabrics of cotton, containing over 50 percent but less than 85 percent by weight of cotton, mixed mainly with man-made fibers, weighing not more than 200 g/m2, unbleached, plain weave, in widths of 305 cm or greater; such fabrics having an average yarn number exceeding 55 but not exceeding 60 (provided for in subheading .11.60)FreeNo changeNo changeOn or before 12/31/

.

.

Woven fabric of cotton of yarn number 69 or higher

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.59Woven fabrics of cotton, containing over 50 percent but less than 85 percent by weight of cotton, mixed mainly with man-made fibers, weighing not more than 200 g/m2, unbleached, plain weave, of yarn number 69 or higher number, in widths of 226 cm or greater (provided for in subheading .11.80)FreeNo changeNo changeOn or before 12/31/

.

.

Woven fabrics of cotton with an average yarn number exceeding 68

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.60Woven fabric of cotton, containing over 50 percent but less than 85 percent by weight of cotton, mixed solely with man-made fibers, weighing not more than 200 g/m2, unbleached, satin weave or twill weave, other than 3-thread or 4-thread twill or cross twill, in widths of 226 cm or greater; such fabrics having an average yarn number exceeding 68 (provided for in subheading .19.20)FreeNo changeNo changeOn or before 12/31/

.

.

Incontinence underpad fabrics, cotton, plain weave, of yarn number 42 or lower

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.61Woven fabrics of cotton, of yarn number 42 or lower, containing by weight 77 percent to 83 percent of cotton and 17 percent to 23 percent of polyester, bleached, plain weave, weighing 165 to 175 g/m2, measuring 182 to 194 cm in width, constructed with single ply yarns with 239 to 253 decitex in the warp and with two ply yarns of 573 to 609 decitex in the filling, 19 to 21 yarns per cm in the warp and 9 to 11 single yarns per cm in the filling (provided for in subheading .21.40)FreeNo changeNo changeOn or before 12/31/

.

.

Incontinence underpad fabrics, cotton, plain weave, of yarn number between 43 and 68

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.62Woven fabrics of cotton, of yarn numbers 43 to 68, such fabrics containing by weight 51 percent to 55 percent of cotton and 45 percent to 49 percent of polyester, bleached, plain weave of single ply yarns, weighing 99 to 105 g/m2, measuring 182 to 194 cm in width, with 184 to 196 decitex in the warp and filling, 29 to 31 yarns per cm in the warp and 19 to 21 yarns per cm in the filling (provided for in subheading .21.60) FreeNo changeNo changeOn or before 12/31/

.

.

Incontinence underpad fabrics, bleached

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.63Woven fabrics of cotton, 3-thread or 4-thread twill, containing by weight 51 percent to 55 percent of cotton and 45 percent to 49 percent of polyester, bleached, of single ply yarns, weighing 132 to 140 g/m2, measuring 182 to 194 cm in width, with 162 to 172 decitex in the warp and 358 to 380 decitex in the filling, 29 to 31 yarns per cm in the warp and 21 to 23 yarns per cm in the filling (provided for in subheading .29.10)FreeNo changeNo changeOn or before 12/31/

.

.

Incontinence underpad fabrics, printed

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.64Woven fabrics of cotton, 3-thread or 4-thread twill, containing by weight 51 percent to 55 percent of cotton and 45 percent to 49 percent of polyester, printed, made from single ply yarns, weighing 132 to 140 g/m2, measuring 182 to 194 cm in width, with 162 to 172 decitex in the warp and 358 to 380 decitex in the filling, 29 to 31 yarns per cm the warp and 21 to 23 yarns per cm in the filling (provided for in subheading .59.10)FreeNo changeNo changeOn or before 12/31/

.

.

Untwisted filament polyvinyl alcohol yarn, measuring 1,100 to 1,330 decitex

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.65Synthetic (polyvinyl alcohol) filament yarn, untwisted, measuring from 1,100 to 1,330 decitex and consisting of 200 filaments (provided for in subheading .49.91)FreeNo changeNo changeOn or before 12/31/

.

.

Untwisted filament polyvinyl alcohol yarn

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.66Synthetic (polyvinyl alcohol) filament yarn, untwisted, measuring 1,330 to 2,070 decitex and consisting of between 600 and filaments (provided for in subheading .49.91)0.5%No changeNo changeOn or before 12/31/

.

.

Polypropylene (PP) monofilament

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.67Synthetic monofilament of polypropylene, of 67 decitex or more and of which no cross-sectional dimension exceeds 1 mm (provided for in subheading .12.90) FreeNo changeNo changeOn or before 12/31/

.

.

Acrylic fiber tow with an average decitex of 0.9

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.68Acrylic filament tow containing at least 85 percent but not more than 94 percent by weight of acrylonitrile units and 1 percent or more but not over 4 percent of water, raw white (undyed), crimped, with an average decitex of 0.9 (plus or minus 10 percent) and an aggregate filament measure in the tow bundle between 660,000 and 1,300,000 decitex, with a length greater than 2 m (provided for in subheading .30.00) FreeNo changeNo changeOn or before 12/31/

.

.

Black polyester bi-component fibers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.71Synthetic staple fibers, not carded, combed or otherwise processed for spinning, the foregoing comprising black polyester bi-component fibers measuring between 4.4 and 6.7 decitex and with fiber length between 50 and 51 mm; having an outer copolymer sheath that melts at a lower temperature than the core; the foregoing of a kind used for bonding fibers together (provided for in subheading .20.00) FreeNo changeNo changeOn or before 12/31/

.

.

Acrylic staple fibers with an average decitex of 2.2, fiber length of 100 mm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.72Acrylic staple fibers containing at least 85 percent by weight of acrylonitrile units and 2 percent or more but not over 3 percent of water, raw white (undyed), crimped, with an average decitex of 2.2 (plus or minus 10 percent) and fiber length of 100 mm (plus or minus 10 percent) (provided for in subheading .30.00) FreeNo changeNo changeOn or before 12/31/

.

.

Modacrylic staple fibers not processed for spinning

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.73Modacrylic staple fibers containing 35 percent or more but not over 85 percent by weight of acrylonitrile units and 1 percent or more but not over 3 percent of water, pigmented, crimped, with an average decitex between 1.9 and 3.3 (plus or minus 10 percent) and a fiber length between 45 and 51 mm (plus or minus 10 percent) (provided for in subheading .30.00) FreeNo changeNo changeOn or before 12/31/

.

.

Short polypropylene fibers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.74Polypropylene fibers, 6.66 decitex, with a fiber length of 0.5 mm (provided for in subheading .40.00) FreeNo changeNo changeOn or before 12/31/

.

.

Polyoxadiazole fibers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.75Synthetic staple fibers of polyoxadiazole, not carded, combed or otherwise processed for spinning, measuring between 1 and 2 decitex and with fiber length between 38 mm and 51 mm (provided for in subheading .90.90) FreeNo changeNo changeOn or before 12/31/

.

.

Artificial staple fibers of viscose rayon, 38'42 mm in length

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.76Artificial staple fibers of viscose rayon, not carded, combed or otherwise processed for spinning, each measuring 1.5 or more but not over 1.8 decitex and having a fiber length measuring 38 mm or more but not over 42 mm (provided for in subheading .10.00) FreeNo changeNo changeOn or before 12/31/

.

.

Artificial fibers of viscose rayon for the manufacture of feminine hygiene products

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.77Artificial staple fibers of viscose rayon, not carded, combed or otherwise processed for spinning, each measuring 2.9 or more but not over 3.7 decitex and having a fiber length measuring 28 mm, the foregoing suitable for use in producing goods of heading (provided for in subheading .10.00) FreeNo changeNo changeOn or before 12/31/

.

.

Flame retardant rayon fibers, measuring 4.78 decitex

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.78Artificial staple fibers of viscose rayon, not carded, combed or otherwise processed for spinning, containing 28 percent or more but not over 33 percent by weight of silica, measuring 4.78 decitex in lengths of 60 mm (provided for in subheading .10.00) FreeNo changeNo changeOn or before 12/31/

.

.

Flame retardant rayon fibers, measuring 4.55 decitex

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.79Artificial staple fibers of viscose rayon, not carded, combed or otherwise processed for spinning, containing 28 percent or more but not over 33 percent by weight of silica measuring 4.55 decitex in lengths of 60 mm (provided for in subheading .10.00) FreeNo changeNo changeOn or before 12/31/

.

.

Flame retardant rayon fibers, measuring 4.4 decitex

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.80Artificial staple fibers of viscose rayon, not carded, combed or otherwise processed for spinning, each containing 28 percent or more but not over 33 percent by weight of silica, measuring 4.4 decitex and 60 mm in length (provided for in subheading .10.00) FreeNo changeNo changeOn or before 12/31/

.

.

Other flame retardant rayon fibers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.81Artificial staple fibers of viscose rayon, not carded, combed or otherwise processed for spinning and containing 28 percent or more but not over 33 percent by weight of silica (provided for in subheading .10.00); the foregoing other than fibers measuring 2.2 decitex in lengths of 38 mm, measuring 4.7 decitex in lengths of 51 mm or measuring 3.3, 4.4, 4.55, 4.7, 4.78 or 5.0 decitex in lengths of 60 mm FreeNo changeNo changeOn or before 12/31/

.

.

Cellulosic man-made viscose rayon staple fibers, measuring 1.3'1.5 decitex

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.82Artificial staple fibers of viscose rayon, not carded, combed or otherwise processed for spinning, measuring 1.3 decitex but not over 1.5 decitex and having a fiber length each measuring 20 mm or more but not over 150 mm (provided for in subheading .10.00), the foregoing other than fibers with a length of 38 mm or more but not over 42 mm FreeNo changeNo changeOn or before 12/31/

.

.

Viscose rayon staple fibers, measuring 1.5'1.67 decitex, with a fiber length of 38'42 mm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.83Artificial staple fibers of viscose rayon, not carded, combed or otherwise processed for spinning, each measuring greater than 1.5 decitex but not over 1.67 decitex and having a fiber length measuring 20 mm or more but not over 150 mm (provided for in subheading .10.00), the foregoing other than fibers with a length of 38 mm or more but not over 42 mm FreeNo changeNo changeOn or before 12/31/

.

.

Cellulosic man-made viscose rayon staple fibers, measuring 1.67'2 decitex

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.84Artificial staple fibers of viscose rayon, not carded, combed or otherwise processed for spinning, measuring greater than 1.67 decitex but not over 2 decitex and having a fiber length each measuring 20 mm or more but not over 150 mm (provided for in subheading .10.00), the foregoing other than fibers with a length of 38 mm or more but not over 42 mm 0.6%No changeNo changeOn or before 12/31/

.

.

Viscose rayon staple fibers, measuring 1'2 decitex, with a fiber length of 4'8 mm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.85Artificial staple fibers of viscose rayon, not carded, combed or otherwise processed for spinning, measuring 1 decitex or more but not over 2 decitex and having a fiber length each measuring 4 mm or more but less than 8 mm (provided for in subheading .10.00) FreeNo changeNo changeOn or before 12/31/

.

.

Viscose staple fibers used in textile, medical, or hygiene applications

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.86Staple fibers of viscose rayon, not carded, combed or otherwise processed for spinning, measuring over 2 decitex but not over 3.3 decitex and having a fiber length each measuring over 55 mm or more but not over 60 mm (provided for in subheading .10.00) FreeNo changeNo changeOn or before 12/31/

.

.

Viscose rayon staple fibers, measuring 1.51'2 decitex, with a fiber length of 8'16 mm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.87Artificial staple fibers of viscose rayon, not carded, combed or otherwise processed for spinning, measuring 1.51 decitex or more but not over 2.0 decitex and having a fiber length each measuring 8 mm or more but not over 16 mm (provided for in subheading .10.00) FreeNo changeNo changeOn or before 12/31/

.

.

Viscose rayon staple fibers, measuring 1'1.5 decitex, with a fiber length of 8'16 mm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.88Artificial staple fibers of viscose rayon, not carded, combed or otherwise processed for spinning, measuring 1 decitex or more but not over 1.5 decitex and having a fiber length each measuring 8 mm or more but not over 16 mm (provided for in subheading .10.00) FreeNo changeNo changeOn or before 12/31/

.

.

Flame retardant viscose rayon staple fibers, with a decitex of 4.7 mm and a fiber length of 51'60 mm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.89Artificial staple fibers of viscose rayon, not carded, combed or otherwise processed for spinning, each measuring 4.7 decitex (plus or minus 10 percent) and having a fiber length measuring 51 mm but not over 60 mm (provided for in subheading .10.00), the foregoing other than fibers containing 28 percent or more but not over 33 percent by weight of silica, measuring 4.7 decitex and 60 mm in length FreeNo changeNo changeOn or before 12/31/

.

.

Viscose rayon staple fibers for nonwoven production

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.90Staple fibers of viscose rayon, with decitex ranging from either 0.5 decitex to less than 0.9 decitex or greater than 2 decitex to 3.5 decitex, the foregoing with a fiber length of 25 mm to 55 mm (provided for in subheading .10.00) FreeNo changeNo changeOn or before 12/31/

.

.

Black viscose rayon staple fibers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.91Artificial staple fibers, not carded, combed or otherwise processed for spinning, each black in color, having a decitex of 1.7 but not over 2, with cut length measuring 30 mm but not over 80 mm (provided for in subheading .10.00), the foregoing other than fibers of 1.7 decitex or more but not over 1.8 decitex, with fiber length measuring 38 mm or more but not over 42 mm FreeNo changeNo changeOn or before 12/31/

.

.

Acrylic or modacrylic staple fibers with a decitex of 3'5.6

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.92Acrylic or modacrylic staple fibers, carded, combed or otherwise processed for spinning, containing by weight 92 percent or more of polyacrylonitrile, not more than 0.1 percent of zinc and 2 percent or more but not over 8 percent of water, undyed, with an average decitex of 3 to 5.6 (provided for in subheading .30.00) FreeNo changeNo changeOn or before 12/31/

.

.

Made up hand-cast string-drawn fishing nets

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.93Made up hand-cast string-drawn fishing nets, of nylon monofilament, each with attached string or rope, incorporating a neoprene cuff and attachment for user's waistband belt (provided for in subheading .11.00) FreeNo changeNo changeOn or before 12/31/

.

.

Knitted carpets containing 75 percent or more of cotton, with a rubber backing

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.94Carpets and other textile floor coverings, knitted, made up, containing 75 percent or more by weight of cotton fibers, each with a rubber backing (provided for in subheading .00.20) FreeNo changeNo changeOn or before 12/31/

.

.

Knitted carpets containing 75 percent or more by weight of polyester, with a rubber backing

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.95Whether or not made up knitted carpets and other textile floor coverings, made up, containing 75 percent or more by weight of polyester fibers, each with a rubber backing (provided for in subheading .00.20) FreeNo changeNo changeOn or before 12/31/

.

.

Faux leather fabrics

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.96Fabrics of faux leather, polyurethane-coated, of man-made fibers, containing by weight 50 percent or more but not over 62 percent of polyurethane, 36 percent or more but not over 45 percent of man-made fibers and 2 percent or more but not over 5 percent of elastomeric fibers, for use in women's apparel, weighing 330 to 360 g/m2, measuring 132 cm to 137 cm in width (provided for in subheading .20.25) FreeNo changeNo changeOn or before 12/31/

.

.

Grass catcher bags

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.97Grass catcher bags of man-made fiber fabric, used primarily with push lawn mowers, riding lawn mowers and chipper/shredder/vacuums (provided for in subheading .90.00) FreeNo changeNo changeOn or before 12/31/

.

.

Oxygenation membrane capillary material

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.98Knitted or crocheted fabrics of polymethylpentene (PMP) oxygenation membrane capillary fibers, such fabrics consisting of PMP tubes arranged and secured in a knitted fabric of PMP (provided for in subheading .30.60) FreeNo changeNo changeOn or before 12/31/

.

.

Textile knitted fabrics composed of micromodal and elastane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.26.99Knitted fabrics containing by weight 66 to 79 percent micromodal and 21 to 34 percent elastane, measuring over 30 cm in width, weighing 155 to 220 g/m2, knitted with fine machine gauges of 44 to 50 (provided for in subheading .10.00) FreeNo changeNo changeOn or before 12/31/

.

.

Textile technical knitted fabrics combining technical cotton and elastane

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.01 Technical knitted fabrics containing by weight 71 percent technical cotton and 29 percent elastane, measuring 170 to 180 cm in width, weighing 160 to 200 g/m2, valued at $14.50 or more per linear meter (provided for in subheading .10.00) FreeNo changeNo changeOn or before 12/31/

.

.

Textile knit fabrics of modal, cashmere, and spandex

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.02 Textile knitted fabric containing by weight 78 percent modal, 14 percent cashmere and 8 percent spandex, weighing 75 to 85 grams per square meter, with cuttable width of 130 to 140 cm, valued at not less than $17 per linear meter as presented (provided for in subheading .43.00) FreeNo changeNo changeOn or before 12/31/

.

.

Women's and girls' dresses, knitted or crocheted, of synthetic fibers infused with minerals

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.05Women's and girls' dresses, knitted or crocheted, of synthetic fibers infused with minerals including silicon dioxide, titanium dioxide or aluminum oxide ground to a size not greater than 1 micron, such dresses specially designed for the sport of competitive cheerleading (provided for in subheading .43.20) FreeNo changeNo changeOn or before 12/31/

.

.

Women's and girls' skirts and divided skirts of synthetic fibers infused with minerals

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.06Women's and girls' skirts and divided skirts of synthetic fibers infused with minerals including silicon dioxide, titanium dioxide or aluminum oxide ground to a size not greater than 1 micron, such skirts or divided skirts specially designed for the sport of competitive cheerleading (provided for in subheading .53.20) FreeNo changeNo changeOn or before 12/31/

.

.

Women's and girls' knit cardigans or pullovers containing 70 percent or more of silk

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.09Women's or girls' knitted or crocheted pullovers and cardigans, containing 70 percent or more by weight of silk or silk waste, each with more than 9 stitches/2 cm, measured in the direction the stitches were formed, and an average of less than 10 stitches/linear cm in each direction counted on an area measuring at least 10 cm by 10 cm, such apparel articles that reach the waist (provided for in subheading .90.10) FreeNo changeNo changeOn or before 12/31/

.

.

Men's and boys' knit cardigans or pullovers of linen

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.10Men's or boys' knitted or crocheted pullovers and cardigans, of linen, each with more than 9 stitches/2 cm, measured in the direction the stitches were formed, and an average of less than 10 stitches/linear cm in each direction counted on an area measuring at least 10 cm by 10 cm, such apparel articles that reach the waist (provided for in subheading .90.90) FreeNo changeNo changeOn or before 12/31/

.

.

Babies' knit sweaters, pullovers, sweatshirts, waistcoats (vests), and cardigans, of artificial fibers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.11Babies' knitted or crocheted sweaters, pullovers, sweatshirts, waistcoats (vests) and cardigans, the foregoing of artificial fibers and other than those imported as parts of sets (provided for in subheading .90.40) FreeNo changeNo changeOn or before 12/31/

.

.

Women's and girls' tops, knitted or crocheted, of man-made fibers infused with minerals

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.15Women's and girls' tops, knitted or crocheted, of man-made fibers infused with minerals including silicon dioxide, titanium dioxide or aluminum oxide ground to a size not greater than 1 micron, such tops specially designed for the sport of competitive cheerleading (provided for in subheading .30.10) FreeNo changeNo changeOn or before 12/31/

.

.

Men's and boy's tops, knitted or crocheted, of man-made fibers infused with minerals

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.16Men's and boy's tops, knitted or crocheted, of man-made fibers infused with minerals including silicon dioxide, titanium dioxide or aluminum oxide ground to a size not greater than 1 micron, such tops specially designed for the sport of competitive cheerleading (provided for in subheading .30.10) FreeNo changeNo changeOn or before 12/31/

.

.

Men's 3 mm wetsuits

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.17Men's full-body wetsuits, each made from three-layer fabric composed of a knitted outer layer of polyester and spandex bonded to a fleece knit pile inner layer of polyester and spandex with a center core of expanded rubber for its body, and a three-layer fabric composed of knitted inner and outer layers of polyester with a center core of expanded rubber for its sleeves, shoulders and lower legs, measuring no more than 3.4 mm in thickness in the torso, such wetsuits valued $97 or more but not over $130 each (provided for in subheading .30.30) FreeNo changeNo changeOn or before 12/31/

.

.

Men's 5.5 and 6.5 mm wetsuits

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.18Men's full-body wetsuits, each made from three-layer fabric composed of a knitted outer layer of polyester and spandex bonded to a fleece knit pile inner layer of polyester and spandex with a center core of expanded rubber for its body, and a three-layer fabric composed of knitted inner and outer layers of polyester with a center core of expanded rubber for its sleeves, shoulders and lower legs, measuring 5.1 mm or more but not over 7 mm in thickness in the torso, such wetsuits valued $120 or more but not over $175 each (provided for in subheading .30.30) FreeNo changeNo changeOn or before 12/31/

.

.

Men's 3.5 mm wetsuits

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.19Men's full-body wetsuits, made from three-layer fabric composed of a knitted outer layer of polyester and spandex bonded to a fleece knitted pile inner layer of polyester and spandex with a center core of expanded rubber for its body, and a three-layer fabric composed of knitted inner and outer layers of polyester with a center core of expanded rubber for its sleeves, shoulders and lower legs, measuring 3.5 mm or more but not over 4 mm in thickness in the torso, such wetsuits each valued at $102 or more but not over $150 (provided for in subheading .30.30) FreeNo changeNo changeOn or before 12/31/

.

.

Men's 4.5 mm wetsuits

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.20Men's full-body wetsuits, each made from a three-layer fabric composed of a knitted outer layer of polyester and spandex bonded to a fleece knitted pile inner layer of polyester and spandex with a center core of expanded rubber for its body, and a three-layer fabric composed of a knitted inner of polyester and outer layers with a center core of expanded rubber for its sleeves, shoulders and lower legs, measuring 4.1 mm or more but not over 5 mm in thickness in the torso, such wetsuits valued $105 or more but not over $160 each (provided for in subheading .30.30) FreeNo changeNo changeOn or before 12/31/

.

.

Women's 3 mm wetsuits

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.21Women's full-body wetsuits, each made from three-layer fabric composed of a knitted outer layer of polyester and spandex bonded to a fleece knit pile inner layer of polyester and spandex with a center core of expanded rubber for its body, and a three-layer fabric composed of knitted inner and outer layers of polyester with a center core of expanded rubber for its sleeves, shoulders and lower legs, measuring no more than 3.4 mm in thickness in the torso, such wetsuits valued $97 or more but not over $130 each (provided for in subheading .30.30) FreeNo changeNo changeOn or before 12/31/

.

.

Women's 3.5 mm wetsuits

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.22Women's full-body wetsuits, made from three-layer fabric composed of a knitted outer layer of polyester and spandex bonded to a fleece knitted pile inner layer of polyester and spandex with a center core of expanded rubber for its body, and a three-layer fabric composed of knitted inner and outer layers of polyester with a center core of expanded rubber for its sleeves, shoulders and lower legs, measuring 3.5 mm or more but not over 4 mm in thickness in the torso, such wetsuits each valued $102 or more but not over $150 (provided for in subheading .30.30) FreeNo changeNo changeOn or before 12/31/

.

.

Women's 4.5 mm wetsuits

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.23Women's full-body wetsuits, each made from three-layer fabric composed of a knitted outer layer of polyester and spandex bonded to a fleece knitted pile inner layer of polyester and spandex with a center core of expanded rubber for its body, and a three-layer fabric composed of knitted inner and outer layers of polyester with a center core of expanded rubber for its sleeves, shoulders and lower legs, measuring 4.1 mm or more but not over 5 mm in thickness in the torso, such wetsuits valued $105 or more but not over $160 each (provided for in subheading .30.30) FreeNo changeNo changeOn or before 12/31/

.

.

Women's 5.5 and 6.5 mm wetsuits

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.24Women's full-body wetsuits, of three-layer fabric composed of a knitted outer layer of polyester and spandex bonded to a polyester and spandex fleece knitted pile inner layer with a center core of expanded rubber for its body, and a three-layer fabric composed of knitted inner and outer layers of polyester with a center core of expanded rubber for its sleeves, shoulders and lower legs with material measuring 5.1 mm or more but not over 7 mm in thickness in the torso, such wetsuits valued $120 or more but not over $175 each (provided for in subheading .30.30) FreeNo changeNo changeOn or before 12/31/

.

.

Insulated handmuffs of knit polyester

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.25Hand muffs of knitted fabrics of polyester laminated with plastics, such muffs stuffed with synthetic microfiber for thermal insulation, each with side openings having elastic closures, with one exterior pocket with zipper closure and weighing not more than 500 g (provided for in subheading .80.95) FreeNo changeNo changeOn or before 12/31/

.

.

Men's stockingfoot wader bottom subassemblies, of compressed neoprene

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.26Men's stockingfoot wader bottom subassemblies, constructed from neoprene (originally measuring 6 mm to 8 mm in thickness) compressed to 4 mm in thickness, laminated on both sides with a knitted nylon fabric, whose height exceeds 20.5 cm; each such stockingfoot formed anatomically (provided for in subheading .90.90) FreeNo changeNo changeOn or before 12/31/

.

.

Men's stockingfoot wader bottom subassemblies, of non-compressed neoprene

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.27Men's stockingfoot wader bottom subassemblies, made from non-compressed neoprene having a thickness of 4 mm, laminated on both sides with a knitted nylon fabric, height exceeding 20.5 cm; each such stockingfoot formed anatomically (provided for in subheading .90.90) FreeNo changeNo changeOn or before 12/31/

.

.

Fishing wader pocket pouch assemblies

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.28Pocket pouches, each with outer shell of woven textile fabric visibly coated with rubber or plastics and laminated to an inner layer of knitted fabric, with a zippered cargo pocket and other pockets designed to organize tippets and leaders and with dual entry zippers; the foregoing designed to be affixed to a fishing wader and not put up for individual retail sale (provided for in subheading .90.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's coats of man-made woven fibers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.35Women's quilted water-resistant coats, woven, of man-made fibers, thigh length or longer, with sleeves, with a removable hood, with a full front opening and closure (provided for in subheading .13.40) FreeNo changeNo changeOn or before 12/31/

.

.

Men's or boys' linen woven trousers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.38Men's or boys' woven trousers, of linen (provided for in subheading .49.90) FreeNo changeNo changeOn or before 12/31/

.

.

Men's or boys' linen woven shorts

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.39Men's or boys' woven shorts, of linen, such shorts which do not cover the knee or below in length (provided for in subheading .49.90) FreeNo changeNo changeOn or before 12/31/

.

.

Martial arts uniforms

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.40Women's and girls' judo, karate and other oriental martial arts uniforms of cotton, presented as ensembles each consisting of a top and a bottom, with or without an accompanying belt (provided for in subheading .22.10) FreeNo changeNo changeOn or before 12/31/

.

.

Women's dresses of woven viscose

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.41Women's dresses, woven, wholly of viscose (provided for in subheading .44.40) 15.2%No changeNo changeOn or before 12/31/

.

.

Girls' woven cotton corduroy trousers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.42Girls' woven corduroy trousers, of cotton, not imported as parts of playsuits (provided for in subheading .62.80) FreeNo changeNo changeOn or before 12/31/

.

.

Women's woven waffle shirts

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.43Women's woven shirts of cotton, with 2 or more colors in the warp and/or the filling, twill, each having brushed back and colored weft yarns, constructed from interwoven single-layer fabric with two right sides (provided for in subheading .30.30) FreeNo changeNo changeOn or before 12/31/

.

.

Babies' woven artificial fiber shirts and blouses

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.44Babies' woven blouses and shirts of artificial fibers, such garments that extend from the neck area to or below the waist, with or without sleeves, with full or partial or no front opening, without pockets and without tightening at the bottom, and except those imported as parts of sets (provided for in subheading .90.10) FreeNo changeNo changeOn or before 12/31/

.

.

Babies' artificial fiber woven jumpsuits, coveralls, dresses, skirts, skirtalls, or clothing accessories

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.45Babies' woven jumpsuits, coveralls, dresses, skirts, skirtalls or clothing accessories, the foregoing of artificial fibers and other than garments or accessories imported as parts of sets (provided for in subheading .90.30) FreeNo changeNo changeOn or before 12/31/

.

.

Women's or girls' linen woven blouses, shirts and shirt-blouses, and sleeveless tank styles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.48Women's or girls' woven blouses, shirts and shirt-blouses and sleeveless tank styles, the foregoing of linen and extending from the neck area to or below the waist, with or without sleeves, with full or partial opening or no opening, with pockets below the waist or tightening at the bottom (provided for in subheading .49.80) FreeNo changeNo changeOn or before 12/31/

.

.

Women's or girls' linen woven washsuits, sunsuits, or one-piece playsuits

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.49Women's or girls' woven washsuits, sunsuits and one-piece playsuits, of linen (provided for in subheading .49.80) FreeNo changeNo changeOn or before 12/31/

.

.

Women's or girls' linen woven coveralls or jumpsuits

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.50Women's or girls' woven coveralls or jumpsuits, of linen (provided for in subheading .49.80) FreeNo changeNo changeOn or before 12/31/

.

.

Women's shawls and similar goods, 100 percent silk

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.51Women's shawls, scarves and similar goods, wholly of silk, valued less than $7 each (provided for in subheading .10.10) FreeNo changeNo changeOn or before 12/31/

.

.

Winter cycling gloves

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.52Winter cycling gloves, each with woven outer shell of man-made fibers and a merino wool lining (provided for in subheading .00.46) FreeNo changeNo changeOn or before 12/31/

.

.

