SwiftSet Self-Leveler is a fast setting (2-4 hours) and walkable in (4- 6 hours), pre-sanded, single component just add water, polymer enhanced, Portland cement and proprietary additive self-leveling underlayment or base coat mix used to create a smooth flat and level surfaces for the installation of various flooring types.

KDOCEL contains other products and information you need, so please check it out.

SwiftSet Self Leveler is used to repair or level low spots in concrete substrates. SwiftSet Self-Leveler creates a strong physical & chemical bond to a concrete substrate with the use of Stone Edge Surfaces Primer 100, and you can achieve a deeper fill by adding aggregate.

SwiftSet Self-Leveler is for indoor or outdoor use, is ASTM E84 fire rated and dries to over 7,000 psi.

The following Averages vary by thickness, temp, etc.

• Set Time, 2-4 hours
• Walkable in 4-6 hours.
• Floor Coverings in 4'8 hours (non-moisture sensitive).
• Floor Covering 16-24 hours (moisture sensitive).
• Polishing 3 to 7 days.
• Driveable in 24-48 hours.

Most Common Uses

• Smooth, Flat Level surface for the installation of tile, carpet and other flooring types.
• Flat smooth walkable or driveable surface
• Concrete Driveways, Walkways, Garages, Patio Refurbish
• Commercial: Concrete Parking Structures & Garages
• Sound and fire and smoke mitigation when combined with other sound mitigating materials

One Stop WB Epoxy Primer ' High-Performance 2-Part Water-Based Epoxy Primer

One Stop WB Epoxy Primer is a self-priming, two-component epoxy primer designed to enhance adhesion, protect against moisture, and create a durable foundation for epoxy and polyaspartic flooring systems. Formulated for concrete floors and interior concrete block walls, this high-performance primer delivers superior adhesion, water resistance, and scratch resistance while remaining VOC-compliant.

Its 3:1 mix ratio ensures strong bonding properties, making it the preferred primer for metallic floors, solid color coatings, and full flake epoxy systems. Versatile and easy to apply, One Stop WB Epoxy Primer is ideal for commercial, industrial, and high-traffic applications, ensuring a long-lasting, professional-grade finish.

Key Features & Benefits

• High-Bond Strength ' Improves adhesion to concrete, ensuring a durable, long-lasting flooring system.
• Mosture & Water Resistant ' Acts as a moisture-mitigating barrier, reducing the risk of coating failure.
• Scratch & Abrasion Resistant ' Provides a tough, protective base that withstands heavy foot and vehicle traffic.
• Compatible with Multiple Coatings ' Works with solvent-based urethane, water-based urethane, 100% solids self-leveling epoxy, and metallic epoxy systems.
• Multi-Surface Application ' Approved for concrete, wood, and laminate countertops as well as interior concrete walls.
• Easy Mixing & Application ' Simple 3:1 mix ratio with smooth, low-viscosity application.

Recommended Uses

• Retail & Commercial Flooring ' Ensures strong adhesion for high-traffic epoxy floors.
• Garage & Showroom Floors ' Used as a base coat for metallic and full flake systems.
• Industrial & High-Traffic Spaces ' Provides a stable foundation for heavy-duty coatings.
• Restaurants & Bars ' Resists moisture, spills, and daily wear.
  Automotive Service Areas ' Tough enough to withstand chemicals, oil, and vehicle traffic.
• Aircraft Hangars ' A reliable primer for aviation-grade epoxy coatings.
  Schools & Universities ' Long-lasting performance in high-use environments.
  Commercial Kitchens ' Waterproof and resistant to cleaning chemicals.

Surface Preparation & Priming

Concrete must be diamond ground to CSP-3 to ensure proper adhesion.
Vacuum all dust and debris before application.
Wipe surface with denatured alcohol to remove contaminants.

Mixing Instructions

Partial Kits: Mix 3 Parts A to 1 Part B by volume at low speed for 2 minutes.
Full Kits: Pour Part B into pre-measured Part A, mix with a Jiffy Mixer for 2 minutes, avoiding air entrapment.

If you want to learn more, please visit our website Self Leveling Compound Basecoat Primer.

Application Instructions

Pour mixed primer onto the floor and spread evenly with a squeegee.
For smaller projects, dip and roll with a 3/8' epoxy roller for uniform coverage.

Coverage Per Kit = Concrete: 200-250 sq. ft. per kit

Dry Time & Recoat Schedule

Tack-Free / Foot Traffic: 12 hours
Recoat Time: 24 hours
Heavy Foot Traffic: 48 hours
Vehicular Traffic: 3 days

Before recoating, lightly sand the surface and wipe down with denatured alcohol or acetone.

ORDER ONE STOP WB EPOXY PRIMER TODAY!

Ensure strong adhesion and superior moisture resistance with One Stop WB Epoxy Primer'the foundation of a long-lasting epoxy floor system.

Are you interested in learning more about High strength cement self-leveling compound? Contact us today to secure an expert consultation!