Mattress protectors with toppers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.53Mattress protectors, each with topper of knitted three-layer fabric wholly of polyester jersey and with total weight of 340 g/m2, the bottom layer of such fabric laminated for waterproofing, white in color; the skirt of which comprises knitted fabric wholly of polyester with one-way stretch, bleached white, such skirt measuring 43 cm with elastic band measuring 1 cm in width around the bottom of each protector (provided for in subheading .10.00) 4.8%No changeNo changeOn or before 12/31/

.

.

Printed mattress protectors

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.54Mattress protectors, each with a body comprising knitted three-layer fabric weighing 530 g/m2 and containing by weight 67 percent polyester and 33 percent polyethylene, the bottom layer of such fabric with laminate of thermoplastic polyurethane to provide waterproofing; the skirt of which comprises knitted fabric weighing 150 g/m2 and containing by weight 92 percent polyester and 8 percent elastomeric fiber, such fabric having two-way stretch, measuring 38.1 cm in depth and with elastomeric band at the bottom of each protector; such mattress protectors printed, with silver satin cording around four sides (provided for in subheading .10.00) 4.1%No changeNo changeOn or before 12/31/

.

.

Lock pocket tents

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.59Dome-shaped tents of woven fabric of polyester, each tent with attached polyethylene floor and fiberglass poles permanently attached to the rear bottom corners of the tent by means of polyvinyl chloride end connectors sewn into webbing straps, with the opposite ends having polyvinyl chloride ball-shaped caps that insert into mesh fabric pockets 10.7 cm to 12.1 cm long at the front bottom corners of the tent and attach to the tent at intervals via webbing straps with fitted plastic clips, the foregoing tents each valued at $19 or higher (provided for in subheading .22.90) FreeNo changeNo changeOn or before 12/31/

.

.

Dark room tents

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.60Tents of woven fabric of polyester, with light-blocking dark pigment coating, such tents with attached polyethylene floor, measuring 144.7 cm by 213.3 cm or more but not over 426.8 cm by 304.8 cm, with a center height of at least 142.2 cm but not over 201 cm, each such tent valued at $30 or higher (provided for in subheading .22.90) FreeNo changeNo changeOn or before 12/31/

.

.

Air tube chambered tents

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.61Air-filled tube structure tents of synthetic fibers, each measuring approximately 2.13 m wide by 2.31 m long by 2.34 m tall, with nylon mesh screens, clear vinyl plastic windows, magnetic flap closure and opaque sentinel luxe-taslan fabric curtains (provided for in subheading .22.90) FreeNo changeNo changeOn or before 12/31/

.

.

Bi-component microfiber tube mop refills

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.62Replacement mop heads, constructed from circular knit bi-component microfiber fabric tubes containing by weight 65 to 90 percent of polyester and 10 to 35 percent of nylon, sewn together with raw edges enclosed, valued at least $2 but no more than $4 each (provided for in subheading .10.20) FreeNo changeNo changeOn or before 12/31/

.

.

Microfiber duster refills

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.63 Duster refill pads made from knitted high pile microfiber fabric containing by weight 60 percent to 90 percent of polyester and 10 percent to 40 percent of nylon, valued less than $1.80 each (provided for in subheading .10.20) FreeNo changeNo changeOn or before 12/31/

.

.

RFID mop pads

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.64 Finished mop pads made from warp knit fabric containing by weight 60 percent to 90 percent of polyester and 10 percent to 40 percent of nylon, weighing at least 300 g/m2 but no more than 700 g/m2, such mop pads each having an RFID chip permanently stitched inside them (provided for in subheading .10.20) FreeNo changeNo changeOn or before 12/31/

.

.

Microfiber cleaning cloths

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.65 Microfiber cloths made from warp knit fabric containing by weight 60 percent to 90 percent of polyester and 10 percent to 40 percent of nylon, weighing at least 190 g/m2 but no more than 360 g/m2, such cloths having edges finished with an overcast stitch, valued at least $0.06 but not more than $0.90 each (provided for in subheading .10.20) 4%No changeNo changeOn or before 12/31/

.

.

Microfiber mop pads

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.66 Finished mop pads made from warp knit microfiber fabric containing by weight 60 percent to 90 percent of polyester and 10 percent to 40 percent of nylon, each weighing at least 300 g/m2 but no more than 700 g/m2 and valued at least $0.40 but no more than $4.90 (provided for in subheading .10.20) 2%No changeNo changeOn or before 12/31/

.

.

Golf bag bodies with rain hoods and straps

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.67 Golf bag bodies made from woven fabric of man-made textile materials, each presented sewn together with pockets, with golf bag rain hood, sling, webbing clips and top and bottom collars (provided for in subheading .90.98), the foregoing presented without dividers or bottoms 0.5%No changeNo changeOn or before 12/31/

.

.

Pillow shells, constructed with gussets

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.68 Pillow shells, each with body made of fabric weighing 450 g/m2 and containing by weight 84 percent of polyester and 16 percent of rayon; when constructed with gusset, such gusset of warp knit spacer fabric weighing 380 g/m2 and containing by weight 80 percent of polyester and 20 percent of nylon, with gusset lining of fabric weighing 35 g/m2 and wholly of polyester, 30 thread count per cm2; each such shell either (1) with round corners, 5 cm mesh gusset, color satin cording on all sides, embroidery words on each long side gusset and 56 cm invisible zipper opening at one long side, such shell measuring 54 cm by 43 cm by 5 cm; or (2) measuring 46 cm by 64 cm, with 3 mm cording all around, each top and back panel with one cutout three-dimensional (3D) warp knitting spacer fabric (micro polyester lining underneath cutout) and 50 cm invisible zipper opening at one long side (provided for in subheading .90.98) FreeNo changeNo changeOn or before 12/31/

.

.

Golf bag body flats

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.70 Golf bag bodies made of woven fabric of man-made textile materials, sewn together with pockets, each presented with golf bag rain hood, sling, webbing clips and top and bottom collars (provided for in subheading .90.98), the foregoing presented either without bottoms or with bottoms not attached to such bodies 1.2%No changeNo changeOn or before 12/31/

.

.

Bathtub elbow rests

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.71 Elbow pads of textile materials, with faux neoprene shell and foam inner layer, with non-slip backing with suction cups to attach to the bath tub, containing no bisphenol-A (BPA) or phthalates, measuring approximately 40 cm in length by 10.2 cm in width by 15.9 cm in height (provided for in subheading .90.98) FreeNo changeNo changeOn or before 12/31/

.

.

Door swings

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.72 Door swings, each comprising two straps wholly of polypropylene and measuring approximately 1.52 m in length, such straps each having two cuffs wholly of velour, an acrylic bar with end caps wholly of polyurethane and two adjustable buckles wholly of polyoxymethylene (provided for in subheading .90.98) FreeNo changeNo changeOn or before 12/31/

.

.

Under bed restraints

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.73 Sets of bed restraints designed to restrain a bed's occupant, each comprising four straps wholly of polypropylene and measuring approximately 1.37 m in length, such straps each connected by one large O-ring wholly of iron and having one small O-ring; each restraint with 4 cuffs wholly of velour; such cuffs each with one small O-ring wholly of iron attached to a carabiner hook wholly of zinc alloy and with two buckles wholly of polyoxymethylene, with a hook-and-loop fastener strap wholly of polyester (provided for in subheading .90.98) FreeNo changeNo changeOn or before 12/31/

.

.

Flat golf bag body components, without bottoms

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.75 Golf bag bodies made of woven fabric of man-made textile materials, sewn together with pockets and straps, each presented with attached rainhood, top, top wrap and dividers but without bottom (provided for in subheading .90.98), the foregoing each presented without webbing clips or bottom collar FreeNo changeNo changeOn or before 12/31/

.

.

Bath kneeler

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.76 Knee pads of man-made fiber neoprene fabric, containing no bisphenol A (BPA) or phthalates, measuring approximately 43.2 cm in length by 28 cm in width by 3.3 cm in height (provided for in subheading .90.98) FreeNo changeNo changeOn or before 12/31/

.

.

Pillow shells, with oval jacquard weave

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.77 Pillow shells, each with body of fabric containing by weight 68 percent of polyester, 33 percent of polyethylene and 1 percent of elastomeric fibers and weighing 530 g/m2, oval jacquard weave made from cooling yarns; the foregoing either (1) each with chamber partition of two-way stretch knitted jersey fabric containing by weight 92 percent of polyester and 8 percent of elastomeric fibers and weighing 150 g/m2; with gusset wholly of polyester three-dimensional (3D) warp knit lined by a fabric wholly of microfiber polyester weighing 35 g/m2, 30 thread count/cm2; or (2) with two-chamber construction, with 5 cm mesh gusset lined with fabric wholly of microfiber polyester, such mesh gusset embroidered on each long side, with both top and bottom chambers having an invisible SBS #4 zipper closure measuring approximately 55.9 cm at same long side, with interlayer two-way stretch jersey fabric partitioning such two chambers for a pillow size measuring 43 cm by 61 cm by 5 cm (provided for in subheading .90.98) FreeNo changeNo changeOn or before 12/31/

.

.

Two-piece camera mount kits

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.78 Two-piece camera mount kits of textile materials, presented in sets, designed for cameras of subheading .80.40; each set containing one chest harness of textile materials and one plastic mount designed to securely attach a camera onto tubes measuring 9 to 35 mm in diameter and incorporating a base capable of rotating the camera 360 degrees (provided for in subheading .90.98) FreeNo changeNo changeOn or before 12/31/

.

.

Sleeve covers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.79 Sleeve covers of non-woven fabric of man-made fibers (provided for in subheading .90.98) FreeNo changeNo changeOn or before 12/31/

.

.

Sports footwear for men, valued over $20 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.80 Sports footwear with outer soles and uppers of rubber or plastics, valued over $20/pr, for men (provided for in subheading .19.90); the foregoing other than golf or cycling footwear for men described in other provisions of this subchapter6.9%No changeNo changeOn or before 12/31/

.

.

Sports footwear for women, valued over $20 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.81 Sports footwear with outer soles and uppers of rubber or plastics, valued over $20/pr, for persons other than men (provided for in subheading .19.90); the foregoing other than golf or cycling footwear for persons other than men and described in other provisions of this subchapter 7.6%No changeNo changeOn or before 12/31/

.

.

Men's cycling shoes valued over $18 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.82 Cycling shoes with outer soles and uppers of rubber or plastics, valued over $18/pr, for men, the foregoing having a cleat mounting system on the sole for attaching to bicycle pedals (provided for in subheading .19.90), the foregoing other than winter cycling boots 4.6%No changeNo changeOn or before 12/31/

.

.

Women's cycling shoes valued over $16 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.83 Cycling shoes with outer soles and uppers of rubber or plastics, valued over $16/pr, for women, having a cleat mounting system on the sole for attaching to bicycle pedals (provided for in subheading .19.90); the foregoing other than winter cycling boots for womenFreeNo changeNo changeOn or before 12/31/

.

.

Men's golf shoes with outers and uppers of rubber or plastics, valued over $20 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.84 Golf shoes with outer soles and uppers of rubber or plastics, for men, such shoes whether designed to be worn on-course, off-course or both, the foregoing with spikes, sprigs, cleats, stops, clips, bars or the like intended to enhance traction and grip, valued over $20/pr (provided for in subheading .19.90) FreeNo changeNo changeOn or before 12/31/

.

.

Golf shoes other than for men, with outers and uppers of rubber or plastics, valued over $20 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.85 Golf shoes with outer soles and uppers of rubber or plastics, whether designed to be worn on- or off-course, the foregoing with spikes, sprigs, cleats, stops, clips, bars or the like intended to enhance traction and grip, valued over $20/pr, for persons other than men (provided for in subheading .19.90) FreeNo changeNo changeOn or before 12/31/

.

.

Winter cycling boots for men

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.86 Winter cycling boots for men, designed to be compatible with flat or clipless pedals, the foregoing with or without removeable liner, with boa closure system and lugged rubber outsole with microglass inserts (provided for in subheading .19.90) FreeNo changeNo changeOn or before 12/31/

.

.

Winter cycling boots for women

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.87 Winter cycling boots with outer soles and uppers of rubber or plastics, for women, designed to be compatible with flat or clipless pedals, with or without removeable liner, the foregoing with boa closure system and lugged rubber outsole with microglass inserts (provided for in subheading .19.90) FreeNo changeNo changeOn or before 12/31/

.

.

Men's protective active footwear with waterproof soles, valued over $26 per pair, covering the ankle

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.88 Protective active footwear for men (except footwear with waterproof molded bottoms, including bottoms comprising an outer sole and all or part of the upper and except footwear with insulation that provides protection against cold weather) whose height from the bottom of the outer sole to the top of the upper does not exceed 15.34 cm, valued over $26/pr; where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to vent moisture (provided for in subheading .91.42), the foregoing other than footwear described in heading .13.95 FreeNo changeNo changeOn or before 12/31/

.

.

Women's protective active footwear with waterproof soles, valued over $27 per pair, 15.35'25.4 cm in height

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.89 Footwear for women, with outer soles and uppers of rubber or plastics (other than footwear described in subheading note 1 to chapter 64) that is designed for outdoor activities, such as hiking shoes, trekking shoes, running shoes and trail running shoes, which provides protection against water where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to permit moisture vapor transport from under the foot, with or without insulation, whose height from the bottom is at least 15.35 cm and does not exceed 25.4 cm, valued over $27/pr (provided for in subheading .91.50) FreeNo changeNo changeOn or before 12/31/

.

.

Children's protective active footwear with waterproof soles, valued over $18 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.90 Footwear for persons other than men or women, with outer soles and uppers of rubber or plastics (other than footwear described in subheading note 1 to chapter 64), that is designed for outdoor activities, such as hiking shoes, trekking shoes, running shoes and trail running shoes which provides protection against water where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to permit moisture vapor transport from under the foot, valued over $18/pr (provided for in subheading .91.50) FreeNo changeNo changeOn or before 12/31/

.

.

Men's protective active footwear with waterproof soles, valued over $27 per pair, 15.35'25.4 cm in height

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.91 Footwear for men, with outer soles and uppers of rubber or plastics (other than footwear described in subheading note 1 to chapter 64), that is designed for outdoor activities, such as hiking shoes, trekking shoes, running shoes and trail running shoes, valued over $27/pr, which provides protection against water where such protection is imparted by the use of a laminated textile and has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to permit moisture vapor transport from under the foot, with or without insulation, whose height from the bottom is at least 15.35 cm and does not exceed 25.4 cm (provided for in subheading .91.50) FreeNo changeNo changeOn or before 12/31/

.

.

Children's footwear valued over $15 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.92 Footwear for persons other than men or women, with outer soles and uppers of rubber or plastics (other than footwear described in subheading note 1 to chapter 64), that is designed for outdoor activities, such as hiking shoes, trekking shoes, running shoes and trail running shoes, which provides protection against water that is imparted by the use of a laminated textile fabric, valued over $15/pr (provided for in subheading .91.50); the foregoing, if valued over $18/pr, without openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to permit moisture vapor transport from under the foot FreeNo changeNo changeOn or before 12/31/

.

.

Women's protective active footwear, valued over $25 per pair, 15.35'25.4 cm in height

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.93 Footwear for women, with outer soles and uppers of rubber or plastics (other than footwear described in subheading note 1 to chapter 64), that is designed for outdoor activities, such as hiking shoes, trekking shoes, running shoes and trail running shoes, valued over $25/pr, which provides protection against water that is imparted by the use of a laminated textile fabric, with or without insulation, whose height from the bottom is at least 15.35 cm and does not exceed 25.4 cm (provided for in subheading .91.50); the foregoing, if valued over $27/pr, has openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to permit moisture vapor transport from under the foot 17.4%No changeNo changeOn or before 12/31/

.

.

Women's rubber or plastic footwear covering the ankle with fox-like banding

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.94 Women's footwear with outer soles and uppers of rubber or plastics, with or without foxing or foxing-like band, such footwear covering the ankle, with closed toe or heel; valued over $6.50 but not over $12/pr, the foregoing other than sports footwear and protective or slip-on type footwear (provided for in subheading .91.80) 6.3%No changeNo changeOn or before 12/31/

.

.

Cheer shoes covering the ankle

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.95 Women's footwear with outer soles and uppers of rubber or plastics; such outer soles measuring not over 14 mm in thickness, such footwear covering the ankle, with a welded thermoplastic polyurethane external ankle brace in each shoe, valued over $12/pr and weighing not more than 0.5 kg/pr (provided for in subheading .91.90) FreeNo changeNo changeOn or before 12/31/

.

.

Footwear for women, with 90 percent of the external surface of rubber or plastic, valued $15'$22 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.96 Footwear for women with outer soles and uppers of rubber or plastics, not covering the ankle, having uppers of which over 90 percent of the external surface area is rubber or plastics, such footwear other than tennis shoes, basketball shoes, gym shoes, training shoes and the like and other than work footwear; the foregoing valued $15/pr or higher and not over $22/pr (provided for in subheading .99.31) 5.5%No changeNo changeOn or before 12/31/

.

.

Sideline cheer shoes

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.97 Women's footwear with outer soles of rubber or plastics measuring not over 14 mm in thickness and with uppers of plastics, such footwear designed for use in cheerleading activities, weighing no more than 0.5 kg/pr (provided for in subheading .99.31) FreeNo changeNo changeOn or before 12/31/

.

.

Men's athletic footwear, valued under $9 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.98 Tennis shoes, basketball shoes, gym shoes, training shoes and the like, with outer soles and uppers of rubber or plastics, the foregoing for men, not covering the ankle and valued not over $9/pr (provided for in subheading .99.31) FreeNo changeNo changeOn or before 12/31/

.

.

Athletic footwear for women, valued not over $9 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.27.99 Tennis shoes, basketball shoes, gym shoes, training shoes and the like, with outer soles and uppers of rubber or plastics, for women, not covering the ankle, valued not over $9/pr (provided for in subheading .99.31), the foregoing other than footwear for women designed for use in cheerleading activities FreeNo changeNo changeOn or before 12/31/

.

.

Athletic footwear for children, valued not over $8 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.01 Tennis shoes, basketball shoes, gym shoes, training shoes and the like, with outer soles and uppers of rubber or plastics, for persons other than men or women, such footwear not covering the ankle and valued not over $8/pr (provided for in subheading .99.31) FreeNo changeNo changeOn or before 12/31/

.

.

Men's golf shoes, with outer soles and uppers of rubber or plastics, not covering the ankle, valued $15 per pair or over

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.02 Men's golf shoes, designed to be worn on- or off- course, with outer soles and uppers of rubber or plastics, not covering the ankle, having uppers of which over 90 percent of the external surface area is rubber or plastics, valued $15/pr or higher (provided for in subheading .99.31) 3.3%No changeNo changeOn or before 12/31/

.

.

Golf shoes other than for men, with outer soles and uppers of rubber or plastics, not covering the ankle, valued $15 per pair or over

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.03 Golf shoes, designed to be worn on- or off-course, with outer soles and uppers of rubber or plastics, not covering the ankle, having uppers of which over 90 percent of the external surface area is rubber or plastics, valued $15/pr or higher, for persons other than men (provided for in subheading .99.31) Free No changeNo changeOn or before 12/31/

.

.

Men's rubber/plastic footwear, valued not over $5 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.04 Footwear for men, with outer soles and uppers of rubber or plastics, not covering the ankle, valued not over $5/pr, the foregoing other than house slippers, work footwear and tennis shoes, basketball shoes, gym shoes, training shoes and the like (provided for in subheading .99.31) Free No changeNo changeOn or before 12/31/

.

.

Women's rubber/plastic footwear, valued not over $6 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.05 Footwear for women, with outer soles and uppers of rubber or plastics, not covering the ankle, valued not over $6/pr, the foregoing other than house slippers, work footwear and tennis shoes, basketball shoes, gym shoes, training shoes and the like (provided for in subheading .99.31) 4.3%No changeNo changeOn or before 12/31/

.

.

Children's athletic shoes with glitter uppers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.06 Tennis shoes, basketball shoes, gym shoes, training shoes and the like, having a foxing or a foxing-like band, other than for men or women; such footwear with outer soles and uppers of rubber or plastics with such uppers entirely covered with glitter on the exterior surface, valued over $6.50 but not over $12/pr (provided for in subheading .99.80) FreeNo changeNo changeOn or before 12/31/

.

.

Cheer shoes with sole less than 12 mm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.07 Women's footwear with outer soles and uppers of rubber or plastics, each sole measuring not over 12 mm in thickness, the foregoing footwear designed for use in cheerleading activities, valued over $12/pr and weighing not over 0.5 kg/pr (provided for in subheading .99.90) 1%No changeNo changeOn or before 12/31/

.

.

Men's golf shoes with outers and uppers of rubber or plastics, valued over $19 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.08 Golf shoes for men, designed to be worn on- or off-course, with outer soles and uppers of rubber or plastics, valued over $19/pr (provided for in subheading .99.90) 7.1%No changeNo changeOn or before 12/31/

.

.

Golf shoes other than for men, outer soles and uppers of rubber or plastics, valued over $19 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.09 Golf shoes with outer soles and uppers of rubber or plastics, designed to be worn on- or off-courses, such footwear valued over $19/pr, for persons other than men (provided for in subheading .99.90) FreeNo changeNo changeOn or before 12/31/

.

.

Men's golf shoes, outer soles of rubber, plastics, leather or composition leather and uppers of leather (except pigskin uppers)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.10 Golf shoes for men, with outer soles of rubber, plastics, leather or composition leather and uppers of leather (except pigskin uppers), not welt, the foregoing with spikes, sprigs, cleats, stops, clips, bars or the like intended to enhance traction and grip and other than footwear which contains laminated textile with openings in the bottom and/or side of the sole or covered openings in the upper above the sole, or a combination thereof, designed to vent moisture (provided for in subheading .19.30) 5%No changeNo changeOn or before 12/31/

.

.

Men's oxford work footwear with metal safety toe and internal metatarsal protection

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.11 Footwear for men, with outer soles of rubber or plastics and uppers of leather, not covering the ankle, each incorporating a protective toe cap of metal materials and an internal metatarsal guard meeting or exceeding ASTM F standards (provided for in subheading .40.60) FreeNo changeNo changeOn or before 12/31/

.

.

Oxford-style leather footwear with metal safety toe and static dissipating protection

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.12 Footwear for men or women, with outer soles of rubber or plastics and uppers of leather, not covering the ankle, each incorporating a protective toe cap of metal and with electrostatic dissipating properties meeting ASTM F standards with an ESD classification of SD-10 (provided for in subheading .40.60) FreeNo changeNo changeOn or before 12/31/

.

.

Women's leather footwear, lined with pigskin with zipper, valued $47'$60 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.13 Footwear for women, with outer soles and uppers of leather, covering the ankle, each with zipper closure, lined wholly or in part with pigskin, valued over $47 but not over $60/pr, whose height from the bottom of the outer sole to the top of the upper is over 43 cm, with a heel height over 60 mm (provided for in subheading .51.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's leather footwear, lined with pigskin, valued $31'$40 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.14 Footwear for women, with outer soles and uppers of leather, covering the ankle, each lined wholly or in part with pigskin, with zipper closure, valued over $31 but not over $40/pr, whose height from the bottom of the outer sole to the top of the upper does not exceed 21 cm, with a heel height over 70 mm (provided for in subheading .51.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's slip-on cow/calf hair footwear, valued $50'$60 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.15 Footwear of the slip-on type for women with outer soles and uppers of leather, covering the ankle, lined wholly or in part with pigskin, valued over $50 but not over $60/pr, whose height from the bottom of the outer sole to the top of the upper is over 50 cm, with a heel height over 90 mm (provided for in subheading .51.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's leather footwear lined with sheepskin

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.16 Footwear for women with outer soles and uppers of leather, having open toe and/or open heel and with buckle closure, with lining wholly or in part of sheepskin, valued over $23 but not over $27/pr, heel height under 26 mm (provided for in subheading .59.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's leather slip-on footwear lined with sheep leather

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.17 Footwear for women, with outer soles and uppers of leather, each with open toe and/or open heel; of the slip-on type, that is, held to the foot without the use of laces or buckles or other fasteners; lined wholly or in part of sheep leather; valued over $18 but not over $26/pr; with heel height over 60 mm but not over 90 mm (provided for in subheading .59.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's leather slip-on footwear lined with pigskin

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.18 Footwear for women with outer soles and uppers of leather; of the slip-on type, that is, held to the foot without the use of laces or buckles or other fasteners; with lining wholly or in part of pigskin, valued over $21 but not over $27/pr, heel height under 26 mm (provided for in subheading .59.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's leather footwear, lined with pigskin, valued $21'$27 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.19 Footwear for women with outer soles and uppers of leather, with open toe and/or open heel and with buckle closure, with lining wholly or in part of pigskin, valued over $21 but not over $27/pr, with heel height over 60 mm but not over 90 mm (provided for in subheading .59.90) FreeNo changeNo changeOn or before 12/31/

.

.

Men's mid-cut work footwear with composite safety toe and waterproof leather uppers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.20 Work footwear for men, with outer soles of rubber or plastics and uppers of leather, covering the ankle to a height of less than 15.24 cm, each incorporating a protective toe cap of materials other than metal and with waterproof leather upper (provided for in subheading .91.60) FreeNo changeNo changeOn or before 12/31/

.

.

Men's leather upper footwear, San Crispino construction, valued over $32 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.21 Footwear for men, with uppers of leather (other than pigskin) and outer soles of rubber or plastics (except vulcanized footwear and footwear with waterproof molded or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper), valued over $32/pr, covering the ankle but not covering the knee; other than work footwear, tennis shoes, basketball shoes, gym shoes, training shoes and the like, and other than footwear designed as a protection against water; the foregoing footwear incorporating a stitch-down footwear construction technique where upper material is flared outward and wrapped around and under the edge of an extended insole board and the upper is then stitched close to the last and cemented to the sole (provided for in subheading .91.60) FreeNo changeNo changeOn or before 12/31/

.

.

Men's leather upper athletic footwear

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.22 Tennis shoes, basketball shoes, gym shoes, training shoes and the like, for men, with uppers of leather (other than pigskin) and outer soles of rubber or plastics, in which elastic strips are attached to either side of the tongue and anchored beneath the insole (provided for in subheading .91.60) 7.6%No changeNo changeOn or before 12/31/

.

.

Women's footwear with leather uppers, lined with pigskin, valued $37'$43 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.23 Footwear for women, with outer soles of rubber or plastics and uppers of leather, each with closed toe and closed heel, covering the ankle, zipper closure, lined wholly or in part with pigskin, whose height from the bottom of the outer sole to the top of the upper is over 42 cm but not over 49 cm, valued over $37 but not over $43/pr (provided for in subheading .91.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's footwear with leather uppers, lined with pigskin, valued $88'$102 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.24 Footwear for women, with outer soles of rubber or plastics and uppers of leather, each with closed toe and closed heel, covering the ankle and calf of the leg, zipper closure, lined wholly or in part with pigskin, whose height from the bottom of the outer sole to the top of the upper is over 47 cm but not over 49 cm, valued over $88 but not over $102/pr (provided for in subheading .91.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's footwear with leather uppers, lined with pigskin, valued $24'$32 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.25 Footwear for women, with uppers of leather and outer soles of rubber or plastics, each with closed toe and closed heel, covering the ankle and with zipper closure, lined wholly or in part with pigskin, whose height from the bottom of the outer sole to the top of the upper is over 15 cm but not over 24 cm, with a heel height at least 85 mm, valued over $24 but not over $32/pr (provided for in subheading .91.90) 3.8%No changeNo changeOn or before 12/31/

.

.

Women's footwear with leather uppers, lined with pigskin, valued $57'$62 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.26 Footwear for women, with outer soles of rubber or plastics and uppers of leather, each with closed toe and closed heel, with the shaft of the boot covering the ankle but not extending to the knee, zipper closure, lined wholly or in part with pigskin, whose height from the bottom of the outer sole to the top of the upper is over 23 cm but not over 25 cm and with a heel height over 90 mm, such footwear valued over $57 but not over $62/pr (provided for in subheading .91.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's footwear with leather uppers, strap with closed toe and open heel

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.27 Footwear for women, with outer soles of rubber or plastics and uppers of leather, each with closed toe and open heel, a strap covering the ankle and zipper closure, valued over $24 but not over $26/pr (provided for in subheading .91.90) FreeNo changeNo changeOn or before 12/31/

.

.

Open toe women's footwear, valued over $23 but not over $27 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.28 Footwear for women, with outer soles of rubber or plastics and uppers of leather, each with open toe, covering the ankle, having zipper closure at the medial side, lined wholly or in part with pigskin, whose height from the bottom of the outer sole to the top of the upper does not exceed 18 cm, valued over $23 but not over $27/pr (provided for in subheading .91.90) FreeNo changeNo changeOn or before 12/31/

.

.

Slip-on footwear for women, valued over $24 but not over $27 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.29 Footwear for women, with outer soles of rubber or plastics and uppers of leather, each with closed toe and closed heel, of the slip-on type, covering the ankle but not extending past the mid-calf, lined wholly or in part with pigskin, valued over $24 but not over $27/pr (provided for in subheading .91.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's footwear with leather uppers, lined with pigskin, closed toe or heel with functional zippers on sides

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.30 Footwear for women, with outer soles of rubber or plastics and uppers of leather, each with closed toe and closed heel, covering the ankle, functional zipper on the medial side and a functional zipper on the lateral side, lined wholly or in part with pigskin, with foxing or foxing-like band, whose height from the bottom of the outer sole to the top of the upper does not exceed 14 cm, valued over $18 but not over $22/pr (provided for in subheading .91.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's footwear with leather uppers, lined with pigskin, closed toe or heel with zipper closure, height of 43'48 cm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.31 Footwear for women, with outer soles of rubber or plastics and uppers of leather, each with closed toe and closed heel, covering the ankle, zipper closure, lined wholly or in part with pigskin, whose height from the bottom of the outer sole to the top of the upper is over 43 cm but not over 48 cm, valued over $43 but not over $57/pr (provided for in subheading .91.90) 4.8%No changeNo changeOn or before 12/31/

.

.

Women's footwear with leather uppers, lined with pigskin covering the knee

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.32 Footwear for women, with outer soles of rubber or plastics and uppers of leather, each with closed toe and closed heel, covering the knee, zipper closure, lined wholly or in part with pigskin, valued over $40 but not over $45/pr (provided for in subheading .91.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's footwear with leather uppers, lined with pigskin, closed toe or heel with zipper closure, height of 48'52 cm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.33 Footwear for women, with uppers of leather and outer soles of rubber or plastics, each with closed toe and closed heel, whose height from the bottom of the outer sole to the top of the upper is over 48 cm but not over 52 cm, zipper closure, lined wholly or in part with pigskin, valued over $76 but not over $80/pr (provided for in subheading .91.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's footwear with leather uppers, open toe with strap and buckle, valued $14'$25 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.34 Footwear for women, with outer soles of rubber or plastics and uppers of leather, open toe, each with a strap that wraps around the leg and a functional buckle, valued over $14 but not over $25/pr (provided for in subheading .91.90) 5.1%No changeNo changeOn or before 12/31/

.

.

Women's slip-on footwear with bovine leather uppers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.35 Footwear for women, with outer soles of rubber or plastics and uppers of bovine leather, each with closed toe and closed heel, of the slip-on type and with elasicized straps around the ankle, such footwear valued over $12 but not over $14/pr (provided for in subheading .91.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's footwear with leather uppers, lined with pigskin with adjustable laces

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.36 Footwear for women, with outer soles of rubber or plastics and uppers of leather, closed toe and heel, such footwear covering the ankle, having closure with adjustable laces, lined wholly or in part with pigskin, whose height from the bottom of the outer sole to the top of the upper is over 21 cm but not over 23 cm, with a heel height of at least 75 mm, valued over $36 but not over $38/pr (provided for in subheading .91.90) FreeNo changeNo changeOn or before 12/31/

.

.

Men's waterproof leather footwear, valued $27 per pair or higher

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.37 Footwear for men, with uppers of leather (other than of pigskin) and outer soles of rubber or plastics (other than house slippers, work footwear, tennis shoes, basketball shoes, gym shoes, training shoes and the like, and other than slip-on footwear), such footwear not covering the ankle, valued $27/pr or higher, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a laminated textile fabric (provided for in subheading .99.60), the foregoing other than footwear with openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to vent moisture 4.1%No changeNo changeOn or before 12/31/

.

.

Men's or boys' golf shoes, valued $30 per pair or higher

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.38 Golf shoes for men, youths and boys, designed to be worn on- or off-course, with outer soles of rubber, plastics, leather or composition leather and uppers of leather (except pigskin uppers), valued $30/pr or higher, such footwear not covering the ankle, other than footwear which contains laminated textile with openings in the bottom and/or side of the sole or covered openings in the upper above the sole, or a combination thereof, designed to vent moisture (provided for in subheading .99.60) 4.7%No changeNo changeOn or before 12/31/

.

.

Competitive cheer shoes with leather uppers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.39 Women's footwear with uppers of leather and outer soles of rubber or plastics, such soles measuring not over 9 mm in thickness, the foregoing designed for use in cheerleading activities, valued over $2.50/pr and weighing no more than 0.5 kg/pr (provided for in subheading .99.90) FreeNo changeNo changeOn or before 12/31/

.

.

Children's waterproof leather footwear, not covering the ankle, valued $14 per pair or higher

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.40 Footwear for persons other than men or women, with uppers of leather (other than of pigskin) and outer soles of rubber or plastics (other than house slippers, work footwear, tennis shoes, basketball shoes, gym shoes, training shoes and the like and other than slip-on footwear), not covering the ankle, valued $14/pr or higher; such footwear designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a laminated textile fabric (provided for in subheading .99.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's footwear with leather uppers, open toe with strap and buckle, valued $12.50'$28 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.41 Footwear for women, with outer soles of rubber or plastics and uppers of leather, each with open toe, a strap that covers less than 50 percent of the ankle bone and includes a functional buckle and a heel height of at least 40 mm but no higher than 110 mm, valued at $12.50 or more but not over $28/pr (provided for in subheading .99.90) 6.6%No changeNo changeOn or before 12/31/

.

.

Women's footwear with leather uppers, closed toe with strap and buckle

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.42 Footwear for women, with outer soles of rubber or plastics and uppers of leather, each with closed toe, a strap that covers less than 50 percent of the ankle bone and includes a functional buckle, a heel height of at least 40 mm but no higher than 110 mm, valued at $16 or more but not over $20/pr (provided for in subheading .99.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's footwear with leather uppers, with strap and buckle, valued $27'$40 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.43 Footwear for women, with outer soles of rubber or plastics and uppers of leather, each with a strap that wraps around the leg above the ankle bone and includes a functional buckle, a heel height of 92 mm or more but not over 97 mm, valued at $27 or more but not over $40/pr (provided for in subheading .99.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's footwear with leather uppers, with strap and buckle, valued $12.70'$18.70 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.44 Footwear for women, with outer soles of rubber or plastics and uppers of leather, each with a strap that wraps around the leg above the ankle bone and includes a functional buckle, a heel height of at least 75 mm but no higher than 105 mm, valued at $12.70 or more but not over $18.70/pr (provided for in subheading .99.90) FreeNo changeNo changeOn or before 12/31/

.

.

Children's leather upper athletic footwear, valued not over $9 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.45 Tennis shoes, basketball shoes and the like, for persons other than men or women, such footwear with uppers of leather and outer soles of rubber or plastics, valued over $2.50/pr but not over $9/pr (provided for in subheading .99.90) FreeNo changeNo changeOn or before 12/31/

.

.

Men's athletic type footwear with uppers of textile materials of vegetable fibers and outer soles of rubber or plastic with textile flocking

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.46 Men's footwear with uppers of vegetable fibers and outer soles of rubber or plastics, having outer soles with textile materials having the greatest surface area in contact with the ground, of an athletic type, with or without foxing or foxing-like band; such footwear valued over $6.50 but not over $12/pr (provided for in subheading .11.81) FreeNo changeNo changeOn or before 12/31/

.

.

Athletic footwear for men, with a bellows tongue, valued over $6.50 but not over $12 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.47 Tennis shoes, basketball shoes, gym shoes, training shoes and the like, for men, with outer soles of rubber or plastics and uppers of textile materials other than vegetable fibers, such footwear having a bellows tongue, valued over $6.50 but not over $12/pr, such outer soles with textile materials having the greatest surface area in contact with the ground but not taken into account under the terms of additional U.S. note 5 to chapter 64 (provided for in subheading .11.85) 10.3%No changeNo changeOn or before 12/31/

.

.

Athletic footwear for women, with a bellows tongue, valued over $6.50 but not over $12 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.48 Tennis shoes, basketball shoes, gym shoes, training shoes and the like, for women, with outer soles of rubber or plastics and uppers of textile materials other than vegetable fibers, each having a bellows tongue, valued over $6.50 but not over $12/pr, such outer soles with textile materials having the greatest surface area in contact with the ground but not taken into account under the terms of additional U.S. note 5 to chapter 64 (provided for in subheading .11.85) 10%No changeNo changeOn or before 12/31/

.

.

Athletic footwear for children, bellows tongue, valued over $6.50 but not over $12 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.49 Tennis shoes, basketball shoes, gym shoes, training shoes and the like, for persons other than men and women, such footwear with outer soles of rubber or plastics and uppers of textile materials other than vegetable fibers, having a bellows tongue, valued over $6.50 but not over $12/pr, such outer soles with textile materials having the greatest surface area in contact with the ground but not taken into account under the terms of additional U.S. note 5 to chapter 64 (provided for in subheading .11.85) 7.7%No changeNo changeOn or before 12/31/

.

.

Athletic footwear for men, valued over $6.50 but not over $9 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.50 Tennis shoes, basketball shoes, gym shoes, training shoes and the like, for men, with outer soles of rubber or plastics and uppers of textile materials other than vegetable fibers, in which elastic strips are attached to either side of the tongue and anchored beneath the insole, valued over $6.50 but not over $9/pr, such outer soles with textile materials having the greatest surface area in contact with the ground but not taken into account under the terms of additional U.S. note 5 to chapter 64 (provided for in subheading .11.85) 10.3%No changeNo changeOn or before 12/31/

.

.

Athletic footwear for children, valued over $6.50 but not over $9 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.51 Tennis shoes, basketball shoes, gym shoes, training shoes and the like, for persons other than men or women, such footwear with outer soles of rubber or plastics and uppers of textile materials other than vegetable fibers, in which elastic strips are attached to either side of the tongue and anchored beneath the insole, valued over $6.50 but not over $9/pr, such outer soles with textile materials having the greatest surface area in contact with the ground but not taken into account under the terms of additional U.S. note 5 to chapter 64 (provided for in subheading .11.85) 6.8%No changeNo changeOn or before 12/31/

.

.

Men's waterproof footwear, valued over $15 per pair, covering the ankle

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.52 Footwear for men, with outer soles of rubber and uppers of textile materials (except vulcanized footwear and footwear with waterproof molded or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported), each with closed toe and closed heel, covering the ankle, lace-up, athletic type, valued over $15/pr, other than ski boots, cross country ski footwear and snowboard boots; such footwear designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile in the upper (provided for in subheading .11.90) FreeNo changeNo changeOn or before 12/31/

.

.

Men's waterproof footwear, valued over $13 per pair, not covering the ankle

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.53 Footwear for men, with outer soles of rubber and uppers of textile materials (except vulcanized footwear and footwear with waterproof molded or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported), each with closed toe and closed heel, not covering the ankle, lace-up, athletic type, valued over $13/pr; other than ski boots, cross country ski footwear and snowboard boots; the foregoing footwear designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile in the upper (provided for in subheading .11.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's waterproof footwear, valued over $15 per pair, covering the ankle

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.54 Footwear for women, with outer soles of rubber and uppers of textile materials (except vulcanized footwear and footwear with waterproof molded or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported), each with closed toe and closed heel, covering the ankle, lace-up, athletic type, valued over $15/pr; other than ski boots, cross country ski footwear and snowboard boots; the foregoing footwear designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile in the upper (provided for in subheading .11.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's waterproof footwear, valued over $13 per pair, not covering the ankle

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.55 Footwear for women, with outer soles of rubber and uppers of textile materials (except vulcanized footwear and footwear with waterproof molded or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported), each with closed toe and closed heel, below the ankle, lace-up, athletic type, valued over $13/pr, other than ski boots, cross country ski footwear and snowboard boots; such footwear designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated textile in the upper (provided for in subheading .11.90)FreeNo changeNo changeOn or before 12/31/

.

.

Cheer shoes with uppers of textile materials

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.56 Footwear for women, with outer soles of rubber or plastics measuring not over 14 mm in thickness and with uppers of textile materials, such footwear designed for use in cheerleading activities, valued over $12/ pr and weighing no more than 0.5 kg/pr (provided for in subheading .11.90) FreeNo changeNo changeOn or before 12/31/

.

.

Men's golf shoes, uppers of textile materials

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.57 Golf shoes designed to be worn on- or off- course, for men, with outer soles of rubber or plastics and uppers of textile materials, the foregoing with spikes, sprigs, cleats, stops, clips, bars or the like intended to enhance traction and grip, valued at $15/pr or higher, other than footwear which contains laminated textile with openings in the bottom and/or side of the sole or covered openings in the upper above the sole, or a combination thereof, designed to vent moisture (provided for in subheading .11.90) 16.6% No changeNo changeOn or before 12/31/

.

.

Golf shoes other than for men, uppers of textile materials

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.58 Golf shoes other than for men, designed to be worn on- or off-course, with outer soles of rubber or plastics and uppers of textile materials, the foregoing with spikes, sprigs, cleats, stops, clips, bars or the like intended to enhance traction and grip, valued over $15/pr or higher, other than footwear which contains laminated textile with openings in the bottom and/or side of the sole or covered openings in the upper above the sole, or a combination thereof, designed to vent moisture (provided for in subheading .11.90) 2.1% No changeNo changeOn or before 12/31/

.

.

Women's footwear with textile uppers and 50 percent or more of the surface area of which is leather

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.59 Footwear for women, with outer soles of rubber or plastics and uppers of textile materials, having uppers of which over 50 percent of the external surface area (including any leather accessories or reinforcements) is leather, the foregoing other than sports footwear, tennis shoes, basketball shoes, training shoes and the like (provided for in subheading .19.15) Free No changeNo changeOn or before 12/31/

.

.

Shoe and boot covers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.60 Footwear comprising shoe and boot covers, each measuring 10 cm or more in length and less than 50 cm in length and 10 cm or more in height and less than 50 cm in height, with outer soles plastics and uppers of non-woven fabric (provided for in subheading .19.20) 23.7 %No changeNo changeOn or before 12/31/

.

.

Women's footwear with textile uppers, open toes or heels, valued $15'$30 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.61 Footwear with outer soles of rubber or plastics, with uppers of textile material other than vegetable fibers and having outer soles with textile materials having the greatest surface area in contact with the ground, but not taken into account under the terms of additional note U.S. note 5 to chapter 64, with open toes or open heels or of the slip-on type, weighing 10 percent or more of rubber or plastics, valued $15/pr or higher but not more than $30/pr; the foregoing for women (other than house slippers) (provided for in subheading .19.37) 11.3%No changeNo changeOn or before 12/31/

.

.

Men's textile upper footwear, with open toes or open heels, valued not over $12 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.62 Footwear for men, with open toes or open heels, other than house slippers; the foregoing with outer soles of rubber or plastics and uppers of textile materials, such uppers consisting of straps not exceeding 26 mm in width and having no heel straps, valued not over $12/pr (provided for in subheading .19.39) 16.4%No changeNo changeOn or before 12/31/

.

.

Women's textile upper footwear, with open toes or open heels, valued not over $12 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.63 Footwear for women, with open toes or open heels and other than house slippers; such footwear with outer soles of rubber or plastics and uppers of textile materials, such uppers consisting of straps not exceeding 26 mm in width and having no heel straps, valued not over $12/pr (provided for in subheading .19.39) 30.2%No changeNo changeOn or before 12/31/

.

.

Children's textile upper footwear, with open toes or open heels, valued not over $12 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.64 Footwear for persons other than men or women, such footwear with open toes or open heels (other than house slippers), with outer soles of rubber or plastics and uppers of textile materials, with straps not exceeding 20 mm in width and having no heel straps, valued not over $12/pr (provided for in subheading .19.39) 20.2%No changeNo changeOn or before 12/31/

.

.

Oxford footwear with textile upper and composite toe, valued at $12'$20 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.65 Footwear for men or women, with outer soles of rubber or plastics and uppers of textile materials, not covering the ankle, valued over $12/pr but not over $20/pr, each incorporating a protective toe cap of materials other than metal (provided for in subheading .19.90) 0.2%No changeNo changeOn or before 12/31/

.

.

Oxford-style footwear for men or women with textile uppers, with an alloy safety toecap and static dissipating protection

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.66 Footwear for men or women, with outer soles of rubber or plastics and uppers of textile materials, not covering the ankle, valued over $12/pr, each incorporating a protective toe cap of alloy materials and with electrostatic dissipating properties meeting ASTM F standards with an ESD classification of SD-10 (provided for in subheading .19.90) FreeNo changeNo changeOn or before 12/31/

.

.

Oxford-style work footwear with steel safety toe and static dissipating protection

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.67 Footwear for men or women, with outer soles of rubber or plastics and uppers of textile materials, not covering the ankle, valued at over $12/pr, incorporating a protective toe cap of steel and with electrostatic dissipating properties meeting ASTM F standards with an ESD classification of SD-10 (provided for in subheading .19.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's footwear, covering the ankle but not the knee, valued over $24 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.68 Footwear for women, with outer soles of rubber or plastics and uppers of textile materials, valued over $24/pr, covering the ankle but not covering the knee (provided for in subheading .19.90) FreeNo changeNo changeOn or before 12/31/

.

.

Men's textile upper footwear, not covering the ankle, valued over $24 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.69 Footwear for men, with outer soles of rubber or plastics and uppers of textile materials, not covering the ankle, valued over $24/pr (provided for in subheading .19.90) 7.6%No changeNo changeOn or before 12/31/

.

.

Oxford footwear with textile uppers and composite toe, valued over $20 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.70 Footwear for men or women, with outer soles of rubber or plastics and uppers of textile materials, not covering the ankle, valued over $20/pr, incorporating a protective toe cap of materials other than metal (provided for in subheading .19.90) FreeNo changeNo changeOn or before 12/31/

.

.

Men's mid-cut footwear with a textile upper and a protective toe cap

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.71 Footwear for men, with outer soles of rubber or plastics and uppers of textile materials, covering the ankle to a height of less than 15.24 cm, incorporating a protective toe cap of alloy materials, valued over $12/pr (provided for in subheading .19.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's footwear with leather soles and textile uppers, open toes or heels, valued $12'$24 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.72 Footwear for women with outer soles of leather or composition leather and uppers of textile materials, each with open toe and/or open heel, not over 50 percent by weight of textile materials and rubber or plastics with at least 10 percent by weight being rubber or plastics, valued over $12.00 but not over $24.00/pr (provided for in subheading .20.40) FreeNo changeNo changeOn or before 12/31/

.

.

Footwear for women valued over $20 but not over $24 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.73 Footwear for women with outer soles of leather or composition leather and uppers of textile materials, with closed toe and closed heel, not over 50 percent by weight of textile materials and rubber or plastics with at least 10 percent by weight being rubber or plastics; such footwear with a heel counter of pig suede and a zipper at the back of the shoe, each shoe featuring at least one strap that wraps around the leg above the ankle and does not cover the ankle; the foregoing valued over $20 but not over $24/pr (provided for in subheading .20.40) FreeNo changeNo changeOn or before 12/31/

.

.

Women's footwear with leather soles and textile uppers, valued $15'$20 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.74 Footwear for women with outer soles of leather or composition leather and uppers of textile materials, not elsewhere specified or included, valued over $15 but not over $20/pr, the foregoing other than footwear containing less than 10 percent by weight of rubber or plastics and other than containing 50 percent or less by weight of textile materials and rubber or plastics with at least 10 percent by weight being rubber or plastics (provided for in subheading .20.60) FreeNo changeNo changeOn or before 12/31/

.

.

Women's footwear with leather soles and textile uppers, valued $20'$25 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.75 Footwear for women, with outer soles of leather or composition leather and uppers of textile materials, not elsewhere specified or included, valued over $20 but less than $25/pr; the foregoing other than footwear containing less than 10 percent by weight of rubber or plastics and other than containing 50 percent or less by weight of textile materials and rubber or plastics with at least 10 percent by weight being rubber or plastics (provided for in subheading .20.60) FreeNo changeNo changeOn or before 12/31/

.

.

Women's footwear with cork soles and textile uppers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.76 Footwear for women, with uppers of textile materials and outer soles of cork or agglomerated cork, each with open toe and/or open heel, valued over $13 but not over $18/pr (provided for in subheading .20.90) FreeNo changeNo changeOn or before 12/31/

.

.

Men's footwear with felt soles, not covering the ankle, valued $20 per pair or higher

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.77 Footwear for men, with uppers of which over 30 percent of the external surface is polyurethane measuring 0.25 mm in thickness, with cemented outer soles of which over 50 percent of the external surface is felt, having the characteristics required for normal use, including durability and strength; the foregoing not covering the ankle and valued $20/pr or higher (provided for in subheading .20.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's and girls' footwear with cork uppers, valued less than $25 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.78 Women's and girls' footwear with uppers of cork (other than disposable and designed for one-time use), valued less than $25/pr (provided for in subheading .90.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's footwear with cow/calf hair uppers, valued $35'$40 per pair, covering the ankle

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.79 Footwear for women, with uppers of cow or calf hair and outer soles of rubber or plastics, such footwear with closed toe and heel, covering the ankle, with a lace closure, having an upper with exterior surface area over 80 percent cow or calf hair, valued over $35 but not over $40/pr (provided for in subheading .90.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's footwear with cow/calf hair uppers, valued $35'$40 per pair, not covering the ankle

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.80 Footwear for women, with uppers of cow or calf hair and outer soles of rubber or plastics, each with closed toe and closed heel, not covering the ankle, of the slip-on type, having an upper with exterior surface area over 70 percent cow or calf hair, valued over $35 but not over $40/pr (provided for in subheading .90.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's footwear with cow/calf hair uppers, valued $19'$25 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.81 Footwear for women, with uppers of cow or calf hair and outer soles of rubber or plastics, each with closed toe and closed heel, not covering the ankle, of the slip-on type, having an upper with exterior surface area over 85 percent cow or calf hair, valued over $19 but not over $25/pr (provided for in subheading .90.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's footwear with cow/calf hair uppers, valued $50'$55 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.82 Footwear for women, with uppers of cow or calf hair and outer soles of rubber or plastics, such footwear covering the ankle, with zipper closure, with exterior surface area over 70 percent cow or calf hair, valued over $50 but not over $55/pr (provided for in subheading .90.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's footwear, leather soles and rubber/plastic uppers, valued $16'$18 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.83 Footwear for women with uppers of rubber or plastics and outer soles of composition leather, with open toe and/or heel, valued over $16 but not over $18/pr (provided for in subheading .90.90) FreeNo changeNo changeOn or before 12/31/

.

.

Women's footwear with cow/calf hair uppers, valued $19'$34 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.84 Footwear for women, with uppers of cow or calf hair and outer soles of rubber or plastics, such footwear covering the ankle, with zipper or buckle closure, with exterior surface area over 90 percent of cow or calf hair, valued over $19 but not over $34/pr (provided for in subheading .90.90) FreeNo changeNo changeOn or before 12/31/

.

.

Footwear for women, valued over $50 but not over $60 per pair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.85 Footwear of the slip-on type, for women, with uppers of cow or calf hair and outer soles of rubber or plastics, such footwear with closed toe and heel, covering the ankle, having an upper with exterior surface area over 90 percent cow or calf hair, whose height from the bottom of the outer sole to the top of the upper is over 42 cm, valued over $50 but not over $60/pr (provided for in subheading .90.90) FreeNo changeNo changeOn or before 12/31/

.

.

Calf hair upper footwear

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.86 Footwear with uppers of calf hair (provided for in subheading .90.90), the foregoing other than goods described in any other heading of this subchapter 3.1%No changeNo changeOn or before 12/31/

.

.

Gaiters of man-made fibers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.87 Woven gaiters of man-made fibers, not containing elastomeric fiber, seamless, each with full front hook-and-loop closure, boot lace loop attachment, with webbing or cord at the top for tightening and boot strap at the bottom (provided for in subheading .90.15) FreeNo changeNo changeOn or before 12/31/

.

.

Hats of vegetable fibers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.88 Hats and other headgear of vegetable fibers, of unspun fibrous vegetable materials or of paper yarn, sewed (provided for in subheading .00.30) FreeNo changeNo changeOn or before 12/31/

.

.

Hairnets

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.89 Hair-nets (provided for in subheading .00.01) 1%No changeNo changeOn or before 12/31/

.

.

Cotton knit hats, valued $8 or less

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.90 Women's and girls' hats and other headgear, of cotton, knitted, other than visors or hats that provide no covering for the crown of the head; such goods valued up to $8 each (provided for in subheading .00.15); the foregoing other than hats and other headgear described in subheading .14.63 Free No changeNo changeOn or before 12/31/

.

.

Babies' woven cotton hats

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.91 Babies' headwear of cotton, not knitted (provided for in subheading .00.20) Free No changeNo changeOn or before 12/31/

.

.

Hats of man-made fiber, valued $5'$25

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.92 Hats and other headgear, of man-made fibers, knitted or crocheted or made up from knitted or crocheted fabrics in the piece (but not in strips), not in part of braid, each valued at least $5 but not more than $12 (provided for in subheading .00.60) 6.4% No changeNo changeOn or before 12/31/

.

.

Waterproof and insulated hats with ear flaps, valued over $15

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.93 Dome-shaped hats, of man-made fibers, each with ear flaps constructed entirely of 2-layer laminate consisting of woven face fabric wholly of polyester and expanded polytetrafluoroethylene (PTFE) membrane, each such hat fully lined with woven ripstop fabric wholly of nylon, the crown and earflaps having insulation wholly of polyester, adjustable by a 2 mm elastic cord covered in a braided textile sheath and back cord lock; such hats valued over $15 each (provided for in subheading .00.90) Free No changeNo changeOn or before 12/31/

.

.

Fishing wading staffs

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.94 Wading sticks of carbon fiber, each measuring 3.5 cm to 4.5 cm in diameter, adjustable from approximately 129.5 cm to 142.2 cm in length and weighing 227 g; the foregoing not put up for sale in pairs (provided for in heading .00.00) Free No changeNo changeOn or before 12/31/

.

.

Plastic plants for aquariums, not glued or bound

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.95 Foliage and flowers of plastics, representing desert or underwater plants, each inserted directly into a base or suction cup, measuring not over 55.88 cm in height, not assembled by gluing or similar means or by binding with flexible materials such as wire, paper, textile materials or foil; the foregoing presented put up for retail sale as goods designed for a household terrarium or aquarium (provided for in subheading .10.40) Free No changeNo changeOn or before 12/31/

.

.

Natural stone ledger tile of sandstone

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.96 Natural stone tiles of sandstone; such cut pieces each measuring less than 6.985 cm in width and 6.985 cm in length and collectively glued together or to a mesh backing to form a panel; such finished tiles measuring 15.24 cm or more but not over 40.64 cm in width and 45.72 cm or more but not over 60.96 cm in length (provided for in subheading .10.00) Free No changeNo changeOn or before 12/31/

.

.

Marble mosaic and pebble tiles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.97 Marble mosaic and pebble tiles, each with the individual mosaic and pebble pieces measuring 50.8 mm in width and ranging from 50.8 mm to 152.4 mm in length; each tile measuring approximately 304.8 mm wide and 304.8 mm long (provided for in subheading .10.00) 2.6% No changeNo changeOn or before 12/31/

.

.

Natural stone limestone tiles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.98 Natural stone tiles made of limestone quarried from India with a surface area greater than 101.6 mm square and ranging in size from 50.8 to 304.8 mm in width and 152.4 mm to 406.44 mm in length; the foregoing honed and 12.7 mm in thickness (provided for in subheading .91.05) Free No changeNo changeOn or before 12/31/

.

.

Natural stone marble tiles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.28.99 Natural stone tiles made of marble quarried from Greece, Italy, Turkey, and Spain, each tile with a surface area greater than 101.6 mm2; the foregoing in sizes ranging from 50.8 to 304.8 mm in width and 152.4 mm to 406.44 mm in length (provided for in subheading .91.05) 1%No changeNo changeOn or before 12/31/

.

.

Waterjet natural stone mosaic tile

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.01 Waterjet cut mosaic tiles, composed of natural marble stone, such marble stone tiles measuring more than 7 cm in width and more than 7 cm in length and covering over 50 percent of the surface area, in combination with tiles of glass, metal, mother of pearl or other materials, with surface faces honed or polished and edges worked beyond simple straight cuts and affixed to a mesh backing, having a width not less than 22.86 cm but not more than 45.72 cm and a length not less than 20.32 cm but not more than 45.72 cm (provided for in subheading .91.15) 2.2% No changeNo changeOn or before 12/31/

.

.

Marble entertaining and serveware

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.02 Serving trays, serving boards, cake stands, bowls, pastry boards, rolling pins and similar articles of marble, for preparing or serving food (provided for in subheading .91.15) 1%No changeNo changeOn or before 12/31/

.

.

Articles of marble for kitchen and dining room

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.03 Coasters, trivets, paper towel holders, napkin holders and similar articles of marble, the foregoing designed for use in the home and not for contact with food (provided for in subheading .91.15) 1%No changeNo changeOn or before 12/31/

.

.

Natural stone ledger tiles of travertine

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.04 Natural stone tiles of travertine, each composed of small, cut pieces of travertine; such cut pieces each measuring less than 69.85 mm in width and 68.85 mm in length and collectively glued to a mesh backing; such finished tiles measuring 152.4 mm or more but not over 406.4 mm in width and 457.2 mm or more but not over 609.6 mm in length (provided for in subheading .91.25) 0.6% No changeNo changeOn or before 12/31/

.

.

Travertine decorative tile

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.05 Travertine decorative tiles with smooth-satin finish, rectangular-shaped, each tile measuring 50.8 mm or more but not more than 203.2 mm in width and 101.6 mm or more but not more than 304.8 mm in length (provided for in subheading .91.25) Free No changeNo changeOn or before 12/31/

.

.

Limestone decorative tiles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.06 Limestone decorative tiles each with smooth-satin finish and rectangular-shaped stones, each tile measuring in size from 12.7 mm to 101.6 mm in width and 152.4 mm to 406.4 mm in length (provided for in subheading .91.25) Free No changeNo changeOn or before 12/31/

.

.

Blank, embossed, and printed stoneware coaster disks and trivets

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.07Blank, embossed and printed stoneware coaster disks and trivets (provided for in subheading .00.48) Free No changeNo changeOn or before 12/31/

.

.

Rolled green glass sheets

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.08 Rolled glass in sheets, of a yellow-green color not colored throughout the mass, not finished or edged-worked, textured on one surface imparted by the rolling process, imported in sheets of a width not exceeding 1,600 mm and a length not exceeding 900 mm, having a thickness not exceeding 6 mm (provided for in subheading .19.00) 0.2% No changeNo changeOn or before 12/31/

.

.

Framed rear-view mirrors

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.09 Framed rear-view mirrors, such goods comprising parts of machines of heading or vehicles of heading , or , such mirrors measuring not over 929 cm2 in reflecting area and not containing LED or fluorescent lighting (provided for in subheading .10.00) 1.4%No changeNo changeOn or before 12/31/

.

.

Wall mirrors, unframed

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.10 Glass mirrors, unframed, each greater than 5,000 cm2 in reflecting area, not containing LED or fluorescent lighting, designed for mounting on the wall (provided for in subheading .91.50) Free No changeNo changeOn or before 12/31/

.

.

Wall mirrors, framed

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.11 Glass mirrors, framed, each greater than 5,000 cm2 in reflecting area, not containing LED or fluorescent lighting, designed for mounting on the wall (provided for in subheading .92.50) 3.1%No changeNo changeOn or before 12/31/

.

.

Stemware (crystalline) drinking glasses valued over $0.30 but not over $3 each, other than those presented in sets

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.12 Stemware (crystalline) drinking glasses valued over $0.30 but not over $3 each other than those presented in sets (provided for in subheading .28.20) 21.2% No changeNo changeOn or before 12/31/

.

.

Double-walled insulated glass tumblers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.13 Double-walled drinking glasses of specially tempered borosilicate glass, with or without handles (provided for in subheading .37.05) Free No changeNo changeOn or before 12/31/

.

.

Diamond-shaped stemmed wine glasses

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.14 Hexagonal, stemmed wine glasses, each with diamond-shaped base and made from specially toughened borosilicate glass (provided for in subheading .37.05) Free No changeNo changeOn or before 12/31/

.

.

Twisted-center stemless wine glass

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.15 Stemless wine glasses, each with twisted center indentation, of specially tempered borosilicate glass (provided for in subheading .37.05) Free No changeNo changeOn or before 12/31/

.

.

Crystalline drinking glasses, without stems, not in sets

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.16 Crystalline drinking glasses without stems, valued over $0.30 but not over $3 each, other than those presented in sets (provided for in subheading .37.20) 21.1% No changeNo changeOn or before 12/31/

.

.

Double-walled insulated glass bowls

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.17 Double-walled (insulated) bowls of specially tempered borosilicate glass, such bowls of a kind used for table or kitchen purposes (provided for in subheading .49.10) Free No changeNo changeOn or before 12/31/

.

.

Leaf-shaped glass decanters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.18 Leaf-shaped decanters of pressed and toughened (specially tempered) borosilicate glass (provided for in subheading .49.10) Free No changeNo changeOn or before 12/31/

.

.

Set of four appetizer plates made of glass with steel caddy holder, valued at $2 each

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.19 Set of four appetizer plates made of glass with steel caddy holder valued at $2 each (provided for in subheading .49.20) Free No changeNo changeOn or before 12/31/

.

.

Spice rack with glass jars and wooden lids valued not over $3 each

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.20 Spice racks, each presented with glass jars and wooden lids, valued not over $3 each (provided for in subheading .49.20) Free No changeNo changeOn or before 12/31/

.

.

Glass lens blanks for infrared applications

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.21 Glass lens blanks that are not optically worked, containing one or more of sulfur, selenium or tellurium, certified by the importer as suitable for infrared applications (CAS No. '50'4, '81'8, '84'2 or '36'2) (provided for in subheading .00.10) Free No changeNo changeOn or before 12/31/

.

.

Hair accessories of glass beads, imitation pearls, and imitation stones, valued less than $7

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.22 Hair accessories of glass beads, imitation pearls and imitation stones valued less than $7 (provided for in subheading .90.50) Free No changeNo changeOn or before 12/31/

.

.

Filter bags with acid-resistant coating, of woven fiberglass laminated to ePTFE, weighing at least 325 g/m2 but not over 350 g/m2

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.23 Filter bags with acid-resistant coating; such bags of woven fiberglass fabric laminated to an expanded polytetrafluoroethylene (ePTFE) membrane, coated with an acid-resistant on its backing, weighing at least 325 g/m2 but not over 350 g/m2; the foregoing with a burst strength of kPA (600 psi) or higher per ASTM D (provided for in subheading .90.10) Free No changeNo changeOn or before 12/31/

.

.

Fiberglass replacement wicks for outdoor garden torch

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.24 Replacement wicks exclusively of fiberglass for garden, patio and table top burning torches of subheading .50, the foregoing for outdoor use (provided for in subheading .90.10) Free No changeNo changeOn or before 12/31/

.

.

Filter bags of woven fiberglass fabric laminated to an ePTFE, with a polytetrafluoroethylene coated backing, not acid resistant, weighing at least 721 g/m2 but not over 771 g/m2

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.25 Filter bags of woven fiberglass fabric without an acid-resistant coating; laminated to an expanded polytetrafluoroethylene (ePTFE) membrane with a polytetrafluoroethylene coated backing, weighing at least 721 g/m2 but not over 771 g/m2; the foregoing with a burst strength of kPa (900 psi) or higher per ASTM D (provided for in subheading .90.10) Free No changeNo changeOn or before 12/31/

.

.

Silver catalyst

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.26 Silver exceeding 99.9 percent purity, in spherical shapes formed from silver anodes in an electrochemical process, such shapes with surface areas of 80 mm3 or greater (CAS No. '22'4) and ready for use as catalysts (provided for in subheading .91.50) Free No changeNo changeOn or before 12/31/

.

.

Silver round blanks

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.27 Silver round blanks (CAS No. '22'4), semimanufactured and weighing not more than 1,000 grams (provided for in subheading .92.50) Free No changeNo changeOn or before 12/31/

.

.

Ferroboron alloy

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.28 Ferroboron alloys in powders, lumps, granules or chunks (provided for in subheading .99.80) Free No changeNo changeOn or before 12/31/

.

.

Cast iron nonmalleable threaded main body combo castings for residential fuel oil tanks

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.29 Main body combo castings of nonmalleable cast iron designed for residential fuel oil tanks (provided for in subheading .11.00) Free No changeNo changeOn or before 12/31/

.

.

Cast iron nonmalleable threaded vent caps for residential fuel oil tanks

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.30 Threaded vent caps of nonmalleable cast iron designed for residential fuel oil tanks (provided for in subheading .11.00) Free No changeNo changeOn or before 12/31/

.

.

Cast iron nonmalleable threaded bushings for residential fuel oil tanks

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.31 Threaded bushings of nonmalleable cast iron to be installed to a residential fuel oil tank opening (provided for in subheading .11.00) Free No changeNo changeOn or before 12/31/

.

.

Cast iron nonmalleable threaded tank adapters for residential fuel oil tanks

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.32 Threaded tank adapters of nonmalleable cast iron designed for residential fuel oil tanks (provided for in subheading .11.00) Free No changeNo changeOn or before 12/31/

.

.

Cast iron nonmalleable threaded fill alarm main body for residential fuel oil tanks

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.33 Fittings of nonmalleable cast iron, each comprising the main body of a fill alarm designed for residential fuel oil tanks (provided for in subheading .11.00) Free No changeNo changeOn or before 12/31/

.

.

Cast iron nonmalleable threaded fill box caps for residential fuel oil tanks

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.34 Threaded fill box caps of nonmalleable cast iron designed for residential fuel oil tanks (provided for in subheading .11.00) Free No changeNo changeOn or before 12/31/

.

.

Cast iron nonmalleable threaded leg flanges for residential fuel oil tanks

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.35 Threaded leg flanges of nonmalleable cast iron designed for residential fuel oil tanks (provided for in subheading .11.00) Free No changeNo changeOn or before 12/31/

.

.

Portable gas cooking stoves

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.36 Portable propane gas camping stoves, each with one adjustable burner rated to generate up to 10,000 British thermal units (BTUs) of power, with casing of steel and pan support of steel covered with porcelain, the foregoing valued $4 or more but not over $20 each (provided for in subheading .11.10) Free No changeNo changeOn or before 12/31/

.

.

Portable outdoor cookers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.37 Portable outdoor cookers, fueled by natural gas or propane, put up in sets for retail sale (provided for in subheading .11.10) 1.2% No changeNo changeOn or before 12/31/

.

.

Self-anchored beverage containers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.38 Self anchoring beverage containers made of stainless steel with a base partially made of orange colored silicone material with said orange silicone base measuring no more than 60.325 mm (provided for in subheading .93.00) Free No changeNo changeOn or before 12/31/

.

.

Stainless steel handmade kitchen sinks

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.39 Handmade, top mounted, residential kitchen sinks of stainless steel, consisting of 1 or 2 bowls, 0.64 mm or more but not exceeding 1.2 mm in thickness, 13.97 cm or more but not exceeding 25.4 cm in depth, 43.18 cm or more but not exceeding 55.88 cm in width, and 68.58 cm or more but not exceeding 83.82 cm in length (provided for in subheading .10.00) Free No changeNo changeOn or before 12/31/

.

.

Loose frame baskets

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.40 Steel wire loose frame basket (provided for in subheading .20.00) Free No changeNo changeOn or before 12/31/

.

.

Two-story fire escape ladders

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.41 Fire escape ladders of iron or steel, measuring not over 4.3 m in length when fully extended, with a ladder load rating of 170 kg and designed to be hung from a windowsill measuring 15 cm or more but not over 33 cm in width; such ladders each having window brackets and rungs (stairs) of steel and webbing of nylon that connect the rungs to each other and to the window bracket; with slip resistant rungs and stabilizers, the foregoing designed for residential use and valued not over $28 each (provided for in subheading .90.86) Free No changeNo changeOn or before 12/31/

.

.

Three-story fire escape ladders

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.42 Fire escape ladders of iron or steel, measuring 4.4 m or more but not more than 7.4 m in length when fully extended, with a ladder load rating of 170 kg and designed to be hung from a windowsill measuring 15 cm or more but not over 33 cm in width; such ladders each composed of window brackets and rungs (stairs) of steel and webbing of nylon that connect the rungs to each other and to the window bracket; with slip resistant rungs and stabilizers, the foregoing designed for residential use and valued not over $47 each (provided for in subheading .90.86) Free No changeNo changeOn or before 12/31/

.

.

Work support stands of steel

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.43 Portable work support stands of steel, each with a hand-tightened clamp (provided for in subheading .90.86) Free No changeNo changeOn or before 12/31/

.

.

Locking fixtures of iron or steel

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.44 Locking fixtures of iron and steel, the foregoing designed to secure moving parts of lithography machine modules or apparatus, and parts thereof (provided for in subheading .90.86) Free No changeNo changeOn or before 12/31/

.

.

Stainless steel handle-and-stand accessories

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.45 Mobile handle-and-stand accessories of stainless steel, each comprising two circular slabs measuring 4 mm in thickness, with adhesive on one side of one circular slab, the slabs connected by an adjustable arm; valued not over $4.50 each (provided for in subheading .90.86) Free No changeNo changeOn or before 12/31/

.

.

Circular and S-shaped stainless steel carabiners

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.46 Carabiners or rings made of stainless steel, with a spring-loaded gate used to connect and secure non-load bearing components, valued no more than $10 (provided for in subheading .90.86) 1%No changeNo changeOn or before 12/31/

.

.

Pieces of refined unwrought copper cathode 99. percent pure

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.47 Pieces of copper cathode, refined and unrwought, 99. percent pure, measured by glow discharge mass spectrometry (GDMS) to have sulfur content not exceeding 150 parts per billion (ppb), aluminum content not exceeding 15 ppb and iron content not exceeding 15 ppb (provided for in subheading .11.00) Free No changeNo changeOn or before 12/31/

.

.

Ultra-thin and wide-width aluminum foil

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.48 Aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials), rolled but not further worked, such foil of a thickness (excluding any backing) of 6.35 microns and with a width between mm to mm, or of a thickness of 7 microns to 9 microns with a width between mm to mm (provided for in subheading .11.30) 1.9% No changeNo changeOn or before 12/31/

.

.

Etched capacitor aluminum foil of a thickness 0.018'0.126 mm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.49 Etched capacitor foil of aluminum, 0.018 mm or more but not over 0.126 mm in thickness, electrochemically oxidized (formed) and containing 99.8 percent or more by weight of aluminum, of a kind used for manufacturing electrolytic capacitors (provided for in subheading .19.10) Free No changeNo changeOn or before 12/31/

.

.

Stove top coffee makers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.50 Kitchen stove top coffee makers of aluminum, each with a capacity not exceeding 3 liters (provided for in subheading .10.71) Free No changeNo changeOn or before 12/31/

.

.

Aluminum shower caddies

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.51 Shower caddies made of aluminum wire with a dimension of 12 mm by 8 mm or less, designed to be hung over shower heads to hold bath accessories (provided for in subheading .20.00) Free No changeNo changeOn or before 12/31/

.

.

Step stools of aluminum

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.52 Step stools of aluminum, each having three steps, of a width of no less than 22 cm, with a folding safety bar and rubber non-slip feet (provided for in subheading .99.51) Free No changeNo changeOn or before 12/31/

.

.

Aluminum ladders

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.53 Articulated ladders of aluminum with a ladder load rating of 137 kg consisting of one or more pairs of locking joints and extendable sections, valued not over $100 (provided for in subheading .99.51) 1.5%No changeNo changeOn or before 12/31/

.

.

Circular and S-shaped aluminum carabiners

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.54 Carabiner or rings of aluminum, either single or double, each with a spring-loaded gate used to connect and secure non-load bearing components, valued no more than $3.25 (provided for in subheading .99.51) Free No changeNo changeOn or before 12/31/

.

.

Stationary sprinklers of zinc

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.55 Household irrigation sprinklers of zinc, designed to stay in one spot during use, with no moving irrigation arms and no adjustable watering patterns on the outside, of maximum dimension of 11 cm by 8.1 cm by 3.2 cm (provided for in subheading .00.10) Free No changeNo changeOn or before 12/31/

.

.

Tungsten waste and scrap

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.56 Tungsten (wolfram) waste and scrap (provided for in subheading .97.00) Free No changeNo changeOn or before 12/31/

.

.

Cobalt alloys

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.57 Cobalt alloys (provided for in subheading .20.30) 2.8%No changeNo changeOn or before 12/31/

.

.

Certain gallium (Ga)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.58 Gallium (CAS No. '55'3) (provided for in subheading .92.10), the foregoing other than goods described in heading .15.12 Free No changeNo changeOn or before 12/31/

.

.

Niobium (columbium) rings no thicker than 20 mm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.59 Rings of Niobium (columbium) (other than unwrought, waste and scrap and powders), measuring not over 20 mm in thickness (provided for in subheading .99.90) Free No changeNo changeOn or before 12/31/

.

.

Tungsten secondary raw material

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.60 Used cermets and articles thereof, including waste and scrap, the foregoing imported for the extraction of tungsten (provided for in heading .00.00) Free No changeNo changeOn or before 12/31/

.

.

Gear-driven bolt cutters and pipe cutters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.61 Pipe cutters and bolt cutters, each with a gear-driven mechanism (provided for in subheading .40.30) Free No changeNo changeOn or before 12/31/

.

.

Rotary cutters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.62 Rotary cutting hand tools, of iron or steel, designed to cut fabrics and craft materials, each with a replaceable circular blade and plastic handle with blade lock (provided for in subheading .51.30) Free No changeNo changeOn or before 12/31/

.

.

Food graters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.63 Food graters with blades or working surfaces of base metal, with nonworking parts of plastic, such graters not exceeding 31 cm in overall length (provided for in subheading .51.30) 0.8%No changeNo changeOn or before 12/31/

.

.

Hand tools for applying plastic clip fasteners to garments

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.64 Hand tools of plastics, designed for insertion and application of plastic clip fasteners, such hand tools each with an outer body and internal mechanism of plastics, containing a replaceable hollow steel needle with an outside diameter measuring less than 2.4 mm through which a fastener is fed and inserted into the intended target material (provided for in subheading .59.80) Free No changeNo changeOn or before 12/31/

.

.

Steel workstations with vises adjustable by foot pedal

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.65 Clamping workstations, each with steel vise, adjustable by foot pedal lever, weighing less than 20 kg, with a jaw width between 0 and 94 cm (provided for in subheading .70.00) Free No changeNo changeOn or before 12/31/

.

.

Fixed carbide cutter and roller cone drill bits

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.66 Rotary rock drill bits, and parts thereof, each such bit with cutting part containing by weight over 0.2 percent of chromium, molybdenum or tungsten or over 0.1 percent of vanadium (provided for in subheading .19.30), designed for use with rock drilling and earth boring tools of heading Free No changeNo changeOn or before 12/31/

.

.

Rotary food graters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.67 Rotary food graters, each incorporating blade drums of stainless steel and a suction base, operated by hand, weighing not more than 1.5 kg (provided for in heading .00.00) Free No changeNo changeOn or before 12/31/

.

.

Coffee presses

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.68 Coffee presses designed to brew ground coffee, each consisting of a glass cylinder, a plastic or metal handle or frame and a stainless steel mesh filter; the foregoing having a capacity of 0.5 liters or more but not over 1.5 liters (provided for in heading .00.00) 1.1% No changeNo changeOn or before 12/31/

.

.

Vacuum insulated coffee servers with a brew-through lid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.69 Vacuum insulated coffee servers with liners of steel, each with a capacity over 2 liters, having a brew-through lid, feet attached to the base and a hole at bottom of server for lever faucet attachment (provided for in heading .00.00) Free No changeNo changeOn or before 12/31/

.

.

Vacuum insulated coffee servers with no lid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.70 Vacuum insulated coffee servers with liners of steel, each with a capacity over 2 liters, presented with base with feet but no lid and with a hole at bottom of server for lever faucet attachment (provided for in heading .00.00) Free No changeNo changeOn or before 12/31/

.

.

Vacuum insulated coffee servers with fitted hinged lid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.71 Vacuum insulated coffee servers, each with outer layer and liner of steel, with a capacity over 2 liters, with tightly fitted hinged lid with a center hole designed to allow brewed beverages to pass directly into such server with top lever action for dispensing and steel base plate (provided for in heading .00.00) Free No changeNo changeOn or before 12/31/

.

.

Commercial vacuum insulated coffee servers with sight gauge

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.72 Commercial vacuum insulated coffee servers, each with outer layer and liner of steel, plastic base, a capacity over 2 liters, plastic carrying handle, bottom lever faucet, see-through contents window and a brew-thru lid (provided for in heading .00.00) Free No changeNo changeOn or before 12/31/

.

.

Commercial vacuum insulated coffee servers with plastic base

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.73 Commercial vacuum insulated coffee servers, each with outer layer and liner of steel, plastic base, capacity over 2 liters, plastic carrying handle, bottom lever faucet and brew-thru lid (provided for in heading .00.00) Free No changeNo changeOn or before 12/31/

.

.

Commercial vacuum insulated coffee servers with plastic base and stand

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.74 Commercial vacuum insulated coffee servers, each with outer layer and liner of steel, with plastic base and stand, with a capacity over 2 liters, with plastic carrying handle, with bottom lever faucet and brew-thru lid (provided for in heading .00.00) Free No changeNo changeOn or before 12/31/

.

.

Craft knives with fixed pen-like or retractable blades

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.75 Craft knives with fixed pen-like or retractable blade design, each with removable thin angled or scoop like blades of steel; such knives measuring between 152.4 mm and 228.6 mm in length and between 6.35 mm and 25.4 mm in diameter, valued between $0.50 and $2 each (provided for in subheading .93.00) Free No changeNo changeOn or before 12/31/

.

.

Craft knives

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.76 Craft knives, each with thermoplastic over mold grip, maximum handle dimensions measuring 135 mm in length, 26 mm in width and 17 mm in height (provided for in subheading .93.00); the foregoing other than craft knives with fixed pen-like or retractable blade design, with removable scoop like blades of steel Free No changeNo changeOn or before 12/31/

.

.

Blades for craft knives with non-fixed blades

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.77 Blades for craft knives, non-fixed, angled or scoop like shaped; such blades not over 58 mm in length (provided for in subheading .94.50) Free No changeNo changeOn or before 12/31/

.

.

Ergonomic pinking shears

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.78 Ergonomic pinking shears, valued over $30/dozen, with contoured plastic handles and with stainless steel blades, with the lower blade extending a minimum of 7 mm past the end of the upper blade (provided for in subheading .00.60) Free No changeNo changeOn or before 12/31/

.

.

Spring-action scissors

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.79 Scissors, each with a spring-action design that also features a slide lock and with only 1 loop handle, valued over $1.75/dozen (provided for in subheading .00.90), the foregoing other than goods described in heading .15.30 Free No changeNo changeOn or before 12/31/

.

.

Electronic locks for lockers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.80 Electronically actuated locks, of a kind used for locking furniture, each enclosed in metal housing and operated by a keypad or radio-frequency identification device (RFID), such goods each containing a key slot to operate the lock with an electronic key with a built-in power jumper (provided for in subheading .30.00) 1.6%No changeNo changeOn or before 12/31/

.

.

Luggage locks of base metal, packaged for retail sale

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.81 Luggage locks of base metal, packaged for retail sale, of a type compliant with standards of the Transportation Security Administration, such locks each keyed for opening with a universal master tool made and patented in the United States (provided for in subheading .40.30) Free No changeNo changeOn or before 12/31/

.

.

Key-operated door handles, push-pull-rotate

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.82 Door locks, locksets and other locks of base metal, key-operated, suitable for use with interior or exterior doors, but excluding garage, overhead or sliding doors; such locks capable of unlatching door knobs or levers by pushing, pulling or rotating (provided for in subheading .40.60) Free No changeNo changeOn or before 12/31/

.

.

Vent mounted magnetic mobile holder for automobiles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.83 Hands-free cell mounts of base metal, suitable for mounting cell phones to the air vents of motor vehicles, each with a 25 mm diameter polished steel ball securely mounted on an aluminum die cast base containing a two-prong lever-release clip and a ring-shaped magnet socket filled with a silicone pad (provided for in subheading .30.30) 1.3% No changeNo changeOn or before 12/31/

.

.

Dash mounted magnetic mobile holder for automobiles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.84 Hands-free cell mounts of base metal, suitable for mounting cell phones to the dashboard of motor vehicles, each with of a 25 mm diameter polished steel ball securely mounted on a machined aluminum base with adhesive material and a ring-shaped magnet socket filled with a silicone pad (provided for in subheading .30.30) 0.9% No changeNo changeOn or before 12/31/

.

.

Windshield mounted magnetic mobile holder for automobiles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.85 Hands-free cell mounts of base metal, suitable for mounting cell phones to the windshield of motor vehicles, each with a 25 mm diameter polished steel ball securely mounted on a stamped and formed aluminum arm with a 72 mm diameter suction device and a ring-shaped magnet socket filled with a silicone pad (provided for in subheading .30.30) Free No changeNo changeOn or before 12/31/

.

.

Steel latches with plastic plungers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.86 Steel latches, each measuring 5 cm in length and designed to secure the steps of a recreational vehicle in a locked position, such latches each containing a plunger of plastic measuring 1.7 cm by 1.5 cm and a compression spring (provided for in subheading .30.30) Free No changeNo changeOn or before 12/31/

.

.

Non-key-operated door handles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.87 Non-key-operated door handle assemblies, of base metal, suitable for use with interior or exterior doors, excluding garage, overhead or sliding doors; the foregoing with handles capable of opening a door by pushing, pulling or rotating (provided for in subheading .41.60) Free No changeNo changeOn or before 12/31/

.

.

Curtain rings

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.88 Curtain or drapery rings of base metal, specially designed for use with curtain or drapery rods, presented in sets of 10 rings (provided for in subheading .41.60) 2.2% No changeNo changeOn or before 12/31/

.

.

Brackets

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.89 Brackets of iron or steel, of aluminum or of zinc, such brackets specially designed for use with curtain or drapery rods (provided for in subheading .41.60) 2.5%No changeNo changeOn or before 12/31/

.

.

Curtain rods

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.90 Telescoping curtain rods of base metal, whether or not presented with mounting hardware (provided for in subheading .41.60) 1.8%No changeNo changeOn or before 12/31/

.

.

Curtain rod hardware

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.91 Endcaps of base metal, specially designed for use with curtain or drapery rods (provided for in subheading .41.60) Free No changeNo changeOn or before 12/31/

.

.

Curtain tiebacks

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.92 Tiebacks of base metal, specially designed for use with curtains or drapes (provided for in subheading .41.60) Free No changeNo changeOn or before 12/31/

.

.

Curtain rod finials

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.93Finials of base metal, specially designed for use with curtain or drapery rods (provided for in subheading .41.60) Free No changeNo changeOn or before 12/31/

.

.

Curved shower rods

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.94 Curved shower rods of stainless steel and aluminum, each capable of being installed by tension or by mounting with wall brackets (provided for in subheading .41.60) 0.8%No changeNo changeOn or before 12/31/

.

.

Shower hooks and rings

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.95 Shower curtain hooks or rings, the foregoing of aluminum, of iron or steel or of zinc (provided for in subheading .41.60) Free No changeNo changeOn or before 12/31/

.

.

Straight shower rods

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.96Straight shower rods, of aluminum or stainless steel, either designed to be mounted by means of tension or incorporating a dual mount permitting the mounting by either tension or by use of a bracket (provided for in subheading .41.60)1.1%No changeNo changeOn or before 12/31/

.

.

Steel window rods

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.97Tension or screw-mount curtain or drapery rods, made of closed tubing of steel (provided for in subheading .41.60); the foregoing other than telescoping curtain rods of base metalFreeNo changeNo changeOn or before 12/31/

.

.

Antitheft steel cases with digital locks

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.98Reinforced safes of welded steel, each weighing 11.8 kg or less, valued $19 or more but not over $38, with digital lock (provided for in heading .00.00)FreeNo changeNo changeOn or before 12/31/

.

.

Stainless steel hose kits

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.29.99Mechanical kits each containing flexible hoses of base metal with fittings, clamps, manifolds and other hardware designed for use with machines and apparatus of subheading .20.00 (provided for in subheading .10.30)FreeNo changeNo changeOn or before 12/31/

.

.

Stainless steel hoses

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.01Flexible stainless steel hoses with fittings, designed for used with machines and apparatus of subheading .20.00 (provided for in subheading .10.30); the foregoing not presented in kits containing goods described in other subheadingsFreeNo changeNo changeOn or before 12/31/

.

.

Wrist watch strap buckles not over 18 mm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.02Buckles of stainless steel, of a kind used for wrist watch straps measuring not over 18 mm (provided for in subheading .90.60)FreeNo changeNo changeOn or before 12/31/

.

.

Wrist watch strap buckles over 18 mm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.03Buckles of stainless steel, of a kind used for wrist watch straps measuring over 18 mm (provided for in subheading .90.60)FreeNo changeNo changeOn or before 12/31/

.

.

Used cylinder heads

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.04Used cast-iron cylinder heads designed for use in spark-ignition internal combustion piston engines (provided for in subheading .91.99)0.8%No changeNo changeOn or before 12/31/

.

.

Cylinder heads used solely or principally with certain engines

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.05Cast-iron cylinder heads for use solely or principally with engines of heading , such engines designed to be installed in vehicles classifiable in subheading .20 or .23 and with bore greater than 126 mm (provided for in subheading .99.91) Free No changeNo changeOn or before 12/31/

.

.

Engine blocks

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.06Engine blocks, each weighing over 272 kg but not over 317 kg, for compression-ignition internal combustion piston engines (diesel or semi-diesel engines), such engines each having a cylinder capacity of approximately 12.4 liters and for vehicles of subheading .20 or .23 (provided for in subheading .99.91) Free No changeNo changeOn or before 12/31/

.

.

Swirler assemblies for turbines

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.07Swirler assemblies, designed to be used in non-aircraft gas turbines (provided for in subheading .99.90) Free No changeNo changeOn or before 12/31/

.

.

Barrels for fuel mixing

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.08 Barrels of nickel alloy, for fuel mixing within non-aircraft gas turbines of heading (provided for in subheading .99.90) Free No changeNo changeOn or before 12/31/

.

.

Injector assemblies for certain turbines

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.09 Injector assemblies of fuel injection components, designed to deliver fuel in the combustion system for use in non-aircraft gas turbines of heading (provided for in subheading .99.90) Free No changeNo changeOn or before 12/31/

.

.

Stem assemblies for certain turbines

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.10 Fuel tube air-swirlers forming stem assemblies of nickel alloys and stainless steel for use in non-aircraft gas turbines of heading (provided for in subheading .99.90) Free No changeNo changeOn or before 12/31/

.

.

Tip assemblies for non-gas turbines

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.11 Tip assemblies of nickel alloy, for use in non-aircraft gas turbines of heading (provided for in subheading .99.90) Free No changeNo changeOn or before 12/31/

.

.

High pressure fuel pumps

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.12 High pressure fuel pumps, each incorporating a dual layered damper enclosed with a multi-step stamped cover to aid in stabilizing pressure, certified by the importer to be used in regulating the fuel supply into the fuel rail, designed for use in gasoline direct injection (GDI) spark-ignition internal combustion piston engines (provided for in subheading .30.90); the foregoing other than used goods 1.3% No changeNo changeOn or before 12/31/

.

.

Dry scroll vacuum pumps 364x333x485 mm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.13 Dry scroll vacuum pumps, measuring approximately 364 mm in height, 333 mm in width and 485 mm in length, valued over $1,000 each (provided for in subheading .10.00) Free No changeNo changeOn or before 12/31/

.

.

Dry scroll vacuum pumps 297x260x420 mm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.14 Dry scroll vacuum pumps, measuring approximately 297 mm in height, 260 mm in width and 420 mm in length, valued over $1,000 each (provided for in subheading .10.00) Free No changeNo changeOn or before 12/31/

.

.

Dry scroll vacuum pumps 254x260x420 mm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.15 Dry scroll vacuum pumps, each measuring approximately 254 mm in height, 260 mm in width and 420 mm in length and valued over $1,000 (provided for in subheading .10.00) Free No changeNo changeOn or before 12/31/

.

.

Dry scroll vacuum pumps 181x140x358 mm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.16 Dry scroll vacuum pumps, each measuring approximately 181 mm in height, 140 mm in width and 358 mm in length and valued over $1,000 (provided for in subheading .10.00) Free No changeNo changeOn or before 12/31/

.

.

Turbomolecular vacuum pumps

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.17 Turbomolecular vacuum pumps, valued over $1,000 each (provided for in subheading .10.00) 0.2% No changeNo changeOn or before 12/31/

.

.

Rotary vane vacuum pumps valued over $500 each

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.18 Rotary vane vacuum pumps, incorporating vanes mounted to a rotor inside a cavity, such pumps valued over $500 each (provided for in subheading .10.00) Free No changeNo changeOn or before 12/31/

.

.

Vacuum diffusion pumps valued over $900 each

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.19 Vacuum diffusion pumps, using a high speed jet of vapor to direct gas molecules, valued over $900 each (provided for in subheading .10.00) Free No changeNo changeOn or before 12/31/

.

.

Hand- or foot-operated air pumps

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.20 Hand- or foot-operated air pumps (provided for in subheading .20.00) 2.8%No changeNo changeOn or before 12/31/

.

.

Roof vent fans

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.21 Ventilation fans, designed for permanent installation on the rooftop of recreational and specialty vehicles, each consisting of an electric D/C motor with an output wattage over 9 W but not exceeding 28 W, a plastic fan blade of a diameter between 15.24 cm and 30.48 cm and a base plate (provided for in subheading .51.30) 2.8%No changeNo changeOn or before 12/31/

.

.

12-Amp corded electric leaf blowers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.22 Electric centrifugal blowers, of a kind used solely or principally for blowing leaves, each with a self-contained AC electric motor not exceeding 12 A and an output not exceeding 1.45 kW (provided for in subheading .59.65) Free No changeNo changeOn or before 12/31/

.

.

Cordless battery powered leaf blowers not exceeding 20 volts

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.23 Centrifugal blowers of a kind used solely or principally for blowing leaves, each powered by a self-contained DC lithium-ion battery not exceeding 20 V and an output not exceeding 0.04 kW (provided for in subheading .59.65) Free No changeNo changeOn or before 12/31/

.

.

Cordless battery powered leaf blowers between 20 and 60 V

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.24 Centrifugal blowers of a kind used solely or principally for blowing leaves, each powered by a self-contained DC lithium-ion battery greater than 20 V but not exceeding 60 V, and of an output greater than 0.04 kW but not exceeding 0.12 kW (provided for in subheading .59.65) Free No changeNo changeOn or before 12/31/

.

.

Fan assemblies for cab climate systems

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.25 Centrifugal fans designed to be used in cab climate systems, for heating, cooling or air circulation units in machinery or vehicles of headings , or (provided for in subheading .59.65) Free No changeNo changeOn or before 12/31/

.

.

Aquarium air pumps

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.26 Air pumps designed for use in aquarium tanks having a volume of 3.78 liters or more but not over 1,135.7 liters, such pumps with housings of plastics and feet of rubber, powered by 120 V AC (provided for in subheading .80.90) Free No changeNo changeOn or before 12/31/

.

.

Heat pumps for residential use

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.27 Heat pumps designed for residential use, each with copper piping, an aluminum plate-fin heat exchanger, a rotary inverter compressor and a fan covered with galvanized steel sheets, such pumps measuring between 555 mm and 702 mm in height, between 770 mm and 845 mm in width and between 300 mm and 363 mm in depth (provided for in subheading .90.80) Free No changeNo changeOn or before 12/31/

.

.

Heat pumps (outdoor units) for split air conditioner systems

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.28 Heat pumps (outdoor units) designed for use with split air conditioner systems for residential use, such units consisting of copper piping, an aluminum plate-fin heat exchanger, a rotary inverter compressor and a fan, all of which is covered with galvanized steel sheets to form units measuring between 703 mm and 810 mm in height, between 845 mm and 946 mm in width and between 335 mm and 386 mm in depth (provided for in subheading .90.80) Free No changeNo changeOn or before 12/31/

.

.

High-wall indoor units

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.29 Heat pumps designed for residential use, consisting of a fan coil, electrical circuit boards, electrical components and motors, covered in a molded plastic casing, such heat pumps measuring between 280 mm and 343 mm in height, between 835 mm and 1,186 mm in width and between 198 mm and 258 mm in depth (provided for in subheading .90.80) Free No changeNo changeOn or before 12/31/

.

.

Single-zone outdoor units

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.30 Heat pumps designed for residential use, each consisting of a rotary compressor, a fan coil and aluminum plate-fin heat exchanger, covered in galvanized steel, such heat pumps measuring between 300 mm and 322 mm in depth, 770 mm in width and 555 mm in height (provided for in subheading .90.80) Free No changeNo changeOn or before 12/31/

.

.

Mini heat pumps for split air conditioner systems

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.31 Heat pumps (outdoor units) designed for use with split air conditioner systems for residential use, such units each consisting of copper piping, aluminum plate-fin heat exchanger, a rotary inverter compressor and a pair of fans, all of which is covered with galvanized steel sheets to form units measuring 1,327.15 mm in height, 901.7 mm in width and 400 mm in depth (provided for in subheading .90.80) Free No changeNo changeOn or before 12/31/

.

.

Multi-zone outdoor unit ductless systems

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.32 Heat pumps designed for residential use, each consisting of copper piping, aluminum plate-fin heat exchanger, a rotary inverter compressor, a pair of fans and covered in galvanized steel sheets, such heat pumps measuring 1,333 mm in height, 1,045 mm in width and 380 mm in depth (provided for in subheading .90.80) Free No changeNo changeOn or before 12/31/

.

.

Indoor units of split air conditioner systems

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.33 Indoor units of split air conditioner systems, designed for use with ducted systems, consisting of motors, pumps and fans covered in steel casing, such units measuring approximately 1,400 mm in width, 447 mm in height and 898 mm in depth (provided for in subheading .90.80) Free No changeNo changeOn or before 12/31/

.

.

Ductless BTU heat pumps, single zone inverter

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.34 Heat pumps designed for residential use with ductless air conditioning machines, each with a motor, a fan, brazed tubes and aluminum plate-fin heat exchanger and covered in sheet metal, such heat pumps measuring between approximately 551.2 mm and 1,341.12 mm in height, between 779.8 mm and 899.2 mm in width and between 289.6 mm and 680.7 mm in depth (provided for in subheading .90.80) Free No changeNo changeOn or before 12/31/

.

.

Single-phase heat pump

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.35 Heat pumps designed for residential use with both ducted and ductless systems, each with two fans, finned tube and hermetic rotary compressor and covered in galvanized steel, measuring 154.9 cm in height, 101.1 cm in width and 37.1 cm in depth (provided for in subheading .90.80) Free No changeNo changeOn or before 12/31/

.

.

Steel vacuum pitchers with plastic hinged lid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.36 Vacuum insulated thermal pitchers, each with stainless steel interior and exterior, with a capacity exceeding 1 liter but not exceeding 2 liters, measuring approximately 27.9 cm or more but not over 30.5 cm in height, with plastic brew-through lid for direct brewing and plastic spout and handle for pouring, used and marketed for commercial coffee brewers of subheading .81 (provided for in subheading .90.95) Free No changeNo changeOn or before 12/31/

.

.

Oil filters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.37 Oil filters for use solely or principally with diesel engines, such engines producing 63 kW of power (provided for in subheading .23.00) Free No changeNo changeOn or before 12/31/

.

.

Battery powered nasal irrigators

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.38 Battery-operated personal nasal irrigators (provided for in subheading .89.90) Free No changeNo changeOn or before 12/31/

.

.

Struts to absorb vibration

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.39 Spring struts designed to absorb vibration in household- or laundry-type washing machines, such struts each measuring in overall length 350 mm or more but not over 380 mm and in diameter approximately 35 mm or more but not over 40 mm, with 8 mm threads at each end (provided for in subheading .90.60) Free No changeNo changeOn or before 12/31/

.

.

Table saws (25.4 cm.), operable corded and cordless

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.40 Brushless table saws for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, each capable of being powered by either a 36 V DC lithium-ion battery or by AC power, with blade measuring 25.4 cm (provided for in subheading .91.00), the foregoing other than goods described in any other heading of this subchapter Free No changeNo changeOn or before 12/31/

.

.

Sliding miter saws (25.4 cm) with laser, corded and cordless

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.41 Brushless miter sawing machines, each capable of being powered by either a 36 V DC lithium-ion battery or by AC power, not numerically controlled, for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, with 25.4 cm blade, capable of adjusting bevel of cut, with laser guides and slide rail (provided for in subheading .91.00) Free No changeNo changeOn or before 12/31/

.

.

Electromechanical rotary hammers, corded and cordless

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.42 Rotary hammer tools, of a kind for working in the hand, each with self-contained brushless electromechanical motor, such tools capable of performing drilling and chiseling and of being powered both by a 36 V DC lithium-ion battery and by AC power, with a minimum speed of 260 RPM and a maximum speed of 590 RPM (provided for in subheading .21.00) 0.9% No changeNo changeOn or before 12/31/

.

.

Electromechanical hammer impact drivers, corded and cordless

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.43 Hand-held brushless electromechanical impact drivers, designed to drive screws at varying speeds, each capable of being powered by a 36 V DC lithium-ion battery or by AC power as required by the user (provided for in subheading .21.00) Free No changeNo changeOn or before 12/31/

.

.

Rotary hammer drill tools with self-contained electric motor

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.44 Rotary drill and hammer tools with self-contained electric motor, each with pneumatic hammering mechanism designed to engage with carbide drill bits and an electromechanical mechanism that separates the drive from the internal gearings, each with rated amperage that does not exceed 9 A, and with triaxial vibration values, measured in accordance with European Norm , that does not exceed 17 m/s2 (provided for in subheading .21.00) 0.5% No changeNo changeOn or before 12/31/

.

.

Drill driver tools with self-contained electric motor

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.45 Drill driver tools with self-contained electric motor, each encased in a rubberized glass-fiber reinforced casing that engages a smooth or slotted shank drill-bit, powered by 10.8 V, 21.6 V or 120 V, with rated amperage that does not exceed 12 A, and with triaxial vibration values, measured in accordance with European Norm , that does not exceed 3.5 m/s2 (provided for in subheading .21.00) Free No changeNo changeOn or before 12/31/

.

.

Extruders

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.46 Extruders, designed for processing thermoplastics, with a screw size of 6.4 cm or greater (provided for in subheading .20.00) 2.2% No changeNo changeOn or before 12/31/

.

.

Three-dimensional drawing pens

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.47 Three-dimensional (3D) drawing devices, each with an exterior on/off switch, dual control buttons to activate the device's motor or control speed of extruding filament, removable metal nozzle and removable maintenance panel, such drawing devices measuring between 10 mm and 50 mm in length and between 5 mm and 20 mm in width (provided for in subheading .80.00) Free No changeNo changeOn or before 12/31/

.

.

Professional grade three-dimensional drawing pens

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.48 Three-dimensional (3D) drawing devices, each with dual control buttons to activate the device's motor or control the direction of the extruding filament, an exterior liquid crystal display (LCD), a magnetically affixed removable panel and removable metal nozzle, such drawing devices measuring between 5 cm and 15 cm in length and between 1 cm and 3 cm in width (provided for in subheading .80.00) Free No changeNo changeOn or before 12/31/

.

.

Electric multi-functional blower vacuums

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.49 Electromechanical appliances capable of blowing, vacuuming and mulching, each with a self-contained AC electric motor not exceeding 12 A and an output not exceeding 1.45 kW (provided for in subheading .89.65) Free No changeNo changeOn or before 12/31/

.

.

Autosamplers (multisamplers) for liquid chromatographs

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.50 Autosamplers ('multisamplers') for liquid chromatographs, such autosamplers capable of lifting and handling both microliter plates and vials and each measuring approximately 320 mm in height, 468 mm in depth and 396 mm in width (provided for in subheading .89.94) 0.2% No changeNo changeOn or before 12/31/

.

.

Autosamplers (vialsamplers) for liquid chromatographs

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.51 Autosamplers ('vialsamplers') for liquid chromatographs, such autosamplers capable of lifting and handling only vials and measuring approximately 320 mm in height, 468 mm in depth and 396 mm in width (provided for in subheading .89.94) 0.5% No changeNo changeOn or before 12/31/

.

.

Hydraulic hammer assembly

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.52 Hydraulic hammers designed for use on backhoes, shovels, clamshells or draglines and suitable for use in demolishing concrete or asphalt (provided for in subheading .89.94) 2.2% No changeNo changeOn or before 12/31/

.

.

Segmented bladder-operated molds, with more than 25-inch rim diameter

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.53 Segmented bladder-operated molds, designed to be used for molding/forming and curing 'green tires' with a rim diameter measuring over 63.5 cm (provided for in subheading .79.90), such tires for off-the-road use Free No changeNo changeOn or before 12/31/

.

.

Used valves for directional control

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.54 Used hydraulic directional control valves (provided for in subheading .20.00) Free No changeNo changeOn or before 12/31/

.

.

Keg spears with pressure release valves

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.55 Keg spears, each with automatic (not hand operated) relief valve designed to release pressure at approximately 30 bar (provided for in subheading .40.00) Free No changeNo changeOn or before 12/31/

.

.

Multiport distribution controllers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.56 Solenoid actuated valves equipped with multiple apparatus (up to two sub multi-port distribution controllers) for electrical control and 6, 8, 10 or 16 ports for variable refrigerant flow all of which is covered in a galvanized steel plate box with white powder coating, such valves measuring 323.85 mm in height and between 939.8 mm and 1,181.1 mm in width (provided for in subheading .80.90) Free No changeNo changeOn or before 12/31/

.

.

Subsea modular trees

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.57 Subsea trees, each comprising an assembly of valves, capable of regulating and containing the hydrocarbon flow from a well, such trees also capable of preventing the release of hydrocarbons from a well into the environment (provided for in subheading .80.90) 1.5% No changeNo changeOn or before 12/31/

.

.

Flow selector unit-multi-port 6-branch engine crankshafts

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.58 Solenoid actuated control valves consisting of brazed copper pipes and galvanized steel plates, each designed for use with residential heat pumps and fan coils and measuring 215.9 mm in height, 1,056.64 mm in width and 568.96 mm in length (provided for in subheading .80.90) Free No changeNo changeOn or before 12/31/

.

.

Engine crankshafts

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.59 Engine crankshafts used in engines under headings or , such crankshafts weighing between 275 kg and 650 kg, or between 100 kg and 130 kg (provided for in subheading .10.30), the foregoing other than goods described in heading .15.96 1.5% No changeNo changeOn or before 12/31/

.

.

Turbocharger journal bearings

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.60 Journal bearings, each designed to support and permit free rotation of a rotor within a turbocharger (provided for in subheading .30.80) Free No changeNo changeOn or before 12/31/

.

.

Mid-range bearing housings

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.61 Mid-range bearing housings, shell cast and sand molded, of gray cast iron, machine finished and designed for compression-ignition internal combustion diesel engines with cylinder capacities of 5.9 liters or more but not exceeding 10 liters, each bearing housing with an overall length between 55 mm and 135 mm and weighing at least 6 kg but not over 25 kg (provided for in subheading .30.80) Free No changeNo changeOn or before 12/31/

.

.

Heavy duty bearing housings

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.62 Heavy duty bearing housings, shell cast and sand molded of gray cast iron, machine finished, designed for compression-ignition internal combustion diesel engines, such engines with cylinder capacity of 10 liters or more but not exceeding 16 liters, each bearing housing with an overall length between 55 mm and 135 mm and weighing 6 kg or more but not exceeding 25 kg (provided for in subheading .30.80) Free No changeNo changeOn or before 12/31/

.

.

Fixed ration gear boxes

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.63 Fixed ratio gearboxes designed for use with generating sets of heading (provided for in subheading .40.50) 2.4% No changeNo changeOn or before 12/31/

.

.

Track drive gear boxes

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.64 Track drive gear boxes, designed for use in machinery of heading or (provided for in subheading .40.50) 1.5% No changeNo changeOn or before 12/31/

.

.

Swing bearing assembly

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.65 Geared swing bearing assemblies, of a kind used to rotate the cab of machinery described in subheading .52.10 (provided for in subheading .90.50) 1.5% No changeNo changeOn or before 12/31/

.

.

Gears for use in machinery or within engines

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.66 Transmission timing gears or gear drive gears, the foregoing of alloy steel and designed to be used in machinery or within an engine, such gears each weighing between 1.885 kg and 500 kg, measuring between 30 mm and 505 mm in diameter and between 15 mm and 285 mm in width (provided for in subheading .90.50) Free No changeNo changeOn or before 12/31/

.

.

14Y stepper motors

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.67 Electric DC stepper motors of an output under 18.65 W, measuring between 20 mm and 39 mm in length (provided for in subheading .10.40) Free No changeNo changeOn or before 12/31/

.

.

Air door actuators

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.68 Air door actuator DC motor of an output under 18.65 W for heating, ventilating and air conditioning (HVAC) climate-control systems (provided for in subheading .10.40) 2.1% No changeNo changeOn or before 12/31/

.

.

Servo motors

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.69 Ferrite type DC electric motors, of a kind used to control air temperature in permanently installed heating, ventilation and air conditioning systems in the automotive industry, each motor with an operating voltage ranging between 8 V and 14.5 V (amp side voltage ranging between 10 V and 16 V), ring varistor, brush and D cut output shaft (provided for in subheading .10.40) Free No changeNo changeOn or before 12/31/

.

.

DC brushed rhombic winding NdFeb magnet motors, with output under 18.65 W

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.70 Electric DC, brushed, ironless core motors with rhombic winding and NdFeB magnets, each motor with an output under 18.65 W and a diameter exceeding 8 mm but not exceeding 15 mm (provided for in subheading .10.40) Free No changeNo changeOn or before 12/31/

.

.

DC brushed rhombic winding NdFeB magnet motors

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.71 Electric DC, brushed, ironless core motors with rhombic winding and NdFeB magnets, each motor with an output under 18.65 W and a diameter exceeding 15 mm (provided for in subheading .10.40) 0.4% No changeNo changeOn or before 12/31/

.

.

DC brushed rhombic winding AlNiCo magnet motors, with output under 18.65 W

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.72 Electric DC, brushed ironless core motors with rhombic winding and AlNiCo magnets, each motor with an output under 18.65 W (provided for in subheading .10.40) 0.2% No changeNo changeOn or before 12/31/

.

.

DC brushless rhombic winding NdFeB magnet motors, with output under 18.65 W

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.73 Electric DC, brushless slotless motors with rhombic winding and NdFeB magnets, each motor with an output under 18.65 W and a diameter exceeding 8 mm (provided for in subheading .10.40) Free No changeNo changeOn or before 12/31/

.

.

DC brushed rhombic winding NdFeB magnet motors, with output over 18.65 but not over 37.5 W

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.74 Electric DC, brushed, ironless core motors with rhombic winding and NdFeB magnets, each motor with an output of 18.65 W or more but not exceeding 37.5 W (provided for in subheading .10.60) Free No changeNo changeOn or before 12/31/

.

.

DC brushed rhombic winding AlNiCo magnet motors, with output over 18.65 W but not over 37.5 W

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.75 Electric DC, brushed ironless core motors with rhombic winding and AlNiCo magnets, each motor with an output of 18.65 W or more but not exceeding 37.5 W (provided for in subheading .10.60) Free No changeNo changeOn or before 12/31/

.

.

DC brushless slotless rhombic winding NdFeB magnet motors output over 18.65 W but not over 37.5 W

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.76 Electric DC, brushless slotless motors consisting of rhombic winding and NdFeB magnets, each with an output of 18.65 W or more but not exceeding 37.5 W (provided for in subheading .10.60) Free No changeNo changeOn or before 12/31/

.

.

DC brushed rhombic winding NdFeB magnet motors output over 37.5 W but not over 74.6 W

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.77 Electric DC, brushed ironless core motors with rhombic winding and NdFeB magnets, each motor with an output exceeding 37.5 W but not exceeding 74.6 W (provided for in subheading .31.20) Free No changeNo changeOn or before 12/31/

.

.

DC brushless slotless rhombic winding NdFeB magnet motors output over 37.5 W but not over 74.6 W

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.78 Electric DC, brushless slotless motors with rhombic winding and NdFeB magnets, each motor with an output exceeding 37.5 W but not exceeding 74.6 W (provided for in subheading .31.20) Free No changeNo changeOn or before 12/31/

.

.

Motors

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.79 Electric DC motors, of an output exceeding 37.5 W but not exceeding 74.6 W (provided for in subheading .31.20); the foregoing excluding brushed ironless core motors or brushless slotless motors containing rhombic winding and NdFeB magnets 2.6% No changeNo changeOn or before 12/31/

.

.

DC motors of an output exceeding 74.6 W but not exceeding 735 W

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.80 DC motors of an output exceeding 74.6 W but not exceeding 735 W, weighing 2.6 kg, measuring 155 mm in length, each equipped with an electronic power steering control module with an exterior surface of carbon steel coated on both sides with an aluminum-silicon alloy; where the three phase neutral point is external to the motor and located within the control module as certified by the importer (provided for in subheading .31.40) 2.5% No changeNo changeOn or before 12/31/

.

.

DC motors, of an output exceeding 74.6 W but not exceeding 735 W

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.81 DC motors, of an output exceeding 74.6 W but not exceeding 735 W, each valued not over $18 (provided for in subheading .31.40); the foregoing excluding products described in heading .16.07 and DC motors with rhombic winding and NdFeB magnets 3.3% No changeNo changeOn or before 12/31/

.

.

DC brushed rhombic winding NdFeB magnet motors output over 74.6 W but not over 735 W

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.82 Electric DC, brushed ironless core motors with rhombic winding and NdFeB magnets, each motor with an output exceeding 74.6 W but not exceeding 735 W (provided for in subheading .31.40); the foregoing excluding products described in heading .16.07 Free No changeNo changeOn or before 12/31/

.

.

DC brushless slotless rhombic winding NdFeB magnet motors output over 74.6 W but not over 735 W

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.83 Electric DC, brushless slotless motors containing rhombic winding and NdFeB magnets, each motor of an output exceeding 74.6 W but not exceeding 735 W (provided for in subheading .31.40); the foregoing excluding products described in heading .16.07 Free No changeNo changeOn or before 12/31/

.

.

DC motors of an output exceeding 750 W but not exceeding 14.92 kW

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.84 DC motors of an output exceeding 750 W but not exceeding 14.92 kW, each weighing 3.04 kg or more but not over 3.37 kg, each measuring 187 mm or more in length but not over 198 mm, each equipped with an electronic power steering control module with an exterior surface of carbon steel coated on both sides with an aluminum-silicon alloy, in which the three phase neutral point is external to the motor and located within the control module as certified by the importer (provided for in subheading .32.20) 2.1% No changeNo changeOn or before 12/31/

.

.

DC electric motor for non-aircraft gas turbines

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.85 Electric DC motors of an output exceeding 750 W but not exceeding 14.92 kW, such motors used in non-aircraft gas turbines (provided for in subheading .32.20) Free No changeNo changeOn or before 12/31/

.

.

AC alternators

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.86 AC alternators with copper windings for diesel engines, gas engines or turbines, each weighing approximately between 57 kg and 250 kg, and rated from 1 kVA to 75 kVA (provided for in subheading .61.00) Free No changeNo changeOn or before 12/31/

.

.

AC alternators with copper windings

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.87 AC alternators with copper windings for diesel engines, gas engines or turbines rated from 75 kVA to 375 kVA (provided for in subheading .62.00) 1.8%No changeNo changeOn or before 12/31/

.

.

Wound stators and rotor assemblies

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.88 Stators and rotors for the goods of heading , for motors over 18.65 W, such motors being used in oilfield electrical submersible pumps (ESPs) (provided for in subheading .00.65)FreeNo changeNo changeOn or before 12/31/

.

.

Rotors

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.89 Rotors suitable for motors of heading exceeding 18.65 W but not over 735 W (provided for in subheading .00.65)FreeNo changeNo changeOn or before 12/31/

.

.

Stators for washing machines, with a 27-tooth design

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.90 Stators for brushless permanent magnet alternating current three-phase motors exceeding 18.65 W but not exceeding 735 W, with a 27 tooth design, each having a variable speed range of zero to 1,200 revolutions per minute and having the capability of producing starting torque up to 5.7 kg-m; the foregoing stators for use in laundry appliances and each having a helical wrapped lamination, overmolded resin construction, a 4.2 to one tooth length/width ratio, and having the capability of 68 A-weighted decibel sound levels, each stator having a diameter of 260.6 mm and a maximum height of 58 mm (provided for in subheading .00.65)FreeNo changeNo changeOn or before 12/31/

.

.

Stators for washing machines, with an 18-tooth design

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.91 Stators for brushless permanent magnet alternating current three-phase motors exceeding 18.65 W but not over 735 W, with an 18 tooth design, each having a variable speed range of zero to 900 revolutions per minute and having the capability of producing starting torque of up to 1.1 kg-m, the foregoing stators each having a nested helical wrapped lamination, an overmolded resin construction, and the capability of 60 A-weighted decibel sound levels, and having a diameter of 208 mm and a height of 45 mm (provided for in subheading .00.65)FreeNo changeNo changeOn or before 12/31/

.

.

Rotors for washing machines, with a height of 60.8 mm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.92 Rotors for brushless permanent magnet alternating current three-phase motors exceeding 18.65 W but not over 735 W, each with 24 poles and a variable speed range of zero to 1,200 revolutions per minute and having the capability of producing starting torque of up to 5.7 kg-m, the foregoing rotors designed for use in a laundry appliance, with an overmolded resin construction and 20 percent contour discreet magnets capable of 68 A-weighted decibel sound levels, with a diameter of 296 mm and a height 60.8 mm (provided for in subheading .00.65)FreeNo changeNo changeOn or before 12/31/

.

.

Rotors for washing machines, with a height of 49 mm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.93 Rotors for brushless permanent magnet AC 3-phase motors exceeding 18.65 W but not over 735 W, with 24 poles, a variable speed range of zero to 900 revolutions per minute, producing starting torque of up to 1.1 kg-m, with an overmolded resin construction, designed to mount directly to the transmission input shaft, and including a flux ring for an electro-magnetic shifter, with a diameter of 236 mm and a height 49 mm (provided for in subheading .00.65)FreeNo changeNo changeOn or before 12/31/

.

.

6 V lead-acid storage batteries

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.94 6 V Lead-acid storage batteries, with a maximum length of 17 cm, maximum width of 9 cm and maximum height of 17 cm, of a kind used for the source of power for medical devices (provided for in subheading .20.80)0.3%No changeNo changeOn or before 12/31/

.

.

12 V lead-acid storage batteries, used for the auxiliary source of power

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.95 12 V Lead-acid storage batteries, of a kind used for the auxiliary source of power for burglar or fire alarms and similar apparatus of subheading .10.00 (provided for in subheading .20.80)2.5%No changeNo changeOn or before 12/31/

.

.

Lead-acid storage batteries, used for wheelchairs

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.96 12 V Lead-acid storage batteries, of a kind used for the source of power for wheelchairs and mobility scooters of subheading .90.00 (provided for in subheading .20.80)3.1%No changeNo changeOn or before 12/31/

.

.

12 V lead-acid storage batteries, rated at less than 15 ampere-hours

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.97 12 V Lead-acid storage batteries, with a maximum length of 20 cm, maximum width of 10 cm and maximum height of 10 cm, rated at less than 15 ampere-hours, of a kind used for the source of power for medical devices (provided for in subheading .20.80)3%No changeNo changeOn or before 12/31/

.

.

12 V lead-acid storage batteries, rated at 15 ampere-hours or more

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.98 12 V Lead-acid storage batteries, with a maximum length of 35 cm, maximum width of 18 cm and maximum height of 25 cm, rated at 15 ampere-hours or more, of a kind used for the source of power for medical devices (provided for in subheading .20.80)3.1%No changeNo changeOn or before 12/31/

.

.

Cell box assemblies, weighing 15 kg or more but not over 18 kg

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.30.99 Lithium-ion battery cell boxes having aluminum cases, of a kind used for electrically powered motorcycles of heading , containing numerous individual lithium-ion battery cells, such cell boxes having a minimum specific energy density of 175 watt-hour per kg, a minimum volumetric specific energy of 380 watt-hour per liter and weighing 15 kg or more but not over 18 kg (provided for in subheading .60.00)FreeNo changeNo changeOn or before 12/31/

.

.

Cell box assemblies, weighing 30 kg or more but not over 36 kg

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.01 Lithium-ion battery cell boxes having aluminum cases, of a kind used for electrically powered motorcycles of heading , containing numerous individual lithium-ion battery cells, such cell boxes having a minimum specific energy density of 168 watt-hour per kg, a minimum volumetric specific energy of 370 watt-hour per liter and weighing 30 kg or more but not over 36 kg (provided for in subheading .60.00)FreeNo changeNo changeOn or before 12/31/

.

.

Cell box assemblies, weighing 36 kg or more but not over 49 kg

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.02 Lithium-ion battery cell boxes having aluminum cases, of a kind used for electrically powered motorcycles of heading , containing numerous individual lithium-ion battery cells, such cell boxes having a minimum specific energy density of 180 watt-hour per kg, a minimum volumetric specific energy of 385 watt-hour per liter and weighing 36 kg or more but not over 49 kg (provided for in subheading .60.00)FreeNo changeNo changeOn or before 12/31/

.

.

Cell box assemblies NX

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.03 Lithium-ion battery cell boxes having aluminum cases, of a kind used for electrically powered motorcycles of heading , containing numerous individual lithium-ion battery cells, such cell boxes having a minimum specific energy density of 210 watt-hour per kg, a minimum volumetric specific energy of 445 watt-hour per liter and weighing 18 kg or more but not over 30 kg (provided for in subheading .60.00)FreeNo changeNo changeOn or before 12/31/

.

.

Food processors with a capacity greater than 2.9 liters but not exceeding 3.1 liters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.04 Electromechanical food processors, of a kind used for domestic purposes, with a self-contained electric motor with a minimum of two speeds and a sealable clear plastic bowl, the foregoing having a capacity greater than 2.9 liters but not exceeding 3.1 liters, each lid being attached to the plastic bowl with a hinge, the foregoing food processors having three paddle buttons, each button featuring an indicator light (provided for in subheading .40.00)FreeNo changeNo changeOn or before 12/31/

.

.

Food processors with a capacity greater than 1.6 liters but not exceeding 2.2 liters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.05 Electromechanical food processors, of a kind used for domestic purposes, with a self-contained electric motor with a minimum of two speeds and a sealable clear plastic bowl, the foregoing having a capacity greater than 1.6 liters but not exceeding 2.2 liters, each lid being attached to the plastic bowl with a hinge, the foregoing food processors having three paddle buttons, each button featuring an indicator light (provided for in subheading .40.00)FreeNo changeNo changeOn or before 12/31/

.

.

Cordless hand blenders

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.06 Electromechanical cordless handheld food and beverage blending devices, of a kind used for domestic purposes, each with a self-contained electric motor, a non-removable rechargeable lithium ion battery, and a plastic housing with a brushed aluminum trim band; the foregoing blending devices, each having a battery indicator light on the top of the handle, a variable speed control button, a safety lock and a removable stainless steel blending arm (provided for in subheading .40.00)FreeNo changeNo changeOn or before 12/31/

.

.

Cordless hand mixers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.07 Electromechanical cordless handheld food mixers, of a kind used for domestic purposes, each with a self-contained motor and a rechargeable lithium ion battery, the foregoing having at least seven speed options, a battery indicator light, and a handle containing a chrome plated speed control lever and a plastic button for ejecting beaters, each food mixer with the ability to stand on one end unassisted (provided for in subheading .40.00)FreeNo changeNo changeOn or before 12/31/

.

.

Corded hand blenders

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.08 Electromechanical domestic corded handheld food and beverage blending devices, each with a self-contained electric motor and a plastic housing with a brushed aluminum trim band and a removable stainless steel blending arm, the foregoing not having a non-removable rechargeable lithium ion battery (provided for in subheading .40.00)FreeNo changeNo changeOn or before 12/31/

.

.

Burr coffee grinders

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.09 Electromechanical burr coffee grinders, of a kind used for domestic purposes, each with an aluminum trim band, internal portafilter holder that can accommodate multiple sizes of portafilters, a self-contained electric motor, the foregoing coffee grinders having one clear plastic top storage vessel and one clear plastic bottom storage vessel, having a rotary lever for selecting grind size immediately below the top storage vessel and a grinding enclosure containing a liquid crystal display, control buttons and a rotating knob for selecting desired coffee amount (provided for in subheading .40.00) FreeNo changeNo changeOn or before 12/31/

.

.

Electric food processors with bowl scraper

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.10 Electromechanical food processors of a kind used for domestic purposes, each containing an electric motor with an output wattage not exceeding 450 W, a processing bowl with a capacity no greater than 1.9 liters, a twist-locking lid, a built­-in bowl scraper controlled by a rotating handle on the lid, a stainless steel S-blade for chopping and mixing and a reversible disc for slicing and shredding (provided for in subheading .40.00) 1.2%No changeNo changeOn or before 12/31/

.

.

Electric food processors with snap-locking lid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.11 Electromechanical food processors of a kind used for domestic purposes, each containing an electric motor with an output wattage not exceeding 500 W, a processing bowl with a capacity greater than 1.9 liters but not exceeding 2.88 liters, a lid-locking mechanism incorporating one or more clips, a stainless steel S-blade for chopping and mixing and a blade for slicing and shredding (provided for in subheading .40.00)2.6%No changeNo changeOn or before 12/31/

.

.

Electric juice extractors

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.12 Electromechanical juice extractors of a kind used for domestic purposes, each containing an electric motor with an output wattage of 800 W or greater, a chute measuring 7.62 cm in width, a pulp bin and a mesh filtering basket with an integrated cutting blade designed to separate pulp from juice (provided for in subheading .40.00) 3.3%No changeNo changeOn or before 12/31/

.

.

Electric drink mixers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.13 Electromechanical drink mixers of a kind used for domestic purposes, each including two-speed settings, a tiltable mixing head, a stainless steel mixing cup with a capacity no greater than 0.83 liters and no more than one spindle (provided for in subheading .40.00) FreeNo changeNo changeOn or before 12/31/

.

.

Spiralizing food processors with a capacity equal to or greater than 2.36 liters but not exceeding 2.64 liters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.14 Electromechanical food processors of a kind used for domestic purposes, each containing an electric motor with an output wattage not exceeding 450 W, a capacity equal to or greater than 2.36 liters but not exceeding 2.64 liters, a twist-locking lid, spiral blade, ribbon blade, reversible stainless steel disc and stainless steel S-blade attachments (provided for in subheading .40.00), the foregoing without a locking arm designed to secure the lid or a dough kneading blade FreeNo changeNo changeOn or before 12/31/

.

.

Spiralizing food processors with a capacity equal to or greater than 2.83 liters but not exceeding 3.07 liters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.15 Electromechanical food processors of a kind used for domestic purposes, each containing an electric motor with an output wattage not exceeding 450 W, a capacity equal to or greater than 2.83 liters but not exceeding 3.07 liters, a locking arm designed to secure the lid, a pour spout, spiral blade, ribbon blade, reversible stainless steel disk, S-blade and a dough blade designed for kneading (provided for in subheading .40.00), the foregoing not including an attachment designed for dicing FreeNo changeNo changeOn or before 12/31/

.

.

Dicing food processors

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.16 Electromechanical food processors of a kind used for domestic purposes, each containing an electric motor with an output wattage not exceeding 600 W, a capacity of at least 3.31 liters, a locking arm designed to secure the lid, a pour spout, an attachment designed for dicing, a slicing blade, a shredding disc, a S-blade and a dough blade designed for kneading (provided for in subheading .40.00)FreeNo changeNo changeOn or before 12/31/

.

.

Compact food processor with smoothie function

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.17 Electromechanical food processors of a kind used for domestic purposes, each containing an electric motor with an output wattage not exceeding 250 W, a capacity not exceeding 0.94 liters and two clamps designed to secure the lid (provided for in subheading .40.00)FreeNo changeNo changeOn or before 12/31/

.

.

Juice extractors

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.18 Electromechanical domestic juice extractors, each with a self-contained electric motor with an output wattage not exceeding W, an 8.89 cm wide chute and a pitcher with a capacity no greater than 1 liter (provided for in subheading .40.00)FreeNo changeNo changeOn or before 12/31/

.

.

Integrated baby food making systems

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.19 Integrated baby food making systems, such systems including: (i) an electromechanical nutrient extractor of a kind used for domestic purposes to puree baby food, each with a self-contained electric motor with a maximum output wattage of 200 W and two interchangeable blade assemblies; (ii) an open-topped batch bowl with a capacity of 0.94 liters; (iii) a single-serve, double-handled tip-proof cup with a capacity of 0.29 liters and a twist-off lid; (iv) six single-serve storage cups, each with a capacity of 0.05 liters and twist-off lids with numerical dials; (v) a spatula; and (vi) a freezer tray with a six-cup grid and a lid (provided for in subheading .40.00)FreeNo changeNo changeOn or before 12/31/

.

.

Electric juice mixers and grinders

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.20 Electromechanical combination food grinders, juicers and mixers of a kind used for domestic purposes, each consisting of a base with a self-contained electric motor with an output wattage not exceeding 1,400 W, a stainless-steel blade assembly, and three interchangeable stainless-steel square jars with a capacity of 0.5 liters or more and not exceeding 1.5 liters, the foregoing with lids fitted with gaskets and locking tabs (provided for in subheading .40.00)FreeNo changeNo changeOn or before 12/31/

.

.

Ultrasonic humidifiers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.21 Electromechanical ultrasonic humidifiers, each with self-contained electric motor, of a kind used for domestic purposes, with cool and warm mist, with clean transducer ultrasonic membrane light (provided for in subheading .80.50)3.2%No changeNo changeOn or before 12/31/

.

.

Automatic litterboxes, valued no more than $100

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.22 Litterboxes, each with self-contained electric motor powered by an external adapter that plugs into a wall socket or electrical outlet and may have batteries for back-up, such devices which rake and/or disperse cat waste into a compartment after a certain amount of time has passed once the mechanism is triggered by cat entering the litterbox; the foregoing designed for domestic use, valued no more than $100 (provided for in subheading .80.50)FreeNo changeNo changeOn or before 12/31/

.

.

Electric toothbrushes

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.23 Battery-operated electric toothbrushes (provided for in subheading .80.50)3.6%No changeNo changeOn or before 12/31/

.

.

Ultrasonic cool/warm mist humidifiers with aromatherapy

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.24 Ultrasonic humidifiers with self-contained electric motor, with options for warm or cool mist, four output settings, having a 3.785 liter tank capacity, a drawer for aromatherapy oils, with a rectangular base measuring 23.6 cm by 22.1 cm by 23.9 cm, weighing no more than 5 kg empty and valued $15 or more but not over $19 (provided for in subheading .80.50) 0.8%No changeNo changeOn or before 12/31/

.

.

2-in-1 can opener

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.25 Hand-held battery-operated automatic can openers, each with self-contained electric motor, such can openers with a weight not exceeding 1.36 kg exclusive of extra interchangeable parts or detachable auxiliary devices (provided for in subheading .80.50)Free No changeNo changeOn or before 12/31/

.

.

Food spiralizing devices

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.26 Food spiralizing devices of a kind used for domestic purposes, designed for use on electromechanical food stand mixers, such devices designed for peeling, coring and slicing fruits and vegetables and capable of cutting such food into spiral strands and shapes, the foregoing with four or more interchangeable cutting blades and a peeling blade (provided for in subheading .90.55)Free No changeNo changeOn or before 12/31/

.

.

Ceramic bowls

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.27 Ceramic bowls designed for use on electromechanical stand food mixers, each having a capacity greater than 4.5 liters but not exceeding 4.9 liters, the foregoing each having a base with four protrusions designed to interlock with a stand food mixer base (provided for in subheading .90.55)Free No changeNo changeOn or before 12/31/

.

.

Food grinders for certain electromechanical stand food mixers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.28 Food grinding devices designed for use on electromechanical domestic food stand mixers, each having a molded plastic or metal housing with a singular stainless steel blade, and an auger (provided for in subheading .90.55) Free No changeNo changeOn or before 12/31/

.

.

Pasta press extruders for certain stand food mixers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.29 Pasta-making devices designed for use on electromechanical domestic stand food mixers, each having a molded plastic housing with metal auger and cutting arm, the foregoing having five interchangeable steel discs for forming various pasta shapes (provided for in subheading .90.55) Free No changeNo changeOn or before 12/31/

.

.

Stainless steel bowls for certain electromechanical stand food mixers, with capacity greater than 4.2 liters but not exceeding 4.8 liters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.30 Stainless steel bowls designed for use on electromechanical stand food mixers, each having a capacity greater than 4.2 liters but not exceeding 4.8 liters (whether or not having a single stainless steel vertically oriented welded handle), the foregoing each having a rolled top edge and welded stainless steel base with four protrusions designed to interlock with a stand food mixer base (provided for in subheading .90.55) 0.7%No changeNo changeOn or before 12/31/

.

.

Stainless steel bowls for certain electromechanical stand food mixers, with capacity greater than 2.8 liters but not exceeding 3.4 liters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.31 Stainless steel bowls designed for use on electromechanical stand food mixers, each having a capacity greater than 2.8 liters but not exceeding 3.4 liters (whether or not having a single stainless steel vertically oriented welded handle), the foregoing each having a rolled top edge and welded stainless steel base with four protrusions designed to interlock with a stand food mixer base (provided for in subheading .90.55) Free No changeNo changeOn or before 12/31/

.

.

Stainless steel bowls for certain electromechanical stand food mixers, with capacity greater than 5.6 liters but not exceeding 8.6 liters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.32 Stainless steel bowls designed for use on electromechanical stand food mixers, each having a capacity greater than 5.6 liters but not exceeding 8.6 liters (whether or not having a single stainless steel vertically oriented welded handle), the foregoing each having a rolled edge and two welded stainless steel side brackets with circular holes designed to interlock with the arm of the stand mixer (provided for in subheading .90.55) Free No changeNo changeOn or before 12/31/

.

.

Pasta rollers and cutters for stand food mixers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.33 Metal pasta rolling and cutting devices designed for use on electromechanical food stand mixers, each not having a molded plastic housing (provided for in subheading .90.55) 1%No changeNo changeOn or before 12/31/

.

.

Glass bowls for certain electromechanical stand food mixers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.34 Glass bowls designed for use on electromechanical stand food mixers, each having a capacity greater than 4.5 liters but not exceeding 4.9 liters, the foregoing each having a base with four protrusions designed to interlock with a stand food mixer base (provided for in subheading .90.55) Free No changeNo changeOn or before 12/31/

.

.

Body trimmers for detailed hair trimming

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.35 Hair clippers, with self-contained electric motor, vertical reciprocating stamped stainless steel blade and aluminum housing (provided for in subheading .20.90) Free No changeNo changeOn or before 12/31/

.

.

Hair clipper sets

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.36 Hair clipper sets, with self-contained electric motor, comprised of blade guide combs and one or more hair clippers, wherein at least one clipper is corded, has a non-detachable ground steel blade and is used for human hair, all put up in sets for retail sale, valued at $5 or less (provided for in subheading .20.90) Free No changeNo changeOn or before 12/31/

.

.

Rechargeable trimmers for trimming human hair

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.37 Hair clipper set, with self-contained electric motor, comprised of blade guide combs, detailers and one or more hair clippers, wherein at least one clipper has a rechargeable lithium-ion battery, a detachable ground steel blade and is used for human hair, all put up in sets for retail sale, valued at $6 or less (provided for in subheading .20.90) Free No changeNo changeOn or before 12/31/

.

.

PCB assemblies for clippers and trimmers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.38 Subassemblies consisting of a printed circuit board, power connector, rechargeable lithium ion battery and motor, designed for use with hair clippers of subheading .20.90 or shavers of subheading .10.00 (provided for in subheading .90.40) Free No changeNo changeOn or before 12/31/

.

.

LED bicycle wheel spoke lights

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.39 Bicycle signaling lights, consisting of one light-emitting diode (LED), measuring between 2.54 to 12.192 cm in width and 2.54 to 4.572 cm in height, with mechanism to attach to wheel spokes, each light valued not more than $4 (provided for in subheading .10.40) Free No changeNo changeOn or before 12/31/

.

.

Bicycle rear lights

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.40 Electrical visual signaling equipment of a kind used as taillights on bicycles (provided for in subheading .10.40) Free No changeNo changeOn or before 12/31/

.

.

Portable electric lamps

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.41 Portable battery powered, handheld LED lantern, other than lighting equipment of heading , having a collapsible plastic body, measuring not greater than 22 cm in height (provided for in subheading .10.40) Free No changeNo changeOn or before 12/31/

.

.

Space heaters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.42 Fan-forced, portable electric space heaters, each having a power consumption of not more than 1.5 kW and weighing more than 1.5 kg but not more than 17 kg, whether or not incorporating a humidifier or air filter (provided for in subheading .29.00) Free No changeNo changeOn or before 12/31/

.

.

Microwave ovens with capacity not exceeding 22.5 liters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.43 Microwave ovens of a kind used for domestic purposes, each having a capacity not exceeding 22.5 liters (provided for in subheading .50.00) 1.7% No changeNo changeOn or before 12/31/

.

.

Microwave ovens with capacity exceeding 22.5 liters but not exceeding 31 liters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.44 Microwave ovens of a kind used for domestic purposes, each having a capacity exceeding 22.5 liters but not exceeding 31 liters (provided for in subheading .50.00) 1.7% No changeNo changeOn or before 12/31/

.

.

Low-profile microwave ovens with electronic opening mechanism and integral range hood

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.45 Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having a height not exceeding 28 cm and having oven capacity greater than 31 liters but not exceeding 32 liters and containing a glass turntable plate with a diameter greater than 30 cm but not exceeding 31 cm, the foregoing ovens with a width greater than 75 cm but not exceeding 77 cm and having two interior fan motors and an electronic opening mechanism (provided for in subheading .50.00) FreeNo changeNo changeOn or before 12/31/

.

.

Low-profile microwave ovens with push button opening mechanism and integral range hood

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.46 Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having a height not exceeding 28 cm, each having oven capacity greater than 31 liters but not exceeding 32 liters and containing a glass turntable plate with a diameter greater than 30 cm but not exceeding 31 cm, the foregoing ovens with a width greater than 75 cm but not exceeding 77 cm, and having a single interior fan motor and a push-button opening system (provided for in subheading .50.00) FreeNo changeNo changeOn or before 12/31/

.

.

Low-profile microwave ovens with electronic opening mechanism and without a range hood

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.47 Microwave ovens of a kind used for domestic purposes, each without a range hood, each having oven capacity greater than 31 liters but not exceeding 32 liters, the foregoing containing a glass turntable plate with a diameter greater than 30 cm but not exceeding 31 cm, and an electronic opening mechanism (provided for in subheading .50.00) FreeNo changeNo changeOn or before 12/31/

.

.

Searing grills

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.48 Electrothermic grills of a kind used for domestic purposes, each with a maximum temperature of 233 °C (provided for in subheading .60.60); the foregoing excluding goods described in .16.56 FreeNo changeNo changeOn or before 12/31/

.

.

Automatic drip coffee makers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.49 Electrothermic automatic drip coffee makers of a kind used for domestic purposes, each capable of brewing multiple servings and incorporating a removable water tank with a handle and having a liquid crystal display and control buttons adjacent to the removable water tank, and a brew button in the coffee maker base; the foregoing excluding coffee makers designed for permanent installation into a wall, cabinet or shelf, and excluding coffee makers designed to utilize coffee capsules or pods (provided for in subheading .71.00) FreeNo changeNo changeOn or before 12/31/

.

.

Espresso machines

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.50 Electromechanical espresso makers of a kind used for domestic purposes, each with an aluminum trim band, each incorporating a removable water tank with a handle and having a metal or plastic enclosure containing seven indicator lights and four chrome plated control buttons, the foregoing with two temperature sensors to regulate water temperature (provided for in subheading .71.00) FreeNo changeNo changeOn or before 12/31/

.

.

Coffee makers with dishwasher safe removable parts

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.51 Automatic drip electric coffeemakers, each with latch-release removable and dishwasher safe water reservoir with a 2.83 liter capacity, brew basket and showerhead, valued not over $19 (provided for in subheading .71.00) FreeNo changeNo changeOn or before 12/31/

.

.

Single-service coffee makers with milk frothers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.52 Electrothermic coffee machines of a kind used for domestic purposes, designed to brew single servings using coffee capsules, each having a loading lever containing both stainless steel and plastic and a milk frother with a fold-up power base (provided for in subheading .71.00), the foregoing excluding coffee makers with a removable reservoir FreeNo changeNo changeOn or before 12/31/

.

.

Electric coffee makers with dual dispensers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.53 Electrothermic coffee machines of a kind used for domestic purposes, each with two dispensers to allow brewing using capsules and ground coffee, with a spent capsule collection bin and a single removable reservoir with a capacity equal to or greater than 1.65 liters (provided for in subheading .71.00) FreeNo changeNo changeOn or before 12/31/

.

.

Electric coffee makers for brewing capsules

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.54 Electrothermic coffee machines of a kind used for domestic purposes, designed to brew using only coffee capsules, each having a loading lever containing both stainless steel and plastic and a removable reservoir with a capacity no greater than 1.18 liters (provided for in subheading .71.00) FreeNo changeNo changeOn or before 12/31/

.

.

Automatic or manual pour over coffee makers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.55 Electrothermic coffee machines of a kind used for domestic purposes, each capable of brewing multiple servings using an automatic drip or manual pour over with a capacity equal to or greater than 1.89 liters, the foregoing including a glass carafe, a cone-shaped brew basket and a permanent filter (provided for in subheading .71.00) FreeNo changeNo changeOn or before 12/31/

.

.

Removable reservoir coffeemakers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.56 Electrothermic automatic drip coffee makers of a kind used for domestic purposes, each capable of brewing multiple servings and incorporating a removable water tank with a handle, the foregoing excluding coffee makers with dome-shaped housing or designed for permanent installation into a wall, cabinet or shelf and excluding coffee makers designed to utilize coffee capsules or pods (provided for in subheading .71.00); the foregoing excluding coffee makers with a brew button in the coffee maker baseFreeNo changeNo changeOn or before 12/31/

.

.

Single serve coffee makers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.57 Electrothermic coffee machines of a kind used for domestic purposes, capable of brewing single servings using coffee capsules or ground coffee, each with not more than one water reservoir with a capacity not exceeding 0.41 liters, the foregoing including a coffee ground filter basket (provided for in subheading .71.00) 3% No changeNo changeOn or before 12/31/

.

.

2-way coffee makers with a 12-cup carafe and a pod brewer

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.58 Electrothermic coffee machines of a kind used for domestic purposes, each with dual dispensers to allow brewing single serving or multiple servings using capsules and ground coffee, a glass carafe with a capacity not exceeding 2.83 liters, and two separate non-removable water reservoirs, the foregoing without a spent capsule collection bin (provided for in subheading .71.00) 3.2%No changeNo changeOn or before 12/31/

.

.

Rapid cold brew and hot coffee makers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.59 Electrothermic coffee machines of a kind used for domestic purposes, designed to brew both cold or hot coffee using coffee grounds with a rotating knob to select between settings (provided for in subheading .71.00) Free No changeNo changeOn or before 12/31/

.

.

Electric kettles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.60 Electrothermic kettles of a kind used for domestic purposes, each with a stainless-steel construction, 1.7-liter capacity, pop-up lid, removable mesh filters, and a handle having a translucent capacity indicator, the foregoing having a base with digital Liquid Crystal Display (LCD) paneled controls, including variable temperature settings (provided for in subheading .71.00) Free No changeNo changeOn or before 12/31/

.

.

Electric toasters with even-toast feature

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.61 Electrothermic toasters of a kind used for domestic purposes, each toaster measuring 28.19 cm in length, 17.3 cm in width and 20.32 cm in height and incorporating two single-slice toaster slots measuring 13.7 cm in length at the top of the toaster, with a slide-out crumb tray, the foregoing with a function designed to turn off the center heating element after a certain toasting time has elapsed (provided for in subheading .72.00) Free No changeNo changeOn or before 12/31/

.

.

Electric toasters with 6.5 inch slots

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.62 Electrothermic toasters of a kind used for domestic purposes, each incorporating two single-slice toaster slots measuring 16.51 cm in length at the top of the oven, the foregoing with a function designed to turn off the center heating element after a certain toasting time has elapsed (provided for in subheading .72.00) Free No changeNo changeOn or before 12/31/

.

.

Electric toasters with 37 mm wide slots, with an under-base cord wrap

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.63 Electrothermic toasters of a kind used for domestic purposes, each incorporating two single-slice toaster slots measuring 37 mm in width at the top of the oven, with a slide-out crumb tray, under-base cord wrap, toast shade selector and a programmable setting to hold the toast in the slot for three minutes after toasting (provided for in subheading .72.00) Free No changeNo changeOn or before 12/31/

.

.

2- and 4- slot toasters, not having a button to keep toaster contents warm after toasting

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.64 Electrothermic toasters, of a kind used for domestic purposes, with two or four toaster slots, each toaster slot with a width exceeding 3.8 cm but not exceeding 4 cm, the foregoing toasters each having one or two plastic buttons used to eject toaster contents and one or two plastic buttons used to lower power to heating elements for desired toasting; each toaster not having a button to keep toaster contents warm after toasting or a button to defrost, the foregoing toasters having one or two plastic knobs, each knob with no more than five options for selecting different degrees of shading, and a manual lift lever (provided for in subheading .72.00) Free No changeNo changeOn or before 12/31/

.

.

2-slot toasters, with a button to keep toaster content warm after toasting

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.65 Electrothermic toasters, of a kind used for domestic purposes, each with two toaster slots, each toaster slot with a width exceeding 3.8 cm but not exceeding 4 cm, the foregoing toasters each having singular plastic buttons used to defrost, eject toaster contents, lower power to heating elements for desired toasting, and to keep toaster contents warm at the end of a completed toasting cycle, and each toaster having one plastic knob to select up to six varying degrees of shading, and a manual lift lever (provided for in subheading .72.00) Free No changeNo changeOn or before 12/31/

.

.

Electric toasters with double-slice slots

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.66 Electrothermic toasters of a kind used for domestic purposes, each incorporating two 37 mm wide double-slice toaster slots at the top of the oven, with a slide-out crumb tray, under-base cord wrap, toast shade selector, and a programmable setting to hold the toast in the slot for three minutes after toasting (provided for in subheading .72.00) Free No changeNo changeOn or before 12/31/

.

.

Electric toasters with 37 mm wide slots, with a retractable cord

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.67 Electrothermic toasters of a kind used for domestic purposes, each incorporating two single-slice toaster slots measuring 37 mm in width at the top of the oven, with a slide-out crumb tray, retractable cord, toast shade selector and a manually activated setting to hold the toast in the slot after toasting (provided for in subheading .72.00) Free No changeNo changeOn or before 12/31/

.

.

Electric pressure cookers rated more than 800 W but not more than 1,000 W, with a capacity of not less than 5 liters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.68 Electrothermic pressure cookers of a kind used for domestic purposes, with a capacity of not less than 5 liters and rated from 800 W to 1,000 W (provided for in subheading .79.00); the foregoing excluding pressure cookers with a lift-out steaming rack designed for roasting/steaming, extra lid gasket, measuring cup and paddle and variable temperature settings 0.1% No changeNo changeOn or before 12/31/

.

.

Electric pressure cookers rated more than 1,200 W but not more than 1,400 W, with a capacity of less than 5 liters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.69 Electrothermic pressure cookers of a kind used for domestic purposes, with a capacity of less than 5 liters and rated more than 1,200 W but not more than 1,400 W (provided for in subheading .79.00) Free No changeNo changeOn or before 12/31/

.

.

Electric pressure cookers rated more than 1,000 W but not more than 1,200 W, with a capacity of less than 5 liters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.70 Electrothermic pressure cookers of a kind used for domestic purposes, with a capacity of less than 5 liters, rated more than 1,000 W but not more than 1,200 W (provided for in subheading .79.00) Free No changeNo changeOn or before 12/31/

.

.

Contoured heating pads

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.71 Electric heating pads with contoured shape measuring 38.1 cm in height and 60.96 cm in width, with removable waist strap that adjusts up to 2.16 m in circumference, with cut pile knit outer surface and four heat settings, valued not over $12, such heating pads not worn on or about the person (provided for in subheading .79.00) Free No changeNo changeOn or before 12/31/

.

.

Slow cookers with non-stick ceramic coated stoneware

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.72 Slow cookers with capacity from 5.678 liters to 6.624 liters, each having a stoneware insert with a ceramic-based nonstick coating, a locking gasket glass lid, digital control with three temperature settings and cooking timer, the foregoing valued over $15 but not over $22 (provided for in subheading .79.00) Free No changeNo changeOn or before 12/31/

.

.

Heating pads

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.73 Electrothermic heating pads of nonwoven polyester with stamp welding, having a power consumption of not more than 50 W and weighing 0.635 kg, measuring 50.8 cm by 60.96 cm; the foregoing with a removable knit 100 percent polyester fleece cover, valued between $15 and $109 (provided for in subheading .79.00) Free No changeNo changeOn or before 12/31/

.

.

Programmable slow cookers with digital display

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.74 Electrothermic slow cookers of a kind used for domestic purposes, each with a litho-wrapped steel exterior and the following features: (i) a locking glass lid, (ii) a removable oval stoneware cooking pot with a capacity not exceeding 5.68 liters, and (iii) a single digital display with a knob used to control time and temperature settings, the foregoing without a thermometer probe (provided for in subheading .79.00) Free No changeNo changeOn or before 12/31/

.

.

8-Quart electric slow cookers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.75 Electrothermic slow cookers of a kind used for domestic purposes, each with a litho-wrapped steel exterior and the following features: (i) a non-locking glass lid, (ii) a removable oval stoneware cooking pot, (iii) a volume capacity of 7.57 liters or greater, and (iv) three heat settings (keep warm, low, and high), the foregoing without a digital display or thermometer probe (provided for in subheading .79.00) 0.1%No changeNo changeOn or before 12/31/

.

.

Programmable slow cookers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.76 Electrothermic slow cookers of a kind used for domestic purposes, each with a litho-wrapped exterior and the following features: (i) non-locking glass lid, (ii) a digital control panel, and (iii) a feature designed to automatically reduce temperature at the end of the cooking cycle, the foregoing without a timer display or thermometer probe (provided for in subheading .79.00) 0.7% No changeNo changeOn or before 12/31/

.

.

Electric slow cookers with locking lid

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.77 Electrothermic slow cookers of a kind used for domestic purposes, each with a litho-wrapped exterior and the following features: (i) a capacity not exceeding 4.73 liters, (ii) a glass lid, (iii) a removable oval stoneware cooking pot, and (iv) a locking lid (provided for in subheading .79.00); the foregoing without a knob used to control time and temperature settings 0.8% No changeNo changeOn or before 12/31/

.

.

Double flip waffle makers with removable grids

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.78 Electrothermic rotating waffle makers of a kind used for domestic purposes, each with two sets of double-sided round cooking plates, non-stick removable grids, a drip tray, and a locking handle (provided for in subheading .79.00) Free No changeNo changeOn or before 12/31/

.

.

Ice cream waffle cone and bowl makers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.79 Electrothermic ice cream waffle cone and bowl makers of a kind used for domestic purposes, each with two round non-stick cooking plates (provided for in subheading .79.00), the foregoing including a plastic cone roller and a bowl mold Free No changeNo changeOn or before 12/31/

.

.

Electric breakfast sandwich makers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.80 Electrothermic sandwich cookers of a kind used for domestic purposes, each designed to be used with round bread and incorporating a cooking plate for eggs (provided for in subheading .79.00); the foregoing excluding goods described in heading .16.57 Free No changeNo changeOn or before 12/31/

.

.

Pressure cookers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.81 Electrothermic pressure cookers of a kind used for domestic purposes, with a stainless-steel construction with a capacity of not less than 5.67 liters and an output wattage not exceeding 1,000 W, a lift-out steaming rack designed for roasting/steaming, extra lid gasket and a measuring cup and paddle, the forgoing with variable temperature settings (provided for in subheading .79.00) Free No changeNo changeOn or before 12/31/

.

.

10-quart programmable slow cookers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.82 Electrothermic slow cookers of a kind used for domestic purposes with a capacity greater than 7.57 liters but not exceeding 9.46 liters, each with a full-color litho-wrapped exterior, glass lid, removable round aluminum cooking pot, and a digital control display, the foregoing without a thermometer probe (provided for in subheading .79.00) Free No changeNo changeOn or before 12/31/

.

.

Polished stainless steel 1.5-quart tea kettles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.83 Tea kettles of stainless steel, polished, each with a capacity of 1.41 liters (provided for in subheading .79.00) Free No changeNo changeOn or before 12/31/

.

.

Egg bite makers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.84 Electrothermic bite-sized egg makers, of a kind used for domestic purposes, each incorporating two circular cooking plates and a removable cover (provided for in subheading .79.00) Free No changeNo changeOn or before 12/31/

.

.

Vacuum steel insulated coffee carafes, of a kind used with deep ultraviolet lithography machines

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.85 Vacuum insulated coffee carafes used with commercial coffee machines, with interior and exterior of stainless steel, each with a capacity over 1 liter but not over 2 liters and plastic brew-through lid for direct brewing commercial coffee machines provided for in subheading .81 (provided for in subheading .90.90) Free No changeNo changeOn or before 12/31/

.

.

Vacuum steel insulated carafes for household coffee machines, of a kind used with deep ultraviolet lithography machines

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.86 Vacuum insulated carafes for coffee makers of a kind used for domestic purposes, with interior and exterior of stainless steel, each with a capacity over 1 liter but not over 2 liters with brew through top for direct brewing (provided for in subheading .90.90) Free No changeNo changeOn or before 12/31/

.

.

Vacuum steel bodies with inner and outer steel layers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.87 Vacuum vessel bodies, each with exterior layer of steel and vacuum liner of steel, with a capacity over 2 liters and a bottom port and top opening, the foregoing presented without top cover and bottom base (provided for in subheading .90.90) Free No changeNo changeOn or before 12/31/

.

.

Lamp-holder housings of plastic

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.88 Lamp-holder housings of plastics, containing sockets for screw-in Edison base (provided for in subheading .61.00) Free No changeNo changeOn or before 12/31/

.

.

660 W, 125 V, lamp-holder with two 15 amp outlets

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.89 Lamp-holders, rated for 660 W and 125 V, each with two 15 amp outlets (provided for in subheading .61.00) Free No changeNo changeOn or before 12/31/

.

.

Combination duplex receptacle/outlet and USB charger, 15'20 amp, 125 V

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.90 Dual-use electrical wall outlets incorporating one or more built-in Universal Serial Bus (USB) chargers, rated at 15'20 amp and 125 V (provided for in subheading .69.80) Free No changeNo changeOn or before 12/31/

.

.

Range and dryer receptacles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.91 Electrical receptacles consisting of straight blade outlets for mounting in walls, made of thermoplastic and steel, measuring not more than 3.4 cm in depth, 10.7 cm in height and 6.4 cm in width (provided for in subheading .69.80) Free No changeNo changeOn or before 12/31/

.

.

Residential grade receptacles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.92 Electrical receptacles of thermoplastic and steel, consisting of two outlets for mounting in walls, each weighing not more than 58.1 g, and measuring not more than 2.5 cm in depth, 10.7 cm in height and 3.4 cm in width (provided for in subheading .69.80) 1.4% No changeNo changeOn or before 12/31/

.

.

Residential and commercial USB receptacles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.93 Dual-use electrical wall outlets incorporating one or more built-in Universal Serial Bus (USB) chargers, made of a polycarbonate shell with steel framing and screws and internal circuit boards, weighing not more than 136.1 grams, and not exceeding 10.7 cm in height, 4.4 cm in width, and 4.3 cm in depth (provided for in subheading .69.80) 1.5% No changeNo changeOn or before 12/31/

.

.

Power strips

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.94 6-outlet power strips of type B sockets of 125 V, with 14 gauge cord measuring 76.2 to 91.44 cm in length, the foregoing without surge protection (provided for in subheading .10.91) FreeNo changeNo changeOn or before 12/31/

.

.

Surge protectors

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.95 6-outlet power strips of type B sockets of 125 V, with 14 gauge cord measuring 60.96 to 91.44 cm in length, with 400'10,180 joule rating for surge protection (provided for in subheading .10.91) FreeNo changeNo changeOn or before 12/31/

.

.

Programmable controllers for architectural lighting

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.96 Programmable controllers for architectural lighting effects and displays, with ethernet, digital visual interface (DVI) and DB9 ports, each in an aluminum enclosure without keyboard, capable of controlling greater than 3,000 control channels of lighting and of pixel mapping light-emitting diode (LED) arrays (provided for in subheading .10.91) FreeNo changeNo changeOn or before 12/31/

.

.

Electronic modular control panels for generators

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.97 Programmable electronic modular control panels, designed for monitoring and controlling generators and generating sets of heading and , operating at a voltage not exceeding 1,000 V, and equipped with electrical control apparatus of heading or , such as circuit breakers, auxiliary contactors, and relays, which provide a front panel user interface, such as control switches and/or a touch screen, for the electrical control and monitoring of the generator or generating set (provided for in subheading .10.91) FreeNo changeNo changeOn or before 12/31/

.

.

Power distribution modules and programmable controllers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.98 Power distribution modules and programmable controllers, for a voltage not exceeding 1,000 V (provided for in subheading .10.91), the foregoing of a kind used with machines and apparatus for the manufacture or inspection of semiconductor devices of subheading .20.00 FreeNo changeNo changeOn or before 12/31/

.

.

Glass capacitive touchscreen assemblies with LCD

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.31.99 Capacitive touchscreens bonded to liquid crystal display (LCD), equipped with two or more apparatus of heading , for electric control or the distribution of electricity, consisting of two glass layers bonded by silicon adhesive with attached flexible printed circuit with surface mount technology components, each touchscreen with diagonal measuring between 10 cm and 41 cm (provided for in subheading .10.91)FreeNo changeNo changeOn or before 12/31/

.

.

Lamps containing deuterium gas without radio-frequency identification (RFID)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.01 Ultraviolet lamps filled with deuterium gas, each without radio-frequency identification device and valued over $200 (provided for in subheading .49.00)FreeNo changeNo changeOn or before 12/31/

.

.

Lamps containing deuterium gas with radio-frequency identification (RFID)

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.02 Ultraviolet lamps filled with deuterium gas, each with radio-frequency identification device and valued over $200 (provided for in subheading .49.00) FreeNo changeNo changeOn or before 12/31/

.

.

Fiber channel coaxial cables of silver-plated copper conductors and expanded ePTFE dielectrics

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.03 Fiber channel coaxial cables of silver-plated copper conductors and expanded polytetrafluoroethylene (ePTFE) dielectrics, jacketed with fluoropolymers; such bulk cables having an operating temperature ranging from minus 55 °C to 200 °C (provided for in subheading .20.00) FreeNo changeNo changeOn or before 12/31/

.

.

Insulated coaxial cables, of a kind used with deep ultraviolet lithography machines

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.04 Insulated coaxial cables, each with a polyvinyl chloride outer coating, an outside diameter of 4 mm or more but not over 10 mm, a length of 180 cm or more but not over 270 cm (provided for in subheading .20.00), the foregoing of a kind used with medical ultrasonic scanning apparatus of subheading .12.001%No changeNo changeOn or before 12/31/

.

.

Coaxial cables insulated with ePTFE, vapor sealed, of a kind used with deep ultraviolet lithography machines

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.05 Coaxial cables insulated with expanded polytetrafluoroethylene (ePTFE), vapor sealed meeting the requirements of MIL-STD-202, method 122e, as certified by the importer (provided for in subheading .20.00)0.6%No changeNo changeOn or before 12/31/

.

.

Coaxial cables insulated with ePTFE, non-vapor sealed, of a kind used with deep ultraviolet lithography machines

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.06 Coaxial cables insulated with expanded polytetrafluoroethylene (ePTFE), non-vapor sealed (provided for in subheading .20.00)3%No changeNo changeOn or before 12/31/

.

.

Low speed automotive ethernet USB harnesses

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.07 USB 2.0 cable assemblies for automotive infotainment applications, 30 V AC (RMS)/30 V DC, rated current of 1 amp max/circuit, each with USB 4- or 5-wire cable, with or without drain wire, with USCAR-30 5-circuit plug, inline, or 4-circuit STD A receptacle connectors, solder terminated at both ends, for use as low speed Ethernet components such as in-vehicle databus, display, sensors and cameras (provided for in subheading .30.00)FreeNo changeNo changeOn or before 12/31/

.

.

High speed autolink cable USB harnesses

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.08 USB 2.0 cable assemblies for automotive infotainment applications, 30 V AC (RMS)/30 V DC, rated current of 1 amp max/circuit, each with USB 4-wire cable, with drain wire, USCAR-30 5-circuit plug or inline, 4-circuit illuminated STD A receptacle connectors, solder terminated at both ends, where the illumination is up to 1.0 FL, fixed or dimmable, for use as low speed Ethernet components such as in-vehicle databus, display, sensors and cameras (provided for in subheading .30.00)FreeNo changeNo changeOn or before 12/31/

.

.

Insulated electric conductors, of a kind used with extreme ultraviolet lithography machines

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.09 Electrical cables and cable bundles for a voltage not exceeding 1,000 V, fitted with connectors (provided for in subheading .42.90), the foregoing of a kind used with Extreme Ultraviolet (EUV) Lithography machines and apparatus for the manufacture of semiconductor devices of subheading .20.000.9%No changeNo changeOn or before 12/31/

.

.

Insulated electric conductors, of a kind used with deep ultraviolet lithography machines

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.10 Electrical cables and cable bundles for a voltage not exceeding 1,000 V, fitted with connectors (provided for in subheading .42.90), the foregoing of a kind used with Deep Ultraviolet (DUV) Lithography machines and apparatus for the manufacture of semiconductor devices of subheading .20.00FreeNo changeNo changeOn or before 12/31/

.

.

Insulated electric conductors, of a kind used with optical instruments

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.11 Electrical cables and cable bundles for a voltage not exceeding 1,000 V, fitted with connectors (provided for in subheading .42.90), the foregoing of a kind used with optical instruments and appliances for inspecting semiconductor wafers of .41.00FreeNo changeNo changeOn or before 12/31/

.

.

Rings, blocks, and other insulating fittings of quartz

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.12 Rings, blocks, and other insulating fittings of quartz (provided for in subheading .90.00), the foregoing of a kind used with machines and apparatus for the manufacture or inspection of semiconductor devices of subheading .20.00 3.3%No changeNo changeOn or before 12/31/

.

.

Front tire splash guards for vehicles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.13 Front tire splash guards of thermoplastic polyolefin, composed of 85 to 87 percent ethylene propylene and 9 to 11 percent talc (provided for in subheading .29.50) FreeNo changeNo changeOn or before 12/31/

.

.

Rear tire splash guards for vehicles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.14 Rear tire splash guards of thermoplastic polyolefin, composed of 85 to 87 percent ethylene propylene and 9 to 11 percent talc (provided for in subheading .29.50)FreeNo changeNo changeOn or before 12/31/

.

.

Automatic gear boxes

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.15 Automatic gear boxes used for vehicles of headings and , other than goods described in heading .17.01, each with 14 speeds and torque ratings of 280 kg/m (provided for in subheading .40.11)1.5%No changeNo changeOn or before 12/31/

.

.

Suspension systems (struts) for off-highway trucks

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.16 Struts used in suspension systems for vehicles of headings (provided for in subheading .80.16)1.2%No changeNo changeOn or before 12/31/

.

.

Suspension system stabilizer bars

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.17 Suspension system stabilizer bars of alloy steel, weighing between 35 and 44 kg, designed for use in Class 7 and Class 8 heavy duty trucks only (provided for in subheading .80.65)FreeNo changeNo changeOn or before 12/31/

.

.

Tie rod assemblies

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.18 Tie rod assemblies of steering columns and steering boxes; parts thereof (provided for in subheading .94.75)0.4%No changeNo changeOn or before 12/31/

.

.

Used axle housings

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.19 Used axle housings (spindles) for vehicles of heading (provided for in subheading .99.68)FreeNo changeNo changeOn or before 12/31/

.

.

Used parts for power trains

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.20 Used final drive and wheel assemblies for power trains, such final drive and wheel assemblies consisting of planetary gear reduction final drives and wheel assemblies, brake discs or rotors and a wheel hub for vehicles of heading (provided for in subheading .99.68)2%No changeNo changeOn or before 12/31/

.

.

Front windshield covers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.21 Front windshield cover constructed of 100 percent water resistant polyester, having an elastic attachment system, side view mirror covers, wiper protector cover and a dry storage pouch when not in use (provided for in subheading .99.81)FreeNo changeNo changeOn or before 12/31/

.

.

Expansion chambers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.22 Expansion chambers, each consisting of a blow molded tube shaped HDPE plastic body, measuring approximately 59.89 cm in width, 73.17 cm in length and 26.46 cm in height, designed for permanent welding to a gasoline or diesel fuel tank body (provided for in subheading .99.81)FreeNo changeNo changeOn or before 12/31/

.

.

Bicycle racks for car roofs

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.23 Roof mounted bicycle rack trays for motor vehicles, such trays designed to transport bicycles (provided for in subheading .99.81) 2.4%No changeNo changeOn or before 12/31/

.

.

High pressure fuel injector rails

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.24 High pressure fuel injector rails made of steel alloy used to transport fuel from a pump to fuel injectors on a diesel engine principally used in articles under heading or (provided for in subheading .99.81)FreeNo changeNo changeOn or before 12/31/

.

.

Stand-up bicycles, having both wheels exceeding 63.5 cm in diameter

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.25Stand-up bicycles each with no seat, no seat tube, and no seat stay, designed to be pedaled by a user in a standing position only, such bicycles having both wheels exceeding 63.5 cm in diameter (provided for in subheading .00.35) FreeNo changeNo changeOn or before 12/31/

.

.

Elliptical cycles, with wheels not exceeding 63.5 cm in diameter

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.26 Cycles, each either with two wheels or with three wheels and having all wheels exceeding 63.5 cm in diameter; all the foregoing propelled by laterally mounted pedals designed to be pushed in an alternative elliptical step motion (provided for in subheading .00.50)FreeNo changeNo changeOn or before 12/31/

.

.

Bicycle frames, other than of steel, valued $600 or less

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.27 Bicycle frames, other than of steel, valued not over $600 each (provided for in subheading .91.30)2.8%No changeNo changeOn or before 12/31/

.

.

Internal gear bicycle hubs, other than two or three speeds

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.28 Variable speed internal gear hubs for bicycles, other than two or three speed hubs (provided for in subheading .93.28)FreeNo changeNo changeOn or before 12/31/

.

.

Bicycle pedals other than clipless pedals

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.29 Flat pedals and parts thereof (provided for in subheading .96.10); the foregoing excluding clipless bicycle pedals and parts thereof5.7%No changeNo changeOn or before 12/31/

.

.

Clipless bicycle pedals and parts thereof

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.30 Clipless bicycle pedals and parts thereof (provided for in subheading .96.10)3.8%No changeNo changeOn or before 12/31/

.

.

Carbon fiber bicycle seatposts

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.31 Seat posts of carbon fiber, such seat posts designed for use on bicycles (provided for in subheading .99.80) 1%No changeNo changeOn or before 12/31/

.

.

Bicycle handlebar tape, other than silicon or leather tape

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.32 Handlebar tape, other than of silicon or of leather, such tape designed for use on bicycles (provided for in subheading .99.80) 4.2%No changeNo changeOn or before 12/31/

.

.

Trailer cycles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.33 Trailer cycles with a steel or aluminum frame, a single wheel measuring approximately 50-52 cm, a seat, a crankset, pedals and a handlebar designed for child riders (provided for in subheading .99.80) FreeNo changeNo changeOn or before 12/31/

.

.

Dropper seatposts

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.34 Bicycle seatposts of aluminum with an internal mechanism to adjust saddle height while riding using a remote lever control (provided for in subheading .99.80) 5%No changeNo changeOn or before 12/31/

.

.

Bicycle fenders

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.35 Bicycle fenders other than of steel (provided for in subheading .99.80) FreeNo changeNo changeOn or before 12/31/

.

.

Bicycle handlebars

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.36 Bicycle handlebars, other than steel bicycle handlebars with a stem clamp diameter of 25.4 millimeters or less (provided for in subheading .99.80) 5.6%No changeNo changeOn or before 12/31/

.

.

Multi-functional steel carts

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.37 Multi-functional carts of steel, not mechanically propelled, each with a capacity less than 0.125 cubic meters, such carts designed to function as a combined dolly, wheelbarrow and work cart (provided for in subheading .80.50) FreeNo changeNo changeOn or before 12/31/

.

.

Non-mechanically propelled industrial hand truck

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.38 Four wheeled non-motorized carts constructed primarily of base metal, such carts designed to move lithography equipment modules, apparatus and parts thereof (provided for in subheading .80.50) 0.3%No changeNo changeOn or before 12/31/

.

.

Moving dollies

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.39 Moving dollies, of hardwood, not mechanically propelled, measuring greater than 45.72 cm but not exceeding 76.2 cm in length, and greater than 30.48 cm but not exceeding 45.72 cm in width; each mounted on casters with a diameter not exceeding 8 cm, such dollies valued not over $9 each (provided for in subheading .80.50) 3.1%No changeNo changeOn or before 12/31/

.

.

Paragliders, paraglider wings and paraglider harnesses

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.40 Paragliders, paraglider wings, and paraglider harnesses (provided for in heading .00.00) FreeNo changeNo changeOn or before 12/31/

.

.

Sailing catamarans and power catamarans

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.41 Sailboats, for pleasure or sports, with an auxiliary motor, exceeding 9.2 m in length (provided for in subheading .91.00) 1.2%No changeNo changeOn or before 12/31/

.

.

Projection lenses

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.42 Projection lenses, each with focal length of 5.2 mm or more but not over 165.0 mm, throw ratio of 0.28:1 or more but not over 12:1 and focus range optical 0.45 m or more but not over 40 m, the foregoing not exceeding 15 kg in weight (provided for in subheading .11.40) FreeNo changeNo changeOn or before 12/31/

.

.

Mounted optical lenses

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.43 Mounted optical lenses of molded plastic or optically worked glass, measuring between 15 mm and 25 mm in height and between 10 mm and 14 mm in diameter, such lenses mounted in a barrel of brass, aluminum or similar metal (provided for in subheading .11.90) FreeNo changeNo changeOn or before 12/31/

.

.

Objective lenses for broadcast cameras

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.44 Objective lenses with a B4 mount, such lenses for cameras with 11 mm diagonal sensors (provided for in subheading .11.90) 1.1%No changeNo changeOn or before 12/31/

.

.

Objective lenses for cinema cameras

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.45 Objective lenses with a positive lock mount for cameras with diagonal sensors of more than 28 mm but less than 46 mm (provided for in subheading .11.90) FreeNo changeNo changeOn or before 12/31/

.

.

Magnifying spectacles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.46 Magnifying spectacles consisting of spectacle frames with convex lenses worn to enlarge images (provided for in subheading .90.00) FreeNo changeNo changeOn or before 12/31/

.

.

LCD television panel assemblies, with a video display measuring over 175.26 cm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.47 Liquid crystal display (LCD) television panel assemblies, each with a video display diagonal measuring over 175.26 cm (provided for in subheading .80.90) FreeNo changeNo changeOn or before 12/31/

.

.

LCD television panel assemblies, with a video display measuring over 149.86 cm but not over 175.26 cm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.48 Liquid crystal display (LCD) television panel assemblies, each with a video display diagonal measuring over 149.86 cm but not over 175.26 cm (provided for in subheading .80.90) FreeNo changeNo changeOn or before 12/31/

.

.

LCD television panel assemblies, with a video display measuring over 139.7 cm but not over 149.86 cm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.49 Liquid crystal display (LCD) television panel assemblies, each with a video display diagonal measuring over 139.7 cm but not over 149.86 cm (provided for in subheading .80.90) FreeNo changeNo changeOn or before 12/31/

.

.

LCD television panel assemblies, with a video display measuring over 137.16 cm but not over 139.7 cm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.50 Liquid crystal display (LCD) television panel assemblies, each with a video display diagonal measuring over 137.16 cm but not over 139.7 cm (provided for in subheading .80.90) FreeNo changeNo changeOn or before 12/31/

.

.

Housings designed for infrared lenses

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.51 Lens housings of aluminum alloy, with or without anodization, designed for infrared lenses with diameters not less than 10 mm and not more than 100 mm (provided for in subheading .90.80) FreeNo changeNo changeOn or before 12/31/

.

.

Electronic temperature indicators, weighing 14.2 g

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.52 Electrical data monitors, of a kind used to measure ambient temperature, each designed for single use, with customizable alarm settings, liquid crystal display (LCD) screen, enclosed in plastic housing measuring 4.1 cm by 4.9 cm by 0.8 cm, weighing 14.2 g (provided for in subheading .80.10)FreeNo changeNo changeOn or before 12/31/

.

.

Electronic temperature indicators, weighing 64.4 g

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.53 Electrical data monitors, of a kind used for measuring ambient temperatures and designed for single use, each with a programmable alarm and liquid crystal display (LCD) screen, enclosed in a plastic housing, measuring 98.9 mm in length, 58 mm in width, 17.7 mm in height and weighing 64.4 g (provided for in subheading .80.10)FreeNo changeNo changeOn or before 12/31/

.

.

Electronic temperature indicators, weighing 430 g

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.54 Electrical data monitors, each with sensors to measure temperature, light, motion, and jamming detection, and capable of transmitting such data using cellular 3G networks, each with a liquid crystal display (LCD), encased in a plastic housing, measuring 132.05 mm in height, 148.07 mm in width, 25.2 mm in diameter, containing a 10.4 Ahr lithium ion battery, and weighing 430 g (provided for in subheading .80.10)FreeNo changeNo changeOn or before 12/31/

.

.

Global cargo trackers, weighing 660 g

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.55 Electrical data monitors, each with sensors to monitor location, temperature, light, motion and jamming detection, capable of transmitting such data using cellular 3G networks, with a liquid crystal display (LCD) encased in a plastic housing, measuring 170.05 mm in height, 148.01 mm in width, 26.72 mm in diameter, containing a 20.8 Ahr lithium ion battery, and weighing 660 g (provided for in subheading .80.10)FreeNo changeNo changeOn or before 12/31/

.

.

Temperature data monitors, weighing 115 g

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.56 Electrical data monitors, each with sensors to measure temperature, light and location and each capable of transmitting such data using cellular 2G networks, of a kind used in the transportation of goods, enclosed in a plastic housing measuring 101 mm by 65 mm by 29 mm, weighing 115 g (provided for in subheading .80.10)FreeNo changeNo changeOn or before 12/31/

.

.

Temperature data monitors, weighing 138.9 g

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.57 Electrical data monitors, each with sensors to measure temperature, light and location and each capable of transmitting such data using cellular 3G networks, of a kind used in the transportation of goods, enclosed in a plastic housing measuring 101 mm by 65 mm by 29 mm, weighing 138.9 g (provided for in subheading .80.10)FreeNo changeNo changeOn or before 12/31/

.

.

Temperature data monitors, weighing 133.2 g

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.58 Electrical data monitors, each with sensors to measure temperature, light and location and each capable of transmitting such data using cellular 2G networks, of a kind used in the transportation of goods, enclosed in a plastic housing measuring 101 mm by 65 mm by 29 mm, weighing 133.2 g (provided for in subheading .80.10)FreeNo changeNo changeOn or before 12/31/

.

.

Parts and accessories of bicycle speedometers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.59 Parts and accessories of bicycle speedometers (provided for in subheading .90.40)FreeNo changeNo changeOn or before 12/31/

.

.

Wired remote controllers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.60 Thermostats designed for use with indoor fan coils, each with a screen, six buttons, electrical components and covered in a plastic coating, such thermostats measuring 190.5 mm in length, 287.02 mm in width and 157.5 mm in height (provided for in subheading .10.00)FreeNo changeNo changeOn or before 12/31/

.

.

Analog/digital wrist watches

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.61 Analog/digital wrist watches (other than those of heading ), electrically operated, whether or not incorporating a stop watch facility, such watches having no jewels or only one jewel in the movement and with bracelet other than of textile material or of base metal (provided for in subheading .19.40)FreeNo changeNo changeOn or before 12/31/

.

.

Mechanical wrist watches

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.62 Mechanical wrist watches (other than those of heading ), with automatic winding, having over 17 jewels in the movement, with bracelet of stainless steel, whether or not gold- or silver-plated (provided for in subheading .21.70)FreeNo changeNo changeOn or before 12/31/

.

.

Mechanical wrist watches with leather or other band

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.63 Mechanical wrist watches (other than those of heading ), with automatic winding, having over 17 jewels in the movement, such watches with bracelet other than of textile material or of base metal (provided for in subheading .21.90)FreeNo changeNo changeOn or before 12/31/

.

.

Analog pocket watches

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.64 Analog pocket watches (other than those of heading ), electrically operated, having no jewels or only one jewel in the movement (provided for in subheading .91.40)FreeNo changeNo changeOn or before 12/31/

.

.

Projection alarm clocks, non-atomic

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.65 Electrically-operated alarm clocks, such clocks capable of displaying time, date, indoor humidity and indoor temperature, the foregoing including an integrated Universal Serial Bus (USB) charging port and a projection unit that projects time, whether or not also capable of projecting temperature (provided for in subheading .11.40) FreeNo changeNo changeOn or before 12/31/

.

.

Projection atomic alarm clocks

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.66 Electrically-operated atomic alarm clocks, such clocks capable of displaying time, date and temperature, the foregoing including an integrated Universal Serial Bus (USB) charging port and a projection unit that projects both time and temperature (provided for in subheading .11.40)FreeNo changeNo changeOn or before 12/31/

.

.

Analog wall clocks without thermometer, hygrometer, or barometer gauges

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.67 Analog wall clocks, each with a diameter measuring between 35 cm to 62 cm (provided for in subheading .21.80), the foregoing without thermometer, hygrometer or barometer gaugesFreeNo changeNo changeOn or before 12/31/

.

.

Analog clocks with thermometer and hygrometer

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.68 Analog clocks, each with a temperature gauge and a humidity gauge and a diameter measuring between 20 cm and 62 cm (provided for in subheading .21.80)FreeNo changeNo changeOn or before 12/31/

.

.

Atomic analog wall clocks

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.69 Electrically operated atomic wall clocks, designed to receive phase-modulated time code, the foregoing each with a stainless steel frame measuring approximately 35.56 cm in diameter and an analog display (provided for in subheading .21.80) FreeNo changeNo changeOn or before 12/31/

.

.

Atomic digital clocks

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.70 Electrically-operated atomic clocks, each with one or more opto-electronic displays to provide time, date and temperature, whether or not such clocks have an alarm function or a moon phase display; the foregoing each with openings on the back for wall-mounting and a pull-out stand for placement on flat surfaces (provided for in subheading .91.40) FreeNo changeNo changeOn or before 12/31/

.

.

Analog kitchen timers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.71 Analog kitchen timers, not battery or AC powered, each with dimensions not exceeding 6 cm by 12 cm by 24 cm, such timers designed to count down from 60 minutes and shut off automatically (provided for in subheading .90.85) FreeNo changeNo changeOn or before 12/31/

.

.

Wrist watch movements having over one jewel and less than 7 jewels

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.72 Complete watch movements, unassembled, having over one jewel but not over 7 jewels, measuring less than 33.8 mm in diameter (provided for in subheading .11.00) FreeNo changeNo changeOn or before 12/31/

.

.

Watch movements having over 7 jewels and under 17 jewels

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.73 Complete watch movements, unassembled, having over 7 jewels but not over 17 jewels, measuring less than 33.8 mm in diameter (provided for in subheading .11.00) FreeNo changeNo changeOn or before 12/31/

.

.

Watch cases or bodies over 41 mm in diameter

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.74 Watch cases of stainless steel, other than gold- or silver-plated, each measuring over 41 mm in width or diameter (provided for in subheading .20.40) FreeNo changeNo changeOn or before 12/31/

.

.

Watch cases or bodies not over 41 mm in diameter

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.75 Watch cases of stainless steel, other than gold- or silver-plated, each measuring not over 41 mm in width or diameter (provided for in subheading .20.40) FreeNo changeNo changeOn or before 12/31/

.

.

Watch case bezels, backs, and centers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.76 Watch case bezels, backs and centers, the foregoing not of precious metal or of metal clad with precious metal (provided for in subheading .90.50) FreeNo changeNo changeOn or before 12/31/

.

.

Watch case parts

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.77 Parts of watch cases, not of precious metal or of metal clad with precious metal, the foregoing other than watch bezels, backs and centers (provided for in subheading .90.70) FreeNo changeNo changeOn or before 12/31/

.

.

Stainless steel watch bracelets

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.78 Watch bracelets of stainless steel, whether or not gold- or silver-plated, valued over $100 per dozen (provided for in subheading .20.40) 4.1%No changeNo changeOn or before 12/31/

.

.

Watch dials

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.79 Watch dials, not exceeding 50 mm in width (provided for in subheading .30.40) 1%No changeNo changeOn or before 12/31/

.

.

Watch crowns

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.80 Watch crowns of stainless steel, each with a diameter greater than 3 mm but not exceeding 10 mm (provided for in subheading .90.40) FreeNo changeNo changeOn or before 12/31/

.

.

Watch hands

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.81 Watch hands of brass, designed to indicate hour, minute, second or counter (provided for in subheading .90.40) FreeNo changeNo changeOn or before 12/31/

.

.

Acoustic guitars

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.82 Acoustic guitars, valued not over $100 each, excluding the value of the case (provided for in subheading .90.20) 3.6%No changeNo changeOn or before 12/31/

.

.

Console digital pianos

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.83 Upright console digital pianos, the sound of which is produced, or must be amplified, electrically; each with one 88-key hammer action keyboard and valued at $100 or more (provided for in subheading .10.00) 4.5%No changeNo changeOn or before 12/31/

.

.

Grand digital pianos

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.84 Grand pianos, digital, each with one 88-key hammer action keyboard and valued $100 or more (provided for in subheading .10.00) 0.4%No changeNo changeOn or before 12/31/

.

.

Electronic 61-key keyboards

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.85 Electronic 61-key musical single keyboard instruments, each with folding stand and stool, weighing approximately 5.4 kg and valued $48 or more but not over $55 (provided for in subheading .10.00) FreeNo changeNo changeOn or before 12/31/

.

.

Electric guitars and acoustic/electric guitars

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.86 Electric guitars, designed to be amplified electronically, valued over $40 but not more than $200 per unit (provided for in subheading .90.00) 3.7%No changeNo changeOn or before 12/31/

.

.

Memory foam travel pillows

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.87 Travel pillows of viscoelastic polyurethane foam and with cover of polyester fabric, each pillow with a zipper and a hook-and-loop attachment and measuring 10 cm or more but not over 13 cm in height, 21 cm or more but not over 28 cm in length and 21 cm or more but not over 26 cm in width (provided for in subheading .90.20) FreeNo changeNo changeOn or before 12/31/

.

.

Lighting for wall installation

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.88 Electrical lighting fittings, of base metal other than of brass, such goods designed for permanent wall installation (provided for in subheading .10.60) 7%No changeNo changeOn or before 12/31/

.

.

Decorative bathroom fan assemblies (lighting fixtures) assemblies

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.89 Decorative bathroom fan globe assemblies (lighting fixtures), with base metal and glass, acrylic or polycarbonate lens or globe, the foregoing designed to be used exclusively for exhaust fan lights (provided for in subheading .10.80) FreeNo changeNo changeOn or before 12/31/

.

.

Metal household floor lamps

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.90 Electric household floor standing lamps, of base metal other than brass, each with an E26 socket (provided for in subheading .20.60) 5.7%No changeNo changeOn or before 12/31/

.

.

Solar powered pathway lights, each measuring between 36.8 cm and 42 cm in height

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.91 Solar powered pathway lights, of base metal other than of brass, having glass lenses, each measuring between 45 cm and 48 cm in height, containing a rechargeable 900 milliampere-hour (mAh) battery and LED lamp (provided for in subheading .40.60) FreeNo changeNo changeOn or before 12/31/

.

.

Solar powered pathway lights, each measuring between 45 cm and 48 cm in height

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.92 Solar powered pathway lights, of base metal other than of brass, having glass lenses, measuring between 36.8 cm and 42 cm in height, each containing a rechargeable 800 milliampere-hour (mAh) battery and a light-emitting diode (LED) lamp (provided for in subheading .40.60) FreeNo changeNo changeOn or before 12/31/

.

.

Exterior exit viewing lights, dual beam

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.93 Exterior exit viewing lights, of aluminum alloy, round in shape, with a diameter not more than 12.5 cm and a weight not over 0.3 kg, each containing a two light emitting diode, printed circuit board and electrical connector, the foregoing configured to be mounted to the exterior of an aircraft and designed for illuminating the ground contact areas for personnel in the event of an emergency landing (provided for in subheading .40.60) FreeNo changeNo changeOn or before 12/31/

.

.

LED flameless candles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.94 Light-emitting diode (LED) flameless pillar-shaped candles, of unscented wax, each incorporating a timer, with realistic flame movement and with remote control (provided for in subheading .40.84) FreeNo changeNo changeOn or before 12/31/

.

.

Aquarium LED light strands

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.95 Light-emitting diode (LED) low voltage lighting designed for use with aquarium tanks, each with from one to ten LED modules with three LED arrays, with power source and plastic housing to protect circuitry (provided for in subheading .40.84) FreeNo changeNo changeOn or before 12/31/

.

.

LED light modules for bathroom fans/lights

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.96 Light emitting diode (LED) lighting modules, each with DC output between 260 milliampere and 320 milliampere and designed to be used in the manufacture of a bathroom exhaust fan/light (provided for in subheading .40.84) FreeNo changeNo changeOn or before 12/31/

.

.

Aquarium LED light sticks

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.97 Light-emitting diode (LED) low voltage light sticks designed for use with aquarium tanks, ranging in length from 4 cm to 70 cm, including single and double light sticks with power source, with LED arrays distributed along the length of the stick, LEDs and circuitry protected by a clear plastic sealed tube (provided for in subheading .40.84) FreeNo changeNo changeOn or before 12/31/

.

.

Aquarium LED light strips

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.98 Light-emitting diode (LED) low voltage light strips designed for use with aquarium tanks, having protective housings of plastics or of aluminum, with LED arrays arranged in rows and columns, presented with power source, with plastic lens to protect circuitry (provided for in subheading .40.84) 1.7%No changeNo changeOn or before 12/31/

.

.

Decorative votive candle holders

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.32.99 Decorative candle holders other than of brass, each measuring 5 cm to 17.2 cm in height and 5 cm to 15.25 cm in diameter, weighing 6.2 g or more but not more than 2.7 kg, valued over $0.50 but not over $15 each (provided for in subheading .50.40) 3.9%No changeNo changeOn or before 12/31/

.

.

Candle jar shades

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.01 Decorative candle holder shades, other than of brass, each designed to fit on the top of a jar style candle holder (provided for in subheading .50.40) FreeNo changeNo changeOn or before 12/31/

.

.

Non-electrical lighting

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.02 Non-electrical lamps (luminaires) designed for wall mounting, of base metal other than of brass, each having a glass sleeve; the foregoing not including candle lamps (provided for in subheading .50.40) 5.8%No changeNo changeOn or before 12/31/

.

.

Outdoor garden or patio torches of bamboo construction

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.03 Outdoor garden torches, each comprising a dried bamboo pole supporting a compartment holding a fuel canister and wick, measuring 0.75 m to 1.6 m in height (provided for in subheading .50.40) FreeNo changeNo changeOn or before 12/31/

.

.

Outdoor garden or patio torches of non-bamboo construction

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.04 Outdoor garden torches, of any single material including base metal (other than brass), glass, ceramic or resin or a combination thereof; but not of bamboo; each incorporating a reservoir for fuel and a wick (provided for in subheading .50.40) 0.8%No changeNo changeOn or before 12/31/

.

.

Indoor oil lamps with base of glass or metal

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.05 Oil lamps, with a base of metal (other than of brass) or of glass, each lamp with wick holder, glass chimney and flat or round wick (provided for in subheading .50.40) FreeNo changeNo changeOn or before 12/31/

.

.

Outdoor garden torches for tabletop use

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.06 Outdoor garden torches for tabletop use, such torches of bamboo, metal other than brass, glass, ceramic or resin, each incorporating a woven wick (provided for in subheading .50.40) FreeNo changeNo changeOn or before 12/31/

.

.

Glass lens arrays for spotlights

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.07 Glass lens arrays, each molded to form 60 individual lenses on one side, each such lens measuring 10 mm in diameter, with a smooth reverse side, designed for insertion into an LED light fixture (provided for in subheading .91.60) FreeNo changeNo changeOn or before 12/31/

.

.

Lamp shades

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.08 Shades for lamps (luminaires), of vegetable fibers (provided for in subheading .99.40) 4.8%No changeNo changeOn or before 12/31/

.

.

Galvanized steel LED downlight housing frames

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.09 Housing frames of galvanized steel (bare metal), designed for use in light emitting diode (LED) downlights (provided for in subheading .99.40) 4.8%No changeNo changeOn or before 12/31/

.

.

Aluminum cylinders for LED lighting fixtures

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.10 Cylinders of aluminum, designed for light emitting diode (LED) lighting fixtures (provided for in subheading .99.40) 4%No changeNo changeOn or before 12/31/

.

.

Galvanized steel brackets and plates for LED lighting fixtures

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.11 Brackets and plates of galvanized steel, designed for use with light emitting diode (LED) lighting fixtures (provided for in subheading .99.40) 3.5%No changeNo changeOn or before 12/31/

.

.

Aluminum LED downlight reflectors

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.12 Reflectors of aluminum, designed for light emitting diode (LED) downlights (provided for in subheading .99.40) 3.5%No changeNo changeOn or before 12/31/

.

.

Outdoor garden torch replacement canisters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.13 Canisters designed for outdoor garden torches, of base metal other than brass, each incorporating a wick and flameguard (provided for in subheading .99.40) FreeNo changeNo changeOn or before 12/31/

.

.

Iris subassemblies for moving lights

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.14 Iris subassemblies, each consisting of two or more parts or pieces fastened or joined together, including an adjustable opening, the foregoing designed for controlling the dimensions of a beam produced by an automated moving light fixture (provided for in subheading .99.40) FreeNo changeNo changeOn or before 12/31/

.

.

Zoom modules for automated moving lights

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.15 Zoom modules, each consisting of two or more parts or pieces fastened or joined together, including rails or lenses, such modules each designed for moving the lenses of an automated moving light fixture (provided for in subheading .99.40) FreeNo changeNo changeOn or before 12/31/

.

.

Golf club heads for fairway woods

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.16 Golf club heads designed for clubs designated as fairway woods (provided for in subheading .39.00) FreeNo changeNo changeOn or before 12/31/

.

.

Golf club shafts for putters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.17 Golf club shafts, designed for use with putters (provided for in subheading .39.00), the foregoing other than goods described in any other heading of this subchapter FreeNo changeNo changeOn or before 12/31/

.

.

Steel golf club shafts, other than for putters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.18 Golf club shafts of steel, other than those designed for use with putters (provided for in subheading .39.00) FreeNo changeNo changeOn or before 12/31/

.

.

Golf club shaft assemblies

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.19 Golf club shaft assemblies, each comprising a graphite golf shaft with a grip attached by adhesive tape and a loft adapter attached by glue (provided for in subheading .39.00), the foregoing other than goods described in any other heading of this subchapter FreeNo changeNo changeOn or before 12/31/

.

.

Graphite driver golf club shafts, extra stiff flex

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.20 Golf club shafts of graphite, designed for use with driver and/or fairway wood clubs, the forgoing measuring from approximately 106.7 cm to 121.9 cm, of extra stiff flexibility as denoted by a letter code of 'X' or 'TX' imprinted on the shaft (provided for in subheading .39.00), the foregoing other than goods described in any other heading of this subchapter FreeNo changeNo changeOn or before 12/31/

.

.

Graphite hybrid golf club shafts, extra stiff flex

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.21 Golf club shafts of graphite, designed for use with hybrid clubs, the forgoing measuring from approximately 101.6 cm to 106.6 cm, of extra stiff flexibility as denoted by a letter code of 'X' or 'TX' imprinted on the shaft (provided for in subheading .39.00), the foregoing other than goods described in any other heading of this chapter FreeNo changeNo changeOn or before 12/31/

.

.

Graphite irons golf club shafts, extra stiff flex

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.22 Golf club shafts of graphite, designed for use with irons, each measuring from approximately 88.9 cm to 101.5 cm, of extra stiff flexibility as denoted by a letter code of 'X' or 'TX' imprinted on the shaft (provided for in subheading .39.00) FreeNo changeNo changeOn or before 12/31/

.

.

Graphite driver golf club shafts, regular, senior, adult, or ladies flex

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.23 Golf club shafts of graphite, designed for use with driver and/or fairway wood clubs, each measuring from approximately 106.7 cm to 121.9 cm, of regular, light, senior, adult and/or ladies flexibility as denoted by a code of 'R', 'L', 'A', 'M', 'AM', 'A/M', 'F2', 'F3', '5.0', '5.', or 'Senior' imprinted on the shaft (provided for in subheading .39.00), the foregoing not described in any other heading of this subchapter 2.3%No changeNo changeOn or before 12/31/

.

.

Graphite golf club driver shafts, stiff flex

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.24 Golf club shafts of graphite, designed for use with driver and/or fairway wood clubs, each measuring from approximately 106.7 cm to 121.9 cm, of stiff flexibility denoted by a letter code 'S', 'SR', 'TS', '6.0', '6.5' or 'F4' imprinted on the shaft (provided for in subheading .39.00), the foregoing presented without loft adapter FreeNo changeNo changeOn or before 12/31/

.

.

Graphite hybrid golf club shafts, regular, senior, adult, or ladies flex

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.25 Golf club shafts of graphite, designed for use with hybrid clubs, each measuring from approximately 101.6 cm to 106.6 cm, such shafts of regular, light, senior, adult and/or ladies flexibility as denoted by a code of 'R', 'L', 'A', 'M', 'AM', 'A/M', 'F2', 'F3', '5.0', '5.5' or 'Senior' imprinted on the shaft (provided for in subheading .39.00), the foregoing not described in any other heading of this subchapter FreeNo changeNo changeOn or before 12/31/

.

.

Graphite hybrid golf club shafts, stiff flex

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.26 Golf club shafts of graphite, designed for use with hybrid clubs, the foregoing measuring approximately 101.6 cm to 106.6 cm in length, of stiff flexibility as denoted by a letter code of 'S', 'SR', 'TS', '6.0', '6.5' or 'F4' imprinted on the shaft (provided for in subheading .39.00) FreeNo changeNo changeOn or before 12/31/

.

.

Graphite irons golf club shafts, regular, senior, adult, or ladies flex

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.27 Golf club shafts of graphite, designed for use with irons meaning the foregoing measuring from approximately 88.9 cm to 101.5 cm, each having regular, light, senior, adult, and/or ladies flexibility as denoted by a letter code of 'R', 'L', 'A', 'M', 'AM', 'A/M', 'F2', 'F3', '5.0', '5.5' or 'Senior' imprinted on the shaft (provided for in subheading .39.00)" 2.9%No changeNo changeOn or before 12/31/

.

.

Graphite irons golf club shafts, stiff flex

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.28 Golf club shafts of graphite, designed for use with irons, each measuring from approximately 88.9 cm to 101.5 cm, of stiff flexibility as denoted by a letter code of 'S', 'SR', 'TS', '6.0', '6.5'or 'F4' imprinted on the shaft (provided for in subheading .39.00), the foregoing other than goods described in any other heading of this subchapter FreeNo changeNo changeOn or before 12/31/

.

.

Pickleball paddles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.29 Pickleball paddles or rackets (provided for in subheading .59.80) FreeNo changeNo changeOn or before 12/31/

.

.

Pickleballs

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.30 Noninflatable hollow pickleballs, each measuring not over 19 cm in diameter (provided for in subheading .69.40) FreeNo changeNo changeOn or before 12/31/

.

.

Exercise cycles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.31 Upright, recumbent and semi-recumbent exercise cycles (provided for in subheading .91.00), the foregoing other than goods described in any other heading of this subchapter 4.5%No changeNo changeOn or before 12/31/

.

.

Stationary trainers

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.32 Bicycle stationary trainers, designed to hold bicycles upright and off-ground, each with 2 sections: a front stand with a clamp to attach to a bicycle's steering column and a molded plastic piece to capture the front wheel, and a rear section that attaches to the bicycle's rear axle having a resistance unit on which the rear wheel sits (provided for in subheading .91.00) FreeNo changeNo changeOn or before 12/31/

.

.

Multimodality fitness equipment, without integrated contact grip heart rate monitor

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.33 Fitness equipment, each with pivoting handles and foot pedals that perform alternating movements which combine the motions of a stepper and an elliptical machine, driving simultaneously a radial fan and magnetic brake in the base, such equipment without integrated contact grip heart rate monitor and weighing less than 90 kg (provided for in subheading .91.00) FreeNo changeNo changeOn or before 12/31/

.

.

Multimodality fitness equipment with integrated power sensor to measure the user's upper body power input

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.34 Fitness equipment, each unit with pivoting handles and foot pedals that allow the user to perform alternating movements which combine the motions of a stepper and an elliptical machine, and driving simultaneously a radial fan and magnetic brake in the base; each weighing less than 90 kg and equipped with integrated contact grip heart rate monitor and integrated power sensor to measure the user's upper body power input (provided for in subheading .91.00) FreeNo changeNo changeOn or before 12/31/

.

.

Parts and accessories for treadmills

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.35 Parts and accessories (other than display consoles) of treadmills (provided for in subheading .91.00) FreeNo changeNo changeOn or before 12/31/

.

.

Parts and accessories for ellipticals

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.36 Parts and accessories (other than display consoles) of elliptical fitness machines that use a forward and backward pedaling motion with adjustable vertical incline (provided for in subheading .91.00) FreeNo changeNo changeOn or before 12/31/

.

.

Parts and accessories for stationary exercise cycles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.37 Parts and accessories (other than display consoles) of stationary exercise cycles (provided for in subheading .91.00) 1.2%No changeNo changeOn or before 12/31/

.

.

Parts and accessories for weight training equipment

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.38 Parts of and accessories for dumbbells and other weight and strength training equipment (for example, resistance gyms) (provided for in subheading .91.00) FreeNo changeNo changeOn or before 12/31/

.

.

Parts and accessories for certain exercise equipment machines

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.39 Parts of and accessories for (other than display consoles) indoor aerobic fitness equipment, other than such goods for treadmills, stationary exercise cycles and ellipticals using forward and backward pedaling motion with adjustable vertical incline (provided for in subheading .91.00) FreeNo changeNo changeOn or before 12/31/

.

.

Lateral elliptical machines

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.40 Fitness equipment, each with pivoting handles and vertical stationary grips, with suspension pedals that move in a lateral elliptical motion to drive a magnetic resistance assembly in the base, presented with contact grip heart rate monitor (provided for in subheading .91.00) FreeNo changeNo changeOn or before 12/31/

.

.

Adjustable-weight kettlebells

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.41 Adjustable-weight kettlebells, each with rotating dial for selecting interlocking integrated weight plates within a designated weight range and presented with a separable base for holding unused weight plates (provided for in subheading .91.00) FreeNo changeNo changeOn or before 12/31/

.

.

Adjustable-weight barbell

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.42 Adjustable-weight barbells, each with rotating selection end dials for selecting interlocking, integrated weight plates within a designated weight range, whether or not also including additional weight plates, adjustable-weight curl bar or specially designed stand (provided for in subheading .91.00) FreeNo changeNo changeOn or before 12/31/

.

.

Exercise cycles with dual-position handgrips

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.43 Stationary wind-resistance exercise cycles, each with pivoting handlebars with dual-position horizontal handgrips and rotating foot pedals that drive a large, caged axial fan (provided for in subheading .91.00), the foregoing other than goods described in any other heading of this subchapter FreeNo changeNo changeOn or before 12/31/

.

.

Exercise cycles with single handgrips

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.44 Stationary wind-resistance exercise cycles, each with pivoting handlebars and single horizontal handgrips, with rotating foot pedals that drive a large, caged axial fan (provided for in subheading .91.00), the foregoing other than goods described in any other heading of this subchapter 0.5%No changeNo changeOn or before 12/31/

.

.

Upright exercise cycles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.45 Upright stationary exercise cycles, each having an enclosed magnetic brake system, fitted with connectors for and designed to incorporate a touchscreen console, whether or not presented with the touchscreen console (provided for in subheading .91.00), the foregoing other than goods described in any other heading of this subchapter FreeNo changeNo changeOn or before 12/31/

.

.

Recumbent exercise cycles with touchscreen consoles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.46 Recumbent stationary exercise cycles, each having an enclosed magnetic brake system, fitted with connectors for and designed to incorporate a touchscreen console, whether or not presented with such touchscreen console (provided for in subheading .91.00), the foregoing other than goods described in any other heading of this subchapter FreeNo changeNo changeOn or before 12/31/

.

.

Leaning exercise cycles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.47 Stationary exercise cycles, each comprising a bicycle component connected to a base frame by pivots designed to partially rotate the bicycle component on a longitudinal axis, moving it side-to-side in response to the shifting weight of the user to simulate the rocking motion of an outdoor road bicycle (provided for in subheading .91.00), the foregoing other than goods described in any other heading of this subchapter 1.1%No changeNo changeOn or before 12/31/

.

.

Rod gyms, with vertical bench

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.48 Full-body strength training fitness equipment (home gyms), each incorporating a vertical bench, a removable, adjustable seat, an attached backrest and a detachable leg extension/leg curl attachment, the foregoing each with interchangeable hand grips to connect to a cable and pulley system designed to employ flexible resistance rods, whether or not presented with such flexible rods (provided for in subheading .91.00) FreeNo changeNo changeOn or before 12/31/

.

.

Rod and resistance gyms, with flat benches

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.49 Full-body strength training fitness equipment (home gyms), each with flat bench, sliding seat and removable backrest, equipped with interchangeable hand grips to connect to a cable and pulley system designed to employ flexible resistance rods or torsion resistance plates, whether or not presented with rods or plates (provided for in subheading .91.00) FreeNo changeNo changeOn or before 12/31/

.

.

Foldable treadmills, with LCD consoles with control keypads

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.50 Foldable treadmills, each with a button-release locking mechanism required for folding the running deck for storage and releasing from the storage position for use, capable of wireless data exchange and incorporating a liquid crystal display console with control keypad (provided for in subheading .91.00) FreeNo changeNo changeOn or before 12/31/

.

.

Foldable treadmills, with touchscreen consoles measuring 44.5 cm or less

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.51 Foldable treadmills, each equipped with a button-release locking mechanism required for folding the running deck for storage and releasing from the storage position for use, capable of wireless data exchange and incorporating a touchscreen console having a diagonal display size measuring 44.5 cm or less (provided for in subheading .91.00) FreeNo changeNo changeOn or before 12/31/

.

.

Indoor cycling machines with wireless data touchscreen displays

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.52 Stationary indoor cycling exercise cycles, each with a frame designed to simulate the user's body position and pedaling of an outdoor road bicycle, with visible flywheel, equipped with an adjustable magnetic brake to resist rotation of the flywheel, manual emergency braking mechanism and interactive touchscreen display capable of wireless data exchange and two water bottle holders (provided for in subheading .91.00), the foregoing other than goods described in any other heading of this subchapter FreeNo changeNo changeOn or before 12/31/

.

.

Indoor cycling machines with LCD consoles and two water bottle holders

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.53 Stationary indoor cycling exercise cycles, each with a frame designed to simulate the user's body position and pedaling of an outdoor road bicycle, with visible flywheel, equipped with an adjustable magnetic brake to resist rotation of the flywheel, manual emergency braking mechanism, liquid crystal display console, wireless data exchange capability and two water bottle holders (provided for in subheading .91.00), the foregoing other than goods described in any other heading of this subchapter FreeNo changeNo changeOn or before 12/31/

.

.

Indoor cycling machines with LCD consoles and single water bottle holder

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.54 Stationary indoor cycling exercise cycles, each with frame designed to simulate the user's body position and pedaling of an outdoor road bicycle, with visible flywheel, equipped with an adjustable friction pad brake to resist rotation of the flywheel, manual emergency braking mechanism, liquid crystal display console and single water bottle holder (provided for in subheading .91.00), the foregoing other than goods described in any other heading of this subchapter 1.4%No changeNo changeOn or before 12/31/

.

.

Recumbent elliptical machines

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.55 Recumbent seated fitness equipment, each with pivoting closed-loop handles that perform alternating movements and foot pedals that move in an elliptical motion, driving a resistance assembly in the base, with optional-use stationary foot supports for enhanced upper body workout (provided for in subheading .91.00) FreeNo changeNo changeOn or before 12/31/

.

.

Fitness equipment combining the functions of an elliptical and a stair stepper, weight over 90 kgs

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.56 Fitness equipment, each with pivoting handles and foot pedals that perform alternating movements combining the motions of a stepper and an elliptical machine, driving simultaneously a radial fan and magnetic brake in the base, equipped with a lever for the manual adjustment of resistance levels, weighing over 90 kgs (provided for in subheading .91.00) FreeNo changeNo changeOn or before 12/31/

.

.

Foldable treadmills with touchscreen console greater than 44.4 cm

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.57 Foldable treadmills, each equipped with a button-release locking mechanism required for folding the running deck for storage and releasing the deck from the storage position for use; such treadmills capable of wireless data exchange and each incorporating a touchscreen console having a diagonal display measuring over 44.4 cm (provided for in subheading .91.00) 0.5%No changeNo changeOn or before 12/31/

.

.

Interactive indoor cycling exercise cycles

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.58 Interactive indoor cycling exercise cycles, capable of wireless data exchange, simulating the movement of outdoor cycling, employing dynamic inertia magnetic resistance and an electromotor brake system within an enclosed plastic four-legged base and incorporating curved drop handlebars with electronic gear shifters, dual interactive air fans, tablet mount and a workout session performance display (provided for in subheading .91.00), the foregoing other than goods described in any other heading of this subchapter FreeNo changeNo changeOn or before 12/31/

.

.

Multimodality fitness equipment, with integrated contact grip heart rate monitors

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.59 Fitness equipment, each with pivoting handles and foot pedals that perform alternating movements which combine the motions of a stepper and an elliptical machine, driving simultaneously a radial fan and magnetic brake in the base, the foregoing weighing less than 90 kg and equipped with integrated contact grip heart rate monitor (provided for in subheading .91.00) FreeNo changeNo changeOn or before 12/31/

.

.

Fishing reels valued not over $2.70 each, pre-spooled, with rod and fishing line

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.60 Fishing rods, each presented with a fishing reel valued not over $2.70 each, pre-spooled with fishing line, the foregoing put up for retail sale as a complete kit each comprising one rod and one reel (whether or not containing other accessories), with each kit having an aggregate value of no more than $30 (provided for in subheading .30.20) 5.9%No changeNo changeOn or before 12/31/

.

.

Fishing reels valued not over $2.70 each

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.61 Fishing reels valued not over $2.70 each (provided for in subheading .30.20) 5.7%No changeNo changeOn or before 12/31/

.

.

Hard artificial crankbaits

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.62 Artificial baits of rigid plastics, each with two or more treble hooks attached and with wire loops at the top or front end for attaching fishing line, such baits shaped to approximate bait fish, whether or not having a plastic lip at the bottom front end, the foregoing put up for retail sale and valued not over $20 each; such goods excluding baits with a blunt front end and excluding baits with a torpedo shape (provided for in subheading .90.70) 3.8%No changeNo changeOn or before 12/31/

.

.

Collapsible big game decoys

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.63 Foldable decoys, each depicting birds or wildlife, constructed from two or more layers of printed textile fabric of polyester supported by a metal spring band system (provided for in subheading .90.80) 0.3%No changeNo changeOn or before 12/31/

.

.

Vacuum steel hinged lid pitchers, not exceeding 1 liter

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.64 Insulated thermal pitchers, each with stainless steel interior and exterior, with hinged stainless steel lid, no separate base and a capacity not exceeding 1 liter (provided for in subheading .00.10) FreeNo changeNo changeOn or before 12/31/

.

.

Vacuum insulated drinkware having a capacity exceeding 1 liter but not exceeding 2 liters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.65 Stainless steel vacuum insulated drinkware, double-walled, and complete with cases, having a capacity exceeding 1 liter but not exceeding 2 liters (provided for in subheading .00.30) 6.1%No changeNo changeOn or before 12/31/

.

.

Vacuum insulated drinkware having a capacity exceeding 2 liters but not exceeding 4 liters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.66 Stainless steel vacuum insulated drinkware, double-walled, having a capacity exceeding 2 liters but not exceeding 4 liters, complete with cases (provided for in subheading .00.40) 4.9%No changeNo changeOn or before 12/31/

.

.

Vacuum glass lined steel coffee servers over 2 liters

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.67 Insulated coffee servers, each with exterior of stainless steel and vacuum liner of glass, with a hinged brew-through lid with push-button dispensing, such servers with seamless design and without separate base; the foregoing with capacity over 2 liters (provided for in subheading .00.40) FreeNo changeNo changeOn or before 12/31/

.

.

Vacuum glass lined steel coffee servers over 2 liters with lever dispensing

Subchapter II of chapter 99 is amended by inserting in numerical sequence the following new heading:

.33.68 Insulated vacuum coffee servers, each with exterior layer of stainless steel and liner of glass, with a hinged brew-through lid with lever action dispensing, such servers without separate base; the foregoing with capacity over 2 liters (provided for in subheading .00.40) FreeNo changeNo changeOn or before 12/31/

.

For more information, please visit Calcium Dodecylbenzene Sulfonate